Question about 1990 Volvo 240
E mail me @ email@example.com sat am and i will look in the next doors garage(he has 2 sat in there.a 244dl 4spd and a 245 2.3 gl.manua5spd.)need email to remind me......getting old .....
Posted on Aug 27, 2010
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
Oct 16, 2015 | 2004 Oldsmobile Alero
Mar 21, 2015 | 1999 Pontiac Bonneville
can be faulty wiper motor or blown wiper control fuse.
you hear any kind of noise when you starter the wiper function. If yes then
fuse is ok, but issue is wiper motor.
no movement at all and no noise then its blown fuse or shorted/loose wiper
control wiring: -----
complete troubleshooting i suggest you few helpful links with accurate
the link below: -------
1993 Ford F350 wipers not working?
How to Replace a Windshield Wiper Motor
Wipers not working, but hear relay click on Lincoln LS?
Car windshield wiper gets power for movement and stops?
How does cars Windshield Wiper System Works
1997 Honda Protege: Replace Wiper Transmission?
Windshield wiper fluid container leaking?
Where is wiper fuse located on1993 chevrolet suburban
2002 Toyota Sienna: Wipers and Passenger side Power window
Complete wiper components replacing details for Acura Car
These details will help.
Nov 29, 2012 | 2003 Chevrolet Cavalier
The wiper motor on a Volkswagen is located directly underneath the plastic cowl cover. The cowl cover is located directly below the windshield.
Begin by removing the wiper arms by prying off the covers at the base of the arms and removing the nuts that secure the arms to the drive shafts. Label the passenger and driver arms so they can be installed in the same positions. They are not interchangeable. Remove the rubber hood to cowl weather seal. Unscrew the plastic fasteners from the driver's side of the cowl cover, then remove this half of the cover. Remove the fasteners from the passenger's side cowl cover and remove this half of the cover. Disconnect the windshield wiper motor wiring harness by separating the plastic wiring connector. Remove the three bolts that secure the wiper motor to the vehicle's body. Pull the motor slightly away from the body, then remove the nut that connects the motor shaft to wiper linkage. Remove the motor.
Place the new wiper motor into position in the cowl and reconnect it to the wiper arm linkage. Then reinstall the three retaining bolts. Reconnect the plastic wiring connector to the wiper motor wiring harness. Place the cowl covers into position below the windshield and reinstall the plastic fasteners that retain them. Reinstall the rubber hood to the cowl weather seal. Reinstall the wiper arms in the same position you removed them from, along with the wiper arm retaining nuts and lower wiper arm covers. Turn the windshield wipers on and test for proper operation. If the wiper blades slap against the bodywork surrounding the windshield, loosen the nuts that connect the wiper arms to the shafts and adjust.
Aug 06, 2012 | 1994 Volkswagen Golf
Feb 02, 2011 | 2006 Chevrolet Trailblazer
Oct 27, 2010 | 2001 Pontiac Firebird
Nov 07, 2009 | Oldsmobile Alero Cars & Trucks
May 01, 2009 | 1999 Lincoln Town Car
Jun 23, 2008 | 1998 Mercury Villager
Jan 01, 2014 | 1990 Volvo 240
89 people viewed this question
Usually answered in minutes!