Question about 1996 Plymouth Voyager

2 Answers

Where do you relieve the fuel pressure at when changing the fuel filter on a 1996 Plymouth Voyager with a 3.3L engine (short wheel base)

Posted by on


2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert who has answered 20 questions.


    An expert that has over 10 points.


    An expert whose answer got voted for 2 times.

  • Expert
  • 115 Answers

There is no pressure regulator only one is built into the fuel tank to relive the pressure look on fuel rail for a small valve looks like a valve stem similar to tires stem it as a black plastic cover unscrew that and push with a pointy object

Posted on Aug 28, 2010

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert whose answer got voted for 500 times.

  • Master
  • 1,978 Answers

The fuel filter on my 1993 grand voyager was in the middle of the car underneath. I don't remember any real fuel pressure in the line when I changed mine. I just put a pan under the filter unplugged it and connected the new one.

Posted on Aug 28, 2010


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

How to relieve gas pressure off fuel filter of 1994 2.2 liter plymouth sundance

disconnect power supply to fuel pump, then start engine when engine stalls fuel pressure released

Jun 02, 2012 | 1994 Plymouth Sundance

1 Answer

How do you remove a fuel pump on a 97 plymouth grand voyager

    • 1 Make sure the engine is completely cool. Relieve the pressure in the fuel system. Disconnect the negative battery cable. Elevate the vehicle and support the fuel tank with a jack.
    • 2 Disconnect the fuel line from the front of the tank. Remove the ground strap, the inboard side fuel tank straps and the front T-strap fastener, then lower the tank approximately six inches.
    • 3 Take the fuel lines from the fuel pump module. Plug the fuel lines with golf tees to prevent the spillage of gasoline. Remove the fuel filter.
    • 4 Install the new fuel filter. Set the bolts in place and torque them to 40 inch/pounds. Tighten the main tank straps to 40 foot/pounds and the T-strap to 250 inch lbs.
    • 5 Reconnect the fuel lines in the reverse order of their removal. Lower the vehicle. Connect the negative battery cable.
    • 6 Start the engine and let it run for several minutes. Inspect the fuel lines for any leaks.

Read more: How to Replace a Fuel Filter in a Plymouth Voyager '

Aug 27, 2011 | 1997 Plymouth Voyager

1 Answer

Does a 1999 Plymouth Voyager van have a fuel filter?

Yes it does, It is located on the side of the fuel tank. You will need to lower the tank to disconnect the fuel lines. If you attempt to change this yourself be sure to disconnect the battery first. Also you will want to relieve the fuel pressure before removing the filter so that you don't get covered in fuel. I highly recommend that you go to a local parts store and purchasing a repair manual this will save you alot of problems the book cost around $25 dollars. Or find a local mechanic to do this for you most will charge around $25 labor only if there honest. Good luck

Jan 18, 2011 | 1999 Plymouth Voyager

1 Answer

How do i change the fuel filter on 1995 plymouth voyager?

The line is under pressure so be careful when removing the fliter. You should be able to find the fuel pressure test port on the fuel rail under the hood. If you press in the schrader valve it will relieve the fuel pressure in the line and make it less likely to end up in your face when you finally remove the filter.

The filter is located under the vehicle on the passenger side about in the middle.

There will be two short sections of hose on each side of the old filter. Replace those sections of hose. Higher end filters usually come with the hose pieces. Use new fuel hose clamps. They are different than the regular hose clamps and do a much better job of keeping the hoses secure.

Sep 24, 2010 | Plymouth Voyager Cars & Trucks

1 Answer

Where is the fuel filter on a 1997 plymouth grand voyager

Where do you relieve the fuel system pressure at?

Jun 22, 2010 | 1997 Plymouth Grand Voyager

1 Answer


The fuel filter is either on the left side of the firewall or next to the fuel pump near the left side of the fuel tank.
  1. Before servicing the vehicle, refer to the Precautions section.
  2. Relieve the fuel system pressure.
  3. Remove or disconnect the following:

    Negative battery cable Fuel filler cap Fuel lines from the fuel filter Fuel filter from the bracket

Jun 22, 2010 | 1996 Plymouth Grand Voyager

1 Answer

Where is the fuel filter located on a 1996 Plymouth Grand Voyager 3.0 Engine

For 1996 Plymouth Truck Grand Voyager 2WD 3.0L MFI 6cyl the Fuel Filter is located under vehicle, driver side, below seating area, front of fuel tank, mounted on chassis in fuel line.

Hope help with this (remember rated this).

May 11, 2010 | Cars & Trucks

1 Answer

How do I change the fuel filter on my 94 plymouth voyager

open gas cap to relieve pressure take a rag and small container and tools [open end wrenches] and under van by fuel tank follow fuel line and will see fuel filter disconnect old unbolt holding clip and install the rag is to clean debris from around filter and container is to catch to gas drips

Jan 18, 2010 | Plymouth Voyager Cars & Trucks

1 Answer

Fuel filter location 1996 plymouth voyager and what will i need to replace it besides the filter

Just getting ready to do this fix as well. The filter is located under the car beneath the drivers seating area. You have to release pressure in the system by taking the gas cap off and releasing the pressure at the valve on the fuel injection rail. After that it's just three slip connectors and a screw / bolt to remove and replace.

Oct 11, 2009 | 1996 Plymouth Voyager

1 Answer

Engine light codes p0352, p0300, and p1391

po352 is ignition coil B primary/secondary circuit malfunction---ignition coil #2----p0300 is random /multible cylinder missfire, muti cylinder missfire detected!!

May 17, 2009 | 1996 Plymouth Voyager

Not finding what you are looking for?
1996 Plymouth Voyager Logo

Related Topics:

121 people viewed this question

Ask a Question

Usually answered in minutes!

Top Plymouth Experts


Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8270 Answers

Are you a Plymouth Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides