Question about 2003 Buick Rendezvous

1 Answer

Turned ignition on, heard a loud pop and everything went off. tried ignition again, got nothing, no battery turn over, nothing.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Buick Master
  • 5,763 Answers

Start by checking the fuses and then the battery connections, this sounds like a fuse poped maybe a main fuse, if its a fuse then replace the fuse if it pops again then theres a dead short somewhere, these are famous for bad starters and starter relays going bad, so see when fuse pops again if its when key is turned on or when you try to crank the motor, if its when cranking then its mostlikely the relay or starter, this main fuses would be in the engine compartment fuses box.

Posted on Aug 27, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Start problem poping back though intake now want turn over


Popping in the intake can be caused by a number of things:
  1. Lean fuel mixture [can be anything in the fuel system]
  2. Faulty ignition [from the battery to the ignition switch and everything in between to the spark plugs]
  3. Valve timing off [like a timing belt or chain slipped a notch] including bent valves from the timing having slipped
  4. Valve adjustment
  5. Flat cam; lobe(s) worn so that the exhaust valve isn't opening
  6. Crank position sensor
  7. EGR stuck open

Feb 08, 2015 | Cars & Trucks

4 Answers

No power to gauges when key is turned


Hi

check the battery. if battery fails the engine won't start..

thank you

Oct 09, 2008 | 1997 Oldsmobile Bravada

2 Answers

1989 ford escort turns over but wont start


if all you did was this...and and put a new battery in and still wont start...if you have went thru your plugs..wires..distributor..ignition coil...made sure your getting spark..if not..check your relays and fuses..preferebly one that deals with spark and timing for injectors..if everything is fine to that point...then try a crankshaft position sensor...it tells the pcm timing for fuel injectors and fire to the ignition coil...hopefully this helps.

Mar 31, 2013 | 1989 Ford Escort

2 Answers

1999 Crown turned ignition switch to start - heard pop - no electrical power


If nothing works including the lights, something happened between the battery and the fuse box.
There are some fuseable links between the battery and the starter solenoid or between the solenoid and the fuse box.
I'd start with the battery cables and look for those fuseable link wires.

Jul 09, 2012 | 1999 Ford Crown Victoria

1 Answer

I just went outside to crank my car to leave but when i turned the ignition over my car wouldnt start. The lights,radio and everything else is working fine except for some crazy things that popped up on my...


It sounds like the car is still in gear make sure it is set all the way to park, this will give you the same problems. If this does not help repost.

Mar 30, 2011 | 1999 Pontiac Grand Prix

2 Answers

My mercedes s 430 2001wont let the remote key turned everything was fine the everything went dead


If you mean key will not turn in ignition,charge or jump start
Car has electronic ignition switch
If battery is low/flat it will not turn

Apr 27, 2010 | 2001 Mercedes-Benz S-Class

1 Answer

I couldn't start my jeep liberty '04 this morning. Turned the ignition but all i heard was loud clicking noises, radio and lights could turn on, but couldn't start engine. Thought i had to boost up the...


You either have a battery that has come to its final end or you have a bad connection at the battery posts or chassis ground. I'm not sure of the age of your current battery, but 5 yrs is about the most you can expect (with a quality battery of course). You can have the battery load tested at an auto supply chain for noting if they offer this service. Just a thought.

Feb 10, 2010 | 2004 Jeep Liberty

1 Answer

940 VOLVO 2.1 T/DIESEL WENT TO IT TWO DAYS AFTER USING IT, TURNED KEY JUST HEARD CLICKS THEN WENT DEAD, CHECKED ALL FUSES CHARGED BATTERY,STILL SAME. Thankyou


This could be a relay problem. (they appear to be a lot of the electrical problems with volvos.)
try twisting them gently while turning the ignition key.
You will locate them behind the ashtray, but in order to remove/replace them, you will need to remove the housing. 2 screws for the cigar lighter, and it will just 'pop off'.
good luck.

Apr 22, 2009 | 1994 Volvo 940

2 Answers

No power to ignition - ? please help! 91 amigo 2.3l


If everything is turning on, and there's power... check for 12V at the alternator. it may be out now.... or a connector came loose, or wire broke.

Jan 09, 2009 | 1991 Isuzu Amigo

Not finding what you are looking for?
2003 Buick Rendezvous Logo

Related Topics:

303 people viewed this question

Ask a Question

Usually answered in minutes!

Top Buick Experts

yadayada
yadayada

Level 3 Expert

75066 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7754 Answers

Are you a Buick Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...