Question about 2007 Hyundai Santa Fe Limited

1 Answer

Where is the oil filter 2007 santa fe v6 not under plastic cover

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,478 Answers

Hello,

It is located on the top of you engine compartment, under the hood, to the right (Driver Side) of the engine and left of your battery. You need to take off the plastic engine cover (two bolts and four screw nuts) to expose it. It is cylinder in shape with a black plastic cap, which screws off to show the oil filter. The filter is different than your normal one, it doesn't have a outside metal cover to it. It looks like a air filter but round. Also in the box with your new oil filter comes two "O" rings, one small and one big. The big one replaces the "O" ring at the top of the screw part of your black cap and the small one goes on the bottom of the same cap.

Take care.

Posted on Aug 27, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is the blower motor on a 2007 santa fe located in my car


should be under the dash most likely on the passenger side of vehicle or more to that side. you'll have to take a plastic cover off to get visual of blower motor.

Sep 27, 2014 | 2007 Hyundai Santa Fe

1 Answer

All I want to know is where to find the oil filter in a 2010 Santa Fe. Does anyone know where I can find this info for free?


3.5 L 24 valve engine:

Take the plastic cover off the top of the motor. The oil filter housing should be on the driver side of the motor in between the heads. It is a cartridge style and it may be a dealer only part.

May 09, 2011 | 2010 Hyundai Santa Fe

1 Answer

I'm looking for the oil filter on the 2002 Santa fe V6


check for a round cylinder under engine that could be silver, white, orange, black, or blue.

Mar 19, 2010 | 2002 Hyundai Santa Fe

1 Answer

Where is the oil filter on the 2003 Hyundai Santa Fe?


Hello there
There is a large plastic protective cover on the underside of the front of the engine which covers the bottom of the engine from side to side. On the passenger side close to the front of the vehicle there is a rectangular access port (about 6" x 8") built into this plastic cover. The access port has a cover which is removed using two screws that are right beside each other. The port cover slips out after these screws are removed and the oil filter is visible as soon as the panel cover is off.
I hoe that you find this very helpfull
best regards michael

Sep 13, 2009 | 2003 Hyundai Santa Fe

1 Answer

Need helpful suggestions on changing the oil on 01 santa fe


i do my own oil since ive had my 02 santa fe.first remove the black plastic shield under the car.its best to use the perfect size rench to break the oil pan bolt lose. it takes 4.5 quarts for the four cylinder and the v6 3.5L 4.7quarts for 2.7Lv6

Aug 10, 2009 | 2001 Hyundai Santa Fe

2 Answers

HOW TO CHANGE OIL ON A 2002 HYUNDAI SANTA FE. IM 19 YRS OLD AND WOULD LIKE TO HELP MY GIRLFRIEND AND CHANGE IT FOR HER. A DETAILED DRAWING POINTING OUT THE OIL CAP AND THE DRAINAGE AND FILTER FROM...


Lift your Hyundai Santa Fe using a jack and then place the car on jack stands. If you don't have jack stands, drive the car onto a set of wheel ramps.
Pop the hood and remove the dipstick and oil filler cap. The dipstick is near the front engine compartment with the oil filler nearby.
Gather an oil drip pan, a 17-mm wrench, oil filter wrench, cleaning cloths and a new oil filter. Slide under your Santa Fe.

Change the Oil
  • Locate the oil filter and oil drain plug underneath the car. The drain plug is on the bottom of the oil pan, and the filter is to the side of the oil pan.
  • Remove the oil drain plug using the 17mm wrench. Pull the plug out quickly and let the oil drain for 10 to 15 minutes. Check the gaskets and threads for damage. Replace these components, if necessary.
  • Take off the oil filter using an oil filter wrench. Dump the old oil into the oil drip pan and put on the new oil filter. Tighten the oil filter by hand, and then replace the oil drain plug using the wrench. Clean off the excess oil.
  • Go under the hood and add oil. Turn on the engine and check the oil pressure gauge to make sure it rises. Let your Santa Fe run for a minute.
  • Lower your Hyundai Santa Fe and turn off the engine. Take an oil reading on the dipstick. If the oil level isn't at full, add a bit more oil.
Thanks
Kinldy rate the answer
Smith

Jul 08, 2009 | 2002 Hyundai Santa Fe

1 Answer

Location of oil filter on 2008 Santa Fe Limited


if it is a 3.3L it is a canister filter on top of the engine, the cover will need to be removed. make sure to change the o-rings. if it is a 2.7L, on bottom of engine near front of engine.

Apr 30, 2009 | 2007 Hyundai Santa Fe Limited

1 Answer

2007 Hyundai Santa Fe - Replacing fog light


hi have not had pleasure of this on santa fe yet? but will try to help dependant of which side o/s or n/s ? i would first remove the screws holding the front of the under engine plastic cover/shield and drop down sufficient to gain view/access? to the rear of fog lamp then if a cover is on? try turning anti clock to remove? or if rubber cover pull off? then the bulb and clip should be visible? unplug the wire from bulb then the spring clip holding bulb in place normally just sring the 2x top ends together and swing down/clear to remove bulb? refit new bulb correctly! pay attention to position old bulb positioned? then clip securely and re connect wire at this stage it would be best to ensure bulb works ?? before you re assemble all else? wish you luck and hope this helps with your problem ?

Oct 28, 2008 | 2007 Hyundai Santa Fe Limited

1 Answer

2007 Hyundai Santa Fe AC Fiter


Fuel pump (INCLUDING FUEL FILTER AND FUEL PRESSURE REGULATOR) item No2 on next Fig.
dd110b4.gif G 3.3 V6 DOHC and G 2.7 Vs DOHC Fuel System
b2ee82a.gif

Jun 24, 2008 | 2007 Hyundai Santa Fe Limited

Not finding what you are looking for?
2007 Hyundai Santa Fe Limited Logo

Related Topics:

92 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8499 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...