Question about 2001 Jeep Grand Cherokee

1 Answer

Not current in the fuel pump and check the fuse and nothing that I review or should I look to find the error

Posted by on

  • Jeff Turcotte
    Jeff Turcotte Aug 28, 2010

    Does the car perhaps have an emergency pump shutoff (some cars have these that disable the pump in case of an accident.

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 258 Answers

Do you have spark? it's sounding like the crankshaft position sensor might be bad if it don't read it can shut down the fuel pump and sometimes the spark too. if you have the 4.0 engine the sensor is on the drvers side top of the bell housing the plug in is under the intake but the sensor is easiest to remove from underneath

Posted on Aug 28, 2010

Ad

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
motor1258
  • 6674 Answers

SOURCE: no power on fuse of fuel pump chevrolet wt 1500 4.3 liter

Can you follow orange wire back to ECM, & there may be a fusible link in that wire.

Posted on Jul 26, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why does it try to start by itself?


starter solenoid is bad replace starter. Check fuel pump circuit and fuse to ensure it's getting current to the fuel pump relay.

Feb 03, 2016 | 2006 Kia Sorento 3.5

1 Answer

Fuse for fuel pump keeps blowing


Normally fuse blows off if more current passes through it than what it is designed for.

Probably it is worth checking what original fuel pump fuse amps requirements and have the same installed.

Also check the relay if there is a relay set for the fuel pump.

Good luck

Jul 13, 2012 | 1992 Toyota Previa

2 Answers

My 2002 Expedition Doesnt have fuel pressure. Checked and the fuel pump relay is good but not being activated. Checked inertia switch and nothing. What else could it be?


the relay. Try swapping the fuel pump relay with the wiper relay. These are in the engine compartment relay box. If this doesn't help, please get back to me.

Dec 18, 2010 | Ford Expedition Cars & Trucks

1 Answer

Is there a fuel reset button for the fuel pump on my 1992 Nissan Maxima? If so where is located.


There is no fuel pump reset button on the 1992 Maxima. Check your fuel pump fuse under the dash. If it's not blown, check for current at the fuel pump connections. If you have current at the pump, then you probably have a bad fuel pump.

Sep 22, 2010 | 1992 Nissan Maxima

1 Answer

I'm not getting gas to the engine. The fuel pump is not getting current. New fuel pump relay. There is good spark at the plugs.


I would check to see if the inertia switch has been tripped. Also check the fuse pump fuse. Are you getting current to the fuel pump relay?

Jun 09, 2010 | 1993 Mercury Sable

1 Answer

Fuel pump won't come on when ignition isturned on


most fuel pumps fuses and relays are under hood,,you my have blown relay

Aug 11, 2009 | Ford E-350 Cars & Trucks

2 Answers

No power on fuse of fuel pump chevrolet wt 1500 4.3 liter


it sounds like the fuel pump relay is bad. it should be located in the under hood fuse panel

Jul 25, 2009 | Chevrolet Silverado 1500 Cars & Trucks

1 Answer

1988 ford truck f-150 xlt lariat cant get current to fuel pump


Have you checked the 'inertia switch' which in the event of an accident shuts off the fuel supply to prevent a fire . It's usually located in the cab on pass. side. Some models have one reset button, some 2 which have to be pressed at the same time. If that's not it, here's how the power to the pump SHOULD work, you will have to follow the path to see where it stops. When you turn the key on it turns on the EEC power relay on, this relay then provides power to the PCM (power control module) and the control side of the fuel pump relay. Power for the fuel pump is supplied through a fuse link or high current fuse attached to the starter solenoid (battery side). From the fuse link or high current fuse current flows thru the fuel pump relay and inertia switch to the fuel pump. The fuel pump relay is controlled by the PCM. When the ignition switch is turned on the fuel pump will operate, if the switch is NOT turned to start position, the PCM will shut off the fuel pump off after 1 second. This is to avoid flooding the engine when it is not running, just key on. So check out to see if you have a fuse link or a high current fuse and if they are blown.

Apr 14, 2009 | 1998 Ford F150 Regular Cab

1 Answer

Electrical problem


two things one there should be a fuel pump fuse under the cover on the right firewall check that,two there is a ground on the frame left rear by the tail light harness it will shut down the fuel pump

Sep 08, 2008 | 1991 Chevrolet Silverado 2500

Not finding what you are looking for?
2001 Jeep Grand Cherokee Logo

Related Topics:

45 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

76132 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...