Question about Ford F-250

1 Answer

Can find the 4 wheel control module on my 2002 ford F250 Super Duty. I do not have any power going to my switch and need to check pin 4 going to the module to see if power is going to it. thanks Gene

Posted by on


1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 20 achievements.


    An expert that got 10 achievements.


    An expert that got 5 achievements.

  • Ford Expert
  • 1,868 Answers

Hello! The 4x4 module is behind the glove box...Just push the sides in and pop the rubber pegs...You are working on a common problem on all 4x4's...The lack of power to the switch is often caused by a disconnected plug on the shift motor (on the transfer case)...It's a two pin connector with wire colors Orange and Yellow...Also, the shift motor has a history of "frying"...


Posted on Aug 28, 2010


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

2 Answers

How to change a backup light switch for f250 2011 super duty transition

You need to replace the range selector switch on the side of the transmission.

Dec 27, 2016 | 2011 Ford F-250 Super Duty

1 Answer

What does the PCM due on a 2002 ford f250 super duty with v10 engine?

PCM is the Powertrain Control Module.. It controls the enigne and on some model vehicles the tranmission as well. Make sure whom ever is telling you what is bad is telling you the correct "computer" or "module" your 02 has the 7.3L in it and there is also an IDM that operates the injectors (Injector Driver Module) Newer years with the 6.0L engine have whats called a FICM instead of an IDM... Fuel Injection Control Module.

Sep 30, 2013 | 2002 Ford F250 Super Duty SuperCab

1 Answer

Replaced glow plug module because there was a burn't wire, still have the problem but no codes coming up

better check the vehicle first. and if not start ,check fuel line. must have a solid fuel line.

Oct 27, 2012 | 2002 Ford F250 Super Duty SuperCab

2 Answers

Dosent go into 4 wheel drive with the dash knob. 4 wheel works if I lock the hubs.

Your front drive axle and transfer case is controlled by the General Electronic Module (GEM) as well as by vacuum lines. The problem could be in the switches, the shift motor, the wiring, the vacuum lines, or a failure of the GEM. It would be best to scan your GEM for fault codes before any attempt at diagnosis.

Jan 12, 2011 | 2002 Ford F250 Super Duty SuperCab

1 Answer

How to remove front fender on 2002 ford f250 super duty .

take off the fender bolts and the wheel well bolts take out headlight bolts behind the headlight then it should come off

Mar 28, 2010 | 2002 Ford F250 Super Duty SuperCab

2 Answers

1999 ford f250 super duty 4x4 will go into 4

transfer case selector switch or equivlent to is bad or connectors to the switch is bad dose it do only when it rain or moisture underneath.

Jan 19, 2010 | 1999 Ford F250 Regular Cab

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

90 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts


Level 3 Expert

76673 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers


Level 3 Expert

5537 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides