Question about 1999 Daewoo Leganza

1 Answer


Posted by on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert whose answer got voted for 500 times.

  • Master
  • 2,702 Answers

Im sorry to say that the plastic connection can not be glued
its a polycarbon (bet i spelt that wrong) and no glue will stick it
so you need a new part now,,,the thermostat is were the top hose fits on the engine,,(thats the big hose from the top of the rad)

Posted on Aug 27, 2010


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

2 Answers

Small drips of coolant underneath radiator it seems but not overheating not sure what to check idk if its the radiator, a hose or maybe water pump.

You need to find the source of the leak, Follow the coolant residue to the leak. It can be tricky to find with all the plastic covers on vehicles now, You may have to remove to some covers to see the leak.

Apr 02, 2015 | Cars & Trucks

1 Answer

Coolant Reservior Hose

The second hose is the actual overflow hose where coolant escapes should the tank become full.

Jan 21, 2014 | 1997 GMC Sonoma

1 Answer

I have bought a multiple owner 1974 Ford Ranchero which has been monkeyed with. The heater core is disconnected, as in connection tubes have no hoses to them. the engine runs nice but seems to always

replace your radiator cap.. may be the spring of radiator cup is not return or cant hold hot degree temperature that is why the water back to plastic tank

Mar 17, 2013 | Cars & Trucks

2 Answers

I have a 98 lincoln town car executive and I need to know how you change the thermostat

1. drain coolant
2. remove engine cover
3. remove the 2 bolts from water hose connection (upper rad hose connecting to)
4. remove o-ring and thermostat
5. repeat in reverse order

Feb 05, 2010 | 1998 Lincoln Continental

1 Answer

2001 Kia Rio Cooling is leaking from hose near to the radiator cap.

The small[pencil size] hose connected just below the radiator cap & to the plastic coolant reservior is the coolant over-flow hose,allowing the coolant to flow into the tank as it expands from being heated,and return to the system as it cools.If the leak is near the radiator fitting,possibly damaged portion can be cut off while engine is cool,and hose re-fitted.Replacement tubing is available at auto parts supply stores,identifiyed by it's inside diameter measurement.

Oct 21, 2009 | 2001 Kia Rio

1 Answer

Water leak ford focus

if that pipe is neceseria can not eliminate

Aug 11, 2009 | 2002 Ford SVT Focus

1 Answer

Monster fuel leak

if the gas is leaking from the top of the tank, 10 to 1 it's either the fuel line, or the top part of the sending unit which is probably made of plastic, is cracked where the fuel line connects to.The tank should be empty or near it, easier to drop, loosen the tank strap bolts towards the front, then remove the rear ones one at a time, as you take the last rear bolt out, the tank should drop a little. Becarful of the wire connection and fuel line, drop it slowly enough to reach in and disconnect them.If the unit has a plastic hose connection, it needs replacing. good luck.

Jan 22, 2009 | 1998 Subaru Forester

2 Answers

Gas tank leak

Always ground yourself to the vehicle's chassis to prevent sparks while working on or around the fuel tank.
  1. Disconnect the negative battery cable.
  2. Remove the access panel under the rear seat or in the luggage compartment.
  3. Disconnect the gauge sending unit wiring and hoses.
  4. Raise and safely support the vehicle.
  5. Drain the fuel tank into an approved container.
  6. On Cabriolet models, remove the right rear inner fender and disconnect the breather hose from the filler. Remove, but do not disconnect the gravity valve.
  7. Detach the fuel pump bracket from the body.
  8. Lower the pump enough to disconnect the fuel hoses from the tank.
  9. On Cabriolet models, the rear axle must be dropped out of the way as follows:
    1. Disconnect the brake hydraulic hoses at both sides of the rear axle.
    2. Detach the rear axle from the body on both sides and let it hang on the parking brake cables.
  10. Unhook the muffler supports and pull the large hose from the filler neck.
  11. Support the tank, loosen the straps and carefully lower the tank out of the vehicle.
To install:
  1. If a new tank is being installed, glue new foam strips to the tank in the same location as the old ones.
  2. Position the tank and secure it with the straps.
  3. Connect the wiring and hoses to the sending unit.
  4. Attach the fuel pump bracket to the body.
  5. On Cabriolet models, install the rear axle, connect the hydraulic lines and bleed the brakes.
  6. Install the access panel once all electrical connections have been made.
  7. Connect the negative battery cable.
  8. Fill the tank with fuel and check for leaks.

Sep 08, 2008 | 1997 Volkswagen Golf

Not finding what you are looking for?
1999 Daewoo Leganza Logo

Related Topics:

32 people viewed this question

Ask a Question

Usually answered in minutes!

Top Daewoo Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers


Level 3 Expert

76164 Answers

Steve Hurc
Steve Hurc

Level 3 Expert

450 Answers

Are you a Daewoo Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides