Question about 2004 Jaguar XJR-Series

1 Answer

DO I NEED TO REPLACE MY CHROME MOULDINGS ON MY 2004 JAGUAR XJR WHEN I CHANGE THE WINDSHIELD

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 4,102 Answers

Hi, the answer to your question is it all depends if you can get them off without breaking them, it can be done but not very often it might be worth just buying them just in case then if you dont use them you can always take them back and get your money back.

most of the time you will get a crease in one or it will split but if you take you time you may get it off in one piece, their is no right or wrong way and no tricks to getting it off in one piece, its just the luck of the drawer, take your time and work your way around it and dont use to much force on one part. the chances are it will split or crease so dont think it because you have done something wrong its just they are made to stay where they are so getting them off in one piece is difficult at the best of times.

so to answer your question, i would say get them just in case as it saves you going back to get them if you do end up damaging it, you can always take it back if you dont need to use the new parts.

let me know if you need further assistance ok

please rate this solution as i have a whole page of unrated posts, thanks

Posted on Aug 27, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to open the trunk on 2004 Jaguar XJR. The battery is dead.


Hi Manuel:
Is it possible to open the hood?
If so, you should be able to attach jumper cables (Alternator or Relay?) to get the switches powered up. I'm assuming the trunk latch is electrical.

Jan 05, 2016 | 2004 Jaguar XJR-Series

1 Answer

How do i stop the wiper blades in the middle of the screen jaguar xj


On the WEB:

Front Wiper Blade Change Jaguar XJ8 (2004-2009) - 2008 ...

www.carcarekiosk.com/...Jaguar.../windshield_wiper_blade.../replace_wi...
Free video on how to replace the front windshield wiper blades in a 2008 Jaguar XJ8 L 4.2L V8. Complete instructions for changing the front wiper windshield ...

Jul 25, 2015 | Jaguar Cars & Trucks

1 Answer

2004 XJR brake lights coming on intermittently when not braking and It's showing excessive wear on rear rotors


For some cars when the brake light comes on it means that the brake fluid is in the reservoir is low. Check and refill.

Nov 16, 2012 | 2004 Jaguar XJR-Series

1 Answer

Steering is very stiff in my 2004 jaguar xjr


You may have a fluid leak. The pipes are prone to leaking on that vehicle. The power steering top up reservoir is under the hood. Refer to reservoir caps for indication or owners manual.

Nov 04, 2012 | 2004 Jaguar XJR-Series

1 Answer

2001 jaguar xjr main bearing and rod torque


Replace the damaged spares with the original and get this done at the authourised centre.

Sep 28, 2010 | 2004 Jaguar XJR-Series

1 Answer

The windshield wiper fuse is blown.


use the old grey matter and pull them out one by one

Apr 02, 2009 | 2004 Jaguar XJR-Series

1 Answer

Change light bulbs on a 2004 xj8


under your bonnet you will see the back of the head light slide off the rubber boot and there will be a clip holding the glob in place

Dec 28, 2008 | 2004 Jaguar XJR-Series

1 Answer

2004 jaguar xjr series


look all the way to the back of that toward the rear of the motor... you should have some access to the drain plug... if there is no access you need to purchase the socket that will fit that... likely a torq type.

Robert

Sep 02, 2008 | 2004 Jaguar XJR-Series

1 Answer

Jaguar xjr 2004


the motor is "sealed" by the factory... you need a special tool.... it does beg the question. it sounds like you are trying to remove the whole oil pan. why ??

There should be a drain plug that you can unscrew to change the oil.

Robert

Sep 02, 2008 | 2004 Jaguar XJR-Series

Not finding what you are looking for?
2004 Jaguar XJR-Series Logo

Related Topics:

37 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jaguar Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

yadayada
yadayada

Level 3 Expert

75822 Answers

SPEEDY CAR WORK SHOP...

Level 2 Expert

489 Answers

Are you a Jaguar Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...