Question about 2002 Toyota Camry

1 Answer

Starter went out i have a replacement how do i do it?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,033 Answers

First off do you know where your starter is. Once you do, the wheel and inner fender well will make it easier to remove the starter if you remove these also. But sometimes not necessary.
1. Disconnect the battery
2. put car on jack stands or a floor jack with wheel blocks.
3. unbolt the RED cable from the starter keeping in mind where it goes.
4. Disconnect all the other wires on the starter.
Now you can start removing the bolts that hold the start in. 3-4 bolts.
5. Now you can start installing your new start..


It's a simple job and nothing to be afraid of messing up, You'll give yourself a hug once you do it. Good Luck

Posted on Aug 28, 2010

Testimonial: "Thank you so much it was alot easier than i thought."

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to change a starter


What year, make and model of car are you wanting to change the starter on? Have you ever replaced a starter before to know the basics?

Nov 21, 2016 | Cars & Trucks

1 Answer

Need to replace the starter


remove the battery terminals, remove wires from starter, remove starter, replace with new starter, hook wires back up to starter and battery. Remember where the wires go as you take them off, once you mix them up, its hard to figure out where they went if you don't take a mental note or lable them with masking tape etc.

Dec 17, 2013 | 2003 GMC Envoy

1 Answer

I went to crank my car this morning and it will not turn over. i have tried jumping it off and nothing so i think the starter has went out


IT SOUNDS LIKE STARTER BUT MAKE SURE YOU BATTERY POST ARE CLEAN , IF DIRTY YOU CANT JUMP START , SO CHECK BEFORE YOU REPLACE THE STARTER

Jan 18, 2011 | 2006 Chevrolet Uplander

1 Answer

I have a 2004 hyundai accent. the starter went bad two weeks ago, and a friend and I replaced it. (it wnt without warning ) The other day, it went again. I'm told it could be in the ignition. That it's not...


if this starter "went bad" by refusing to work (run)
replace your ignition switch: it's behind the ignition lock on the steering column.
ignitions do not tell starters to do anything: the ignition switch key turns the starter on and, a spring returns the key to off when you release it turning the starter off.

Jul 19, 2010 | Hyundai Motor 2004 Accent

1 Answer

Replaced starter in 97 lumina no power


check your fudes under the hood and under drivers side dash

Sep 05, 2009 | 1997 Chevrolet Lumina

1 Answer

Starter replaced now wont start


You sure the wires are on right, and not shorting against something? Is that one of the ones you have to do from underneath, and nearly tear the whole car apart to get to it?

Aug 27, 2009 | Chevrolet Lumina Cars & Trucks

1 Answer

Engine died while driving and now wont start


starte went out , starter solinoid went out test it and replace starter if bad---

Jul 02, 2009 | 2003 Kia Rio

2 Answers

Periodic no-start


You have worn contacts on the starter solenoid. This is a rather common problem. Attempting to start it 2-3 times moves the contact slightly, and then it starts, by making good contact. You have 2 options: 1) Replace the starter and 2) remove the starter, and have the contacts replaced by a starter rebuilding service. The 2nd option would be the cheapest rout, as opposed to a replacement starter. Hope this helps you out.
Thanks for choosing FixYa for assistance!

Jan 31, 2009 | 1995 Toyota Camry

Not finding what you are looking for?
2002 Toyota Camry Logo

Related Topics:

73 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

75077 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7768 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...