Question about 2004 Toyota Corolla

1 Answer

What is the nut size at the end of a cv joint of a 2004 toyota corolla s

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,297 Answers

I am assuming you are talking about the axle nut?

most are a 28mm

Posted on Aug 28, 2010

  • hall71792 Oct 04, 2010

    it is 30mm

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Clunking when taking a sharp right or left turn


Sue, normally a faulty CV joint, $300/$400 job, may be done cheaper if you shop around or supply the part. links below tell more.
to show your appreciation press the helpful button and follow me on fixya for more tips and info.

CV Joint how it works symptoms problems

Front Axle Shaft Replacement Cost for Toyota Corolla RepairPal Estimate

How to Know If CV Joint Is Bad

http://www.autopartswarehouse.com/shop_parts/axle_assembly/toyota/corolla.html

Feb 15, 2016 | 2010 Toyota Corolla

1 Answer

How to replace a cv joint in a 2004 corolla?


The usual approach here is to put in an exchange driveshaft with new CV joints both ends and new boots. It involves minimum labour which is cheaper, and it is best to do both sides unless you know only one side is no good.

May 31, 2014 | 2004 Toyota Camry

2 Answers

I am getting a vibration on my corolla 101 after changing a transmission. What can cause this?


Universal joint, Drive shaft not fitted correctly. Wheel balance. CV joint.

Sep 08, 2011 | Toyota Corolla Cars & Trucks

1 Answer

Dashboard warning light second on the dash board of a Toyota corolla E110 series we have replaced CV joints and i think there are slightly different in either the size or the sharp but the tooth are...


Hi P,
I think that the warning light that has come on is the ABS warning light. If you look at the CV joint which has been removed from your vehicle, you'll see a ring gear that looks like a cog on the widest part of the old CV joint. That cog ring should be carefully removed and then fitted to the new CV joint. That's the rotor which sends an electrical pulse to the ABS system. Without it the Abs system can't work.
Please rate this answer
Best regards Johngee10

Feb 10, 2011 | 2003 Toyota Corolla

1 Answer

Replacing the cv joint on 1996 toyota corolla. Where do I put the gear oil? Is there a resovoir?


cv joints do not need gaer oil, unless your gear box is low it is located in the middle the axle we they meet remove the 3/8 nut and fill it.

Jan 30, 2011 | 1996 Toyota Corolla

1 Answer

Noise around the wheels of my corolla 2007


'Clunky' noises around the front wheels especially when turning indicates worn Universal 'CV' joints: this can sometimes be minimized by greasing the CV joints. This is a common condition if the CV joints rubber covers or 'boots' are split: if you don't need to replace the CV joints yet, you will need to replace the damaged boots with what are called 'split' boots.

Hope it helps: let me know how you go!

Jan 27, 2010 | 2007 Toyota Corolla

2 Answers

Cv joints


The process is a little involved. Try going to Autozone.com and see if they have a repair guide online to look at the process.

Hope this helps...

Mike

Nov 30, 2009 | 1993 Toyota Corolla

1 Answer

Need to know how to remove cv joint for clutch replacement in 2004 toyota corolla s


Take out the drive-axle. Cut the old rubber-boot clamps off and discard them.
Remove the boot from the inner CV joint nnd slide the tripod from the joint housing.
Remove the snap-ring with a pair of snap-ring pliers.
Drive the tripod the tripod joint from the drive-axle with a brass punch and hammer; careful not to damage the bearing surfaces or splines on the shaft.


Oct 31, 2009 | 2004 Toyota Corolla

1 Answer

1992 Toyota Corolla CV Joint


You can pick up an entire re manufactured axle assembly at your local auto parts store. In order to replace the assembly you will need to disconnect the tie rod end and the ball joint. Remove the spindle nut. Push the axle stub out of the hub. Now with a suitable container under the axle to catch spilled fluid pry the axle from the transmission housing. Install is the reverse of removal. For more detailed instructions and diagrams go to www.autozone.com vehicle repair guides.

Oct 29, 2009 | 1992 Toyota Corolla

1 Answer

2004 corolla front end noise and vibration


Could be a tie rod, CV joint, wheel bearing, or even a bushing. You won't know untill you get into it.

Apr 29, 2009 | Toyota Corolla Cars & Trucks

Not finding what you are looking for?
2004 Toyota Corolla Logo

Related Topics:

284 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

75051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7726 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...