Question about 1990 Pontiac Grand Prix

2 Answers

Need to know which plug wire is which - 1990 Pontiac Grand Prix

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 3,092 Answers

Did not say what size engine, you could have a 2.3L 4 cylinder or a 3.1L 6 cylinder, so here's both, hope this was very helpful.

need to know which plug wire is which - a018b22.gifbab4f28.gif

Posted on Aug 27, 2010

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 220 Answers

3.8 V6 Engine Firing Order Picture is looking fom front of vehicle
need to know which plug wire is which - 83646ce.jpg

Posted on Aug 27, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I wire a two wire plug that plugs into an ignition control modular


You really should get an electrician if you dont know this stuff.. There is too much confusion and danger. I know the answer - but I wont tell you .. sorry

Aug 13, 2014 | Cars & Trucks

1 Answer

Need to know how to change plugs & plug wires on


If you have a distributor or just an ignition module with
plug wires, you not only mark them with a ball point pen,
you make a drawing of where things are

You can see the spark plugs,mark both ends of the plug wires
before you start

Draw a picture of the cylinders & look up their numbers
& write it in little circles & have the firing order

The only problem you can have is not knowing what is where,
before you start, so you can replace old or new parts where they
should go

Mar 07, 2013 | Cars & Trucks

1 Answer

How to change the spark plugs and wires


First you need to research your Make and Model vehicle and determine your spark plug size (5/8 or or larger) typically there are only 3 sizes but you'll need to know which as you will have to buy the Spark plug socket to remove them. Next you need to locate a online diagram or Haynes Manual to see if you yourself can reach or change the plugs and wires as some cars are built in such a way that only a Technician would know how to reach them properly. 3rd you will need to determine if the OEM wires (Original Equipment Manuafacturer) part is available (cheaper) or if you will have to buy a aftermarket set (Bosch or ACCEL). Removing plugs will require a Socket wrench, spark plug socket and extension. when putting in new plugs make sure you use Anti-sieze on the thread of the new plugs before installation (keeps from locking up into the head) also make sure you use Plug wire boot lubrication before putting in new wires (this helps make sure that future plug replacement is easy as it will help the boot slide on and off. That's it without knowing your exact make and model.
2_9_2013_1_31_09_am.png

2_9_2013_1_32_06_am.jpg

Feb 09, 2013 | 1996 Plymouth Voyager

1 Answer

Hi, i need to know what order the coloured wires go into the "d6" wiring plug, this is the white plug that plugs into the elecrtic window console


Hi,

You could download the complete wiring diagram from the below link :

http://www.mediafire.com/?obeazqsg08zo15t

You need to have acrobat reader to view the file.

Let me know,if needed further assistance.

Hope i helped you.

Thanks for using ' Fixya ' and have a nice day!!

Aug 09, 2011 | Subaru Impreza WRX STi Cars & Trucks

1 Answer

Need to know where the spark plug wires go on the coil pack


WHAT SIZE ENGINE 2.4L 3.4L OR 3.1L NEED TO KNOW. BECAUSE EACH ENGINE SPARK PLUG WIRE FROM IGNITION COIL TO SPARK PLUGS TO THE ENGINE PLUGS GOING TO BE IN DIFFERENT SEQUENCES.

Aug 04, 2011 | 1999 Oldsmobile Alero

1 Answer

I have a 2005 mistsubishi galant 4 cyl. It has a misfire at cylinder 4. what needs to be replaced? does it have plugs and wires?


yes start with your plugs and then the wires to see if it is the wire pull the cylinder 4 wire off and swap with another plug if it changes to another cylinder misfire then you know its the plug wire. hope this helps and good luck let me know if ya need more..

Jan 24, 2011 | 2005 Mitsubishi Galant

1 Answer

I have a 1998 chevy z-28. need to know how the


The wiper motor has a place for a plug in and the wires should be in a plug that fits it, if you just have loose wires, then someone has cut the plug off and you'll need to replace it.

Mar 17, 2010 | 1983 Chevrolet Camaro

1 Answer

Need to know correct wiring of the 8 spark plug wires


first you need to figure out which one is number 1. the firing order is counterclockwise 15426378

Sep 20, 2009 | 1997 Chevrolet Cavalier

Not finding what you are looking for?
1990 Pontiac Grand Prix Logo

Related Topics:

74 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

yadayada
yadayada

Level 3 Expert

75077 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7768 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...