Question about 1995 Volvo 940

1 Answer

I have a Volvo 940 from 1991, 2,3 liter injection engine. One day was not possible to start. The garage changed the Jetronic computer from Bosch. They say that the fuel pomp was stopped by the Jetronic box. First they say that the alarm burn some connexion in the box. They tested the fuel pomp directly and was ok. After changing the Jetronic box the car started but the Lambda board lamp remained open and they say now is a fuel injection problem but they have to do a research and is very costly. In fact they seam in the limbo of an open choice of problems. Their first reaction was to advice me to scrap the car. I am in Belgium not in a difficult country for those cars. Thank you for your help. Juan

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Volvo Master
  • 22,246 Answers

Go to scrapyard and take all the parts you think could be wrong and change them

Posted on Aug 27, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Does a 1988 mercedes benz 560 SEL have fuel injection?


Yes. It uses a bosch CIS-E injection system. More information about the system can be found here - http://en.wikipedia.org/wiki/Jetronic

Mar 01, 2015 | 1988 Mercedes-Benz S-Class

1 Answer

Volvo v70,had to replace d5 engine and now will only start by spraying with diesel


without my head under the bonnet here iam at a loss as its about this time that common rail was introduced so i could write two seperate and completely different answers ,check the temperature sensors thik their is two of them for the engine gauge and the fan ,also the heater timer/relay as either way i think its not injecting enough fuel when cold ,also it may pay to fit a non return valve in the inlet line to stop the fuel from running back when stopped ,yes i know its a bodge answer but if a fuel pump its 600 euros to change the valve in the pump .but agn i would need to know what type of injection system is used

Apr 25, 2012 | Volvo V70 Cars & Trucks

1 Answer

What is the spec for fuel pressure


1989 Mercedes-Benz 300-Class, W124 chassis type

Fuel system (make and type): Bosch KE-Jetronic
Injection pressure / system pressure = 5,3 ... 5,5 bar (76,9 ... 79,8 psi)

Oct 13, 2011 | 1989 Mercedes-Benz 300-Class

1 Answer

Just bought the 1988 Toyota pickup and don't know what size engine in it. I need to change the oil and need to know what type.


If it's a 4 cylinder it's a 2.4 liter. If it's a 6 cylinder it's a 3.0 liter. The 2.4 liter engine comes with a carb, Fuel injection or even a turbo. Either way the 2.4 and the 3.0 take the same oil filter. The bosch is # 3330. I hope this helped and good luck.

Feb 09, 2011 | 1988 Toyota Pickup

1 Answer

Code 221--- is this usually oxeygen sensor


If it is a Bosch LH 3.2 Jetronic System 221 =long term fuel mixture too weak in part load stage
If it is a Fenix 5.2 System 221=Lambda Operation; also Heated oxygen sensor (mixture too rich under part throttle)
/ long term fuel mixture too weak in part load stage

So yes

Mar 25, 2010 | Volvo 940 Cars & Trucks

1 Answer

1983 volvo 244 no start good fuel pressure and verified spark


the relays are under the glovebox or in that general area

Mar 09, 2010 | 1984 Volvo 240 Series

2 Answers

Does 1990 Oldsmobile Regency have a ccold start injector?


no this engine doesn't use a cold start injector, only early fuel injection systems (Bosch K jetronic) used this part, this is a "L" jetronic system.

Mar 03, 2010 | 1990 Oldsmobile Regency

1 Answer

Difficulty in cold starting golf MKII 1988


If it is the EFi model (electronic fuel injection) then change the coolant temp sensor

If it is the slightly earlier Bosch K-Jetronic mechanical injection it could be either the warm up valve or the 5th injector (Blue coloured part on the end of the fuel rail)

Regards

Lloyd

Dec 28, 2009 | 1988 Volkswagen Golf

1 Answer

95 volvo 940 jetronic error codes 113 212 232


Change the the O2 senor on the catalytic convert. Its probably dead.

Jan 15, 2009 | 1995 Volvo 940

1 Answer

Hard to start when engine is cold


The thing you need to do is run a leak down test on the fuel pump overnight, hook up a fuel pump test guage to the fuel injector gas rail test port, run the engine, note the fuel pressure when you shut the engine off, it should not drop more than 5 PSI overnight, if it does you need a new fuel pump. Your car doesn't use a cold start valve, that was used on very early Bosch K-Jetronic fuel injection systems, they where last used in the 80's

Oct 28, 2008 | 1990 Mitsubishi Galant

Not finding what you are looking for?
1995 Volvo 940 Logo

Related Topics:

289 people viewed this question

Ask a Question

Usually answered in minutes!

Top Volvo Experts

yadayada
yadayada

Level 3 Expert

76848 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Volvo Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...