Question about 2005 Hyundai Santa Fe

1 Answer

How are the cross rails on the roof rack adjusted on a 2005 santa fe

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

YOU SHOULD HAVE A LITTLE BLACK OVAL RECESSED CENTER. THIS GOES OVER THE S LOOKING SYMBOL IN THE UPPER PART OF THE CROSS ARM PUT THE KEY IN THE SLOT AND TURN 1/4 TURN. YOU HAVE TO PUT PRESSURE ON THE KEY AS YOU TURN. NOW LIFT UP ON THE RELEASE AND PUSH DOWN ON THE PART BELOW THE RAIL AT THE SAME TIME. AFTER YOU MOVE THE CROSS PCS. TO ITS LOCATION LIFT UP ON THE BOTTOM AND PUSH DOWN ON THE TOP. DONT TRY IT WITH THE LITTLE KEY.

Posted on Aug 30, 2010

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 4793 Answers

SOURCE: How do I adjust the cross rails on my 2005 Santa

one person either side, lift up the tabs at each end and slide back/forward.

Posted on May 22, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I install the cross rails on a 2008 suburban roof rack


but that's all you need to do is remove the end piece on both sides and slide the cross rails in and replace the ends

T-15 is the size...Its a good idea to check them regularly if you use the rack regularly...>
Cross rails retaining screws

Mar 07, 2015 | 2008 Chevrolet Suburban

1 Answer

We purchased a set of universal cross bars for our Hyundai Santa Fe roof rack off Amazon.com. However, there were no installation instructions included. Any ideas?


Contact Amazon.com or the product manufacturer for assistance. The manufacturer may have a website where you can download the instructions.

Sep 02, 2011 | 2004 Hyundai Santa Fe

1 Answer

How do I adjust the cross rails on my 2005 Santa


one person either side, lift up the tabs at each end and slide back/forward.

May 22, 2010 | 2005 Hyundai Santa Fe

1 Answer

Can't secure the front cross rail forward for bike rack


dear friend-the roof rack on a sante fe can not be moved.should you attempt that you will have constant rattles on your roof.i can surgest.that you modify your bike rack.

Jul 19, 2009 | 2007 Hyundai Santa Fe Limited

1 Answer

How to adjust the crossbars for factory roof rack


dear friend-as your roof rack is a factory fitted unit it has no adjustment

Jul 18, 2009 | 2007 Hyundai Santa Fe Limited

1 Answer

2003 Santa Fe has a humming/buzzing sound that can be heard with the windows down. You will only hear it above 40 mph. The sound will go away below 40. Any idea's.


Tough one; Is there a roof rack on that car? The cross members could cause that, they're removable. Try that. If it were tire noise you'd hear them with the windows up even louder. If not the roof rack look for loose moldings esp around the windows.

Jun 17, 2009 | 2003 Hyundai Santa Fe

1 Answer

2007 Hyundai Santa Fe Limited


Hey all,
I was able to get installation instructions for the cross bars from http://www.capitolhyundai.com and from http://dealerfit.com.  Thanks much to these folks for providing a pdf of these instructions free of charge!
Below is the text from the instruction set that worked best for me.  The other instruction set was nearly identical but it had an alternate Step 2 which involved using a small plastic pry bar.  I added that alternate Step below in the instruction step.  Hopefully I'm able to insert the image of each instruction set so that the Figures are visible.  Its actually not that easy getting the rear rail covers off and its pretty easy to crack them.  I'd recommend gently rocking the covers for a couple minutes in order to loosen them up.  Once you get the covers off, the rest of the install is a breeze and can be done in 2 minutes.  If you have questions, go ahead and contact me.  I also took several photos of my install and that might be helpul.  Cheers!
-LePig
-----------------------------------------------------------------------
SANTA FE 2008 PIN U8210-28000 Cross Bar Assembly Installation Procedures
Kit Contents: • (2) Cross Bar Assemblies Required Tools: • Flat Head Screwdriver
INSTALLATION INSTRUCTIONS
1. Carefully unscrew and remove radio antenna. 2. Grasp the rear rail covers with both hands. Squeeze and pull up & inwards (toward the center of the vehicle) to remove covers. Take care not to break off the tabs by lifting the rear section of the cover first (Figure 1). Be careful not to scratch, damage or dent any painted surfaces. DO NOT PRY AGAINST THE VEHICLE BODY, THIS CAN CAUSE DAMAGE TO THE VEHICLE. 2. - Alternate Method - Locate notch in rear of each cover to insert plastic pry bar.  Remove cover by prying up (with tool) and lifting rear at 45 degree angle (Fig 1). Be careful not to scratch, damage or dent any painted surfaces. DO NOT PRY AGAINST THE VEHICLE BODY, THIS CAN CAUSE DAMAGE TO THE VEHICLE. 3. Check assembly clips for damage and dislocation. Replace if necessary. 4. Open the lever on one side of front/rear cross bar. Gently set the cross bar, with the arrows facing forward, into the channel of the side rails (Figure 2). Guide both sides into the track. 5. To adjust cross bars, open lever and place cross bars in desired location. Close lever (Figure 3). Try to move bars forward/back until they lock into place. 6. Reinstall rear covers by holding cover at a 45 degree angle and inserting the front tab into the rear of the roof rack. After aligning, snap cover in place (Figure 4). Be sure that the rubber lip does not interfere with the covers, and that the covers are fully seated. 7. Reinstall the radio antenna. Note: To remove the cross bars, remove the antenna, remove the covers, open lever of cross bar and slide to end of rail. Hold down locking fingers (on both RH/LH rear rail supports) with a flat head screwdriver (Figure 5). This will allow removal of cross bars from the rails.

81e769d.jpg

Jul 02, 2008 | 2007 Hyundai Santa Fe Limited

Not finding what you are looking for?
Cars & Trucks Logo

402 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

75807 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8172 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...