Question about 2005 Chrysler Town & Country

2 Answers

When I turn on the lights only the side yellow lights come on not the headlights. If I jiggle the light switch sometimes the headlights will come on. Can I get and install the part myself?

Posted by on

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

    Champion:

    An expert who has answered 200 questions.

  • Contributor
  • 264 Answers

HI it sounds like the switch has gone bad I have also had a few ov these vans melt the conector on the back of the switch. you can get the switch and replace it yourself not a bad DYI job.

Posted on Aug 27, 2010

  • Ives44 Oct 06, 2010

    Any suggestions on where to buy a switch other than dealer?

  • wmstalk Oct 06, 2010

    YOU should beable to get the swtich after market from NAPA

×

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Chrysler Master
  • 5,763 Answers

Yes, this is not hard to do,

Posted on Aug 27, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

91 saab dash lights go out when i have high beams on


You will need to replace the headlight switch, that would be fairly obvious wouldn't it?

Jun 10, 2012 | 1996 Saab 900

1 Answer

Headlights


I have a 96 my headlights went out also, my buddy owns a shop so he checked it out and the problem was the two way switch,which is the high/low beam switch. it is expensive $220 new but i found it at a yard for $70 bucks.

Feb 01, 2012 | Cars & Trucks

1 Answer

Schematic to driver side fuse box


Cavity Fuse Description
1) 15 Amp Blue Horn Relay, Power Sunroof
Relay, Power Window Relay
2) 10 Amp Red Rear Fog Lights (Export Only)
3) 20 Amp Yellow Cigar Lighter
4) 10 Amp Red Headlight Low Beam Right
5) 10 Amp Red Headlight Low Beam Left
6) 20 Amp Yellow Body Control Module/Power Door Locks
7 )10 Amp Red Left Park Light/Left Tail Lamp/License Plate Lamp
8) Spare
9) 10 Amp Red Right Park Light/RightTail Lamp/License Plate Lamp/Cluster
10) Spare Cavity Fuse Description
11) 15 Amp Blue Flasher
12) 15 Amp Blue Stop Lights
13) 10 Amp Red Body Control Module/CMTC/Cluster/Pass. Airbag On,Off Indicator, Auto Daylight
Mirror/Light Bar Switch (Renegade Only)
14) 10 Amp Red PDC Fuel Pump/AC Clutch,
Starter Relay/Engine
Controller/Transmission
Controller (Diesel Only)
15) Spare
16) 20 Amp Yellow Power Outlet (Rear)
17) 15 Amp Blue Rear Wiper
18) 20 Amp Yellow Radio Choke & Relay
Cavity Fuse Description
19 20 Amp Yellow
Frt Fog Lights/Trailer Tow
Stop and Turn Lights
20 Spare
21 10 Amp Red Radio
22 20 Amp Yellow
Power Sunroof Relay/
Antenna Module (Export
Only)
23 Spare
24 10 Amp Red PDC Blower Motor
25 10 Amp Red Heated Seat Switches/HVAC
Control Head/Trailer Tow
Battery Charge
26 10 Amp Red Headlight High Beam Right
27 10 Amp Red Headlight High Beam Left
28 Spare
29 10 Amp Red Heated Mirrors/Rear Window
Defroster Indicator
Cavity Fuse Description
30 15 Amp Blue Heated Seat Module
31 Spare
32 10 Amp Red Wiper Switch/Front and
Rear Wipers
33 10 Amp Red SKIM Module/Data Link
Connector
34 15 Amp Blue Body Control Module/
Cluster/Interior Lights,
Hands Free Module/Radio/
CMTC/ITM Module & Siren
(Export Only)
35 Spare
36 10 Amp Red Airbag Control Module/
Occupation Classification
Module (Right Front Seat)
37 10 Amp Red Airbag Control Module
38 10 Amp Red ABS Controller/Shifter Assembly
39 10 Amp Red Hazard Flasher (Turn
Signals)/Backup Lamp
Switch (Manual Transmission
Only)/Transmission Range
Switch (Automatic Transmis

May 23, 2011 | 2005 Jeep Liberty

1 Answer

No break lights, high beams, or turn signal lights


Do they work intermittently? Do your low beams go out sometimes when you put on turn signal? Do hazards work sometimes and if you play with switch they work off and on? I just had a problem with headlights would go off if I put on turn signal and if I jiggled the turn lever they would come back on and had trouble with all light working intermittently, brakes, turn and hazard. It was a Turn signal switch problem.The contacts in the switch were bad, all corroded and green when I took it apart. I know you wouldn't think this would affect brake lights but hey all run through this switch because of hazards and high beams. I got a new switch from dealer and all is working great now. Here's a link a link I used for switch replacement instructions. http://www.jeepforum.com/forum/f11/write-up-replace-turn-signal-switch-97-xj-620147/
If it isn't a fuse or wiring issue I would look into the switch.

Apr 02, 2011 | 1997 Jeep Wrangler

1 Answer

1988 escort tail lights & dashboard lights go out when I turn on headlights. Brake lights & turn signals work fine.


JIGGLE HEAD LIGHT SWITCH,MOVE IN AND OUT REPEATEDLY , WHEN ON AND SEE IF THEY FLICKER OR TRY TO WORK.IF THEY TRY TO WORK YOUR HEADLIGHT SWITCH OR HARNESS PLUG MAY BE BAD

Dec 25, 2010 | 1998 Ford Escort

1 Answer

Headlights wont come on


if you have a test light check for power TO the fuse.there should be power at the fuse at all times.to do this clamp test light to a good ground under the dash and touch the top of the fuse on ether side, power should be at both sides.if you got power, remove the headlight switch,test for power at ether the red,yellow or brown wire,if you have power here,turn on head lights unplug each head light test for power at each socket,test the ground at each socket to do this,clamp your test light to the POSITIVE side of the battery touch the other end to the ground side of the light socket if the test light does NOT light,fix the ground wires this procedure is the quickest so do this first than try the steps above

Jan 20, 2010 | 1988 Ford Bronco II

1 Answer

After market radio wires causes light issue with light switch


check your ground on the radio......... the feed from the lights will test as a ground and the radio will use this as a circuit and turn on the lights. been there done that what a nightmare

Oct 02, 2008 | 1996 Dodge Dakota

Not finding what you are looking for?
2005 Chrysler Town & Country Logo

Related Topics:

74 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8547 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...