Question about 2000 Hyundai Accent

1 Answer

Drivers air bag cover coming loose on rigth side of steering wheel how can i fix ya thanks paul

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 209 Answers

There is a small hole on the under side of the steering wheel at both side that requires a small allen key to be inserted to an allen bolt

Posted on Aug 27, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Buttons for cruise, info and cruise set stopped working. (left side of steering wheel. Can't get the cover off to check. Help. Was told the wires come loose and have to be soldered back.


Is the air bag symbol lit on the instrument cluster ? If so your problem is with the clock spring inside the steering column . I suggest you take this to a ASE certified repair shop or the dealer > If you don't know about disabling the air bag system before messing with the cruise control buttons .You can accidentally deploy the air bag in the steering wheel ,an people have been killed messing with what they don't know about . I been fixing vehicles for over thirty years ,an I work for Chevy . I have not seen wires come loose .Those buttons receive voltage from the BCM - body control module , when you use those buttons they input to same BCM . Myself I would hook up tech 2 scan tool an check for those inputs to the BCM .

Dec 28, 2015 | 2008 Chevrolet Malibu LS

1 Answer

1989 jeep cherokee loose steering wheel


danger big time, get that fixed now.
or DIY,
defeat air bags (FSM steps ) (if you have em.)
remover cover from center of steering, (air bag, rules)
and tighten that big nut there to factory spec. torque.

Mar 11, 2014 | Jeep Cherokee Cars & Trucks

1 Answer

Kia spectra steering wheel


it will have an air bag i take it feel behind the steering wheel you will feel two holes these holes are the way you take off the air bag depending on weather it has a star drive screw or a normal posey screw put the driver into these holes take out screw (some screws dont come out all the way but you can tell if there loose ) air bag should come off remember to take off battery lead and let it power down for a few minuets before yo u remove the air bag if not the air bag ecu will thing there is a faault and you will have to get it reset the nut for the steering wheel will be there losen it and remove wheel hope this helps ivan

Oct 02, 2012 | 2007 Kia Spectra LX Sedan

1 Answer

How do i take the the steering wheel off 99 silverado 2500


Be sure to deactivate the air bag before working on the steering wheel. I just disconnect both battery connections and let it set 15 minutes. Insert a flat tip screwdriver into each slot on the back of the steering wheel and twist slightly to release air bag retaining clips.Don't do this while sitting in the drivers seat, the bag might go off! Pull the bag off, release the small assurance clip then the connector will pull out of the air bag. Set it in the bed, bag side up so the cover can't become a projectile if it goes off. Pull the horn connector out of the steering wheel. Back the large bolt out most of the way on the steering wheel puller . Bolt the puller to the wheel with 2 bolts and screw the large bolt back into the puller. I tap on the wheel as I screw it in.

Read more: http://wiki.answers.com/Q/How_do_you_remove_the_steering_wheel_on_a_1999_silverado#ixzz23kyUrQD2

Aug 16, 2012 | 1999 Chevrolet Silverado 1500

1 Answer

2002 Ford Windstar - airbag code 22, safing sensor - what does that mean and how is it fixed?


Hello! The Air Bag Sliding Contact (ABSC) is more than likely faulty...See diagrams below....The removal of the ABSC is involved, I would suggest buying a repair manual before attempting repair...
Guru.....Saailer


saailer_105.gif


Item Part Number Description
1 043B13 Driver Side Air Bag Module
2 N804385-S100 Screw
3 N606676-S36 Screw
4 3L518 Steering Wheel Spoke Cover
5 14A664 Air Bag Sliding Contact
6 3600 Steering Wheel
A - Tighten to 36-46 Nm (25-34 Lb-Ft)
B - Tighten to 2-3 Nm (18-27 Lb-In)


saailer_106.gif

Aug 30, 2011 | Ford Windstar Cars & Trucks

2 Answers

Steering wheel adjustment , the steering whell is 90degrees off but the car does not pull eather direction. car was stolen no damage just steering whell truned


jack front of car up then turn steering wheel full lock to full lock and count the number of turns from either side then divide by 2 so you have the straight ahead position then remove the steering wheel and replace in the straight ahead position ,iam saying this because the vehicle may have been re tracked and only one track rod end adjusted so you have say 2 turns to the left and 2 and half to the right if you follow me .or remove the steering wheel then just hold it on and slowly drive forewards and lift wheel and refit to the correct position

Feb 10, 2011 | 1999 Mercury Grand Marquis

1 Answer

Need to remove heater A/C dash control , what is proper procedure?


Look at fig. 4 for the heater a/c dash control: HEATER CORE Altima REMOVAL AND INSTALLATION
  1. Position the steering wheel in the straight-ahead position.
  2. Turn the ignition switch OFF.
  3. Disconnect the negative (() battery cable; then, the positive (+) battery cable. NOTE: Wait for a least 3 minutes after disconnecting the battery cables for the charge in the air bag circuit to dissipate before working on the air bag module(s).
  4. Remove the driver's side SRS and steering wheel by removing or disconnecting the following:
    • Lower lid from the steering wheel and disconnect the driver's air bag module connector
    • Left and right side lids from the steering wheel
    • Special bolts from both side of the steering wheel using a tamper resistant Torx wrench (T50)
    • Air bag module and store it face up
    • Horn's electrical connector and remove the steering wheel nut
    • Steering wheel from the steering column using a suitable puller
  5. Remove the passenger's side SRS by removing or disconnecting the following:
    • Glove box door and the glove box
    • Front passenger's air bag module connector
    • 2 special bolts using a tamper resistant Torx wrench (T50)
    • 4 passenger's air bag-to-instrument panel nuts
    • Front passenger's air bag module and store it face up.
  6. Drain the cooling system into a clean container for reuse.
  7. Discharge and recover the air conditioning system refrigerant.
  8. Working in the engine compartment, disconnect the heater hoses from the heater core tubes.
  9. Remove the instrument panel by removing or disconnecting the following:
    • Kick plate and dash side finisher on the driver's side
    • 2 lower panel-to-instrument panel screws and the lower panel on the driver's side
    • 2 lower reinforcement panel-to-instrument panel screws and the lower reinforcement panel
    • 6 steering column cover screws, the covers, the spiral cable and combination switch
    • 2 cluster lid "A" screws and the cluster lid "A"
    • 3 combination meter screws, disconnect the electrical harness connector and remove the combination meter
    • Switch panel
    • Instrument panel lower covers
    • Snap out the transmission shifter finisher (boot)
    • 4 cluster lid "C" screws and the cluster lid "C"
    • 4 audio and deck pocket-to-instrument panel screws and the audio and deck pocket
    • 5 center console screws and the center console
    • 2 center instrument panel screws and the center panel
    • front defroster grilles
    • Front pillar garnish
    • Instrument panel 3 nuts/4 screws and the instrument panel
    • 8 instrument stay assembly nuts and the stay
    • Steering member assembly 5 nuts/1 bolt and the steering member
  10. Remove the air conditioning housing assembly by removing or disconnecting the following:
    • Refrigerant lines from the air conditioning housing assembly
    • Thermo control amp
    • Air conditioning housing assembly
  11. Remove or disconnect the following:
    • Heater unit
    • Heater core from the heater unit Fig. 1: Exploded view of the steering wheel and air bag module 93112gd9.gif
      Fig. 2: Exploded view of the passenger's side air bag module 93112gd0.gif
      Fig. 3: Exploded view of the instrument panel assembly 93112ge1.gif
      Fig. 4: Exploded view of the heater housing assembly and related components 93112ge2.gif
      Fig. 5: View of the heater core and heater housing 93112ge3.gif
    To install:
  12. Install or connect the following:
    • Heater core to the heater unit
    • Heater unit
  13. Install the air conditioning housing assembly by installing or connecting the following:
    • Air conditioning housing assembly
    • Thermo control amp
    • Refrigerant lines to the air conditioning housing assembly
  14. Install the instrument panel by installing or connecting the following:
    • Steering member assembly and the steering member 5 nuts/1 bolt
    • Instrument stay assembly and the 8 stay nuts
    • Instrument panel and the instrument panel 3 nuts/4 screws
    • Front pillar garnish
    • Front defroster grilles
    • Center instrument panel and the 2 center panel screws
    • Center console and the 5 center console screws
    • Audio and deck pocket and the 4 audio and deck pocket-to-instrument panel screws
    • Cluster lid "C" and the 4 cluster lid "C" screws
    • Snap in the transmission shifter finisher (boot)
    • Instrument panel lower covers
    • Switch panel
    • Combination meter, connect the electrical harness connector and install the 3 combination meter screws
    • Cluster lid "A" and the 2 cluster lid "A" screw
    • Combination switch, the spiral cable, the covers and the 6 steering column cover screws
    • Lower reinforcement panel and the 2 lower reinforcement panel-to-instrument panel screws
    • Lower panel and the 2 lower panel-to-instrument panel screws, on the driver's side
    • Kick plate and dash side finisher, on the driver's side
  15. Working in the engine compartment, connect the heater hoses to the heater core tubes.
  16. Install the passenger's side SRS by installing or connecting the following:
    • Front passenger's air bag module
    • 4 passenger's air bag-to-instrument panel nuts
    • 2 new special bolts and torque using a tamper resistant Torx wrench (T50) to 11-18 ft. lbs. (15-25 Nm)
    • Front passenger's air bag module connector
    • Glove box door and the glove box
  17. Install the driver's side SRS and steering wheel by installing or connecting the following:
    • Steering wheel to the steering column
    • Steering wheel nut and torque the nut to 22-29 ft. lbs.
    • Horn's electrical connector
    • Air bag module
    • New special bolts to both sides of the steering wheel and torque the bolts using a tamper resistant Torx wrench (T50) to 11-18 ft. lbs. (15-25 Nm).
    • Both the left and right side lids to the steering wheel
    • Lower lid to the steering wheel and connect the driver's air bag module connector
  18. Refill the cooling system.
  19. Connect the positive (+) battery cable; then, the negative (() battery cable.
  20. Evacuate, charge and leak test the air conditioning system refrigerant.
  21. Operate the engine to normal operating temperatures; then, check the climate control operation and check for leaks.

Nov 19, 2010 | 2002 Nissan Sentra

2 Answers

How do I remove the steeringwheel from a 1997 toyota tacoma v-6 4x4


you must removwe the airbag first. disconnect the battery for at least 10 minutes before you start. on th sidecover of the steering wheel you will find two covers that you must remove. underneath these covers you will find two # 30 torx screws. loosen these screws. they will not come all the way out. once they are removed lift out the airbag. carefully disconnect the airbag wiring. there is a 17mm nut holding the steering wheel on , remove it. at this point you can try to wiggle the wheel off but you will probably need a steering wheel puller. you would be much better off letting a professional handle this.

Oct 01, 2009 | 1997 Toyota Tacoma

1 Answer

Airbag deployed


SECTION 501-20B: Occupant Restraints — Passive — Supplemental Air Bag System 2000 Villager Workshop Manual REMOVAL AND INSTALLATION Module —Driver Air Bag Removal
syv~us~en~file=ani_caut.gif~gen~ref.gif WARNING: The backup power supply energy must be depleted before any air bag component service is performed. To deplete the backup power supply energy, disconnect the battery ground cable and wait three minutes.
NOTE: Repair is made by installing a new part only. If the new part does not correct the condition, install the original part and perform the diagnostic procedure again. If the vehicle was in a frontal collision and the air bag did not deploy, the air bag may not have been needed. Complete a diagnosis of the air bag system before installing a new driver side air bag module (043B13). Refer to Diagnosis and Testing in this section.
  1. Disconnect the battery ground cable (14301). For additional information, refer to Section 414-01 .
  1. Remove the two driver air bag module retaining bolt access covers (one shown).
  1. Remove the steering wheel bottom cover to access the driver air bag module electrical connector.
  1. Disconnect the driver air bag module electrical connector.
  1. syv~us~en~file=ani_caut.gif~gen~ref.gif CAUTION: After removing, discard the driver side air bag module bolts and install new driver air bag module bolts during installation.
    Remove the two driver air bag module retaining bolts (one shown) and discard.
  1. Remove the driver air bag module.
    1. Separate the driver air bag module from the steering wheel and disconnect the horn pad switch.
    1. Remove the driver air bag module.

Apr 16, 2009 | 2000 Nissan Quest

Not finding what you are looking for?
2000 Hyundai Accent Logo

Related Topics:

61 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8140 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...