2006 Pontiac G6 Logo

Related Topics:

Posted on Aug 27, 2010

2006 G6- seat belt light and alarm remains on while driving when seat belt being worn

5 Related Answers

Anonymous

  • 840 Answers
  • Posted on Jan 31, 2009

SOURCE: 2004 Explorer seat belt alarm does not go off when belt connected

no but if you need to drive the vehicle its not hindering anything but the noise/ Please rate my response thank you very much

Ad

Anonymous

  • 2 Answers
  • Posted on Dec 29, 2008

SOURCE: engine light 2006 pontiac g6(reset)

first be sure that its the engine light and not the "service" light. the service light will usually illuminate if its time for an oil change. if its the service light ur owners manual should tell u how to reset it. if its ur engine light then try disconnecting ur positive battery cable for 1 minute. that should reset ur ecm and get rid of the engine light. if the engine light comes back on then have a diagnostic scan done to determine whats causing it. LJ

Anonymous

  • 9 Answers
  • Posted on Apr 17, 2009

SOURCE: seat belt alarm goes off when belt is buckled

try relapsing the switch inside the female of the seat belt

1024d1201421548-seat-belt-alarm-seatbelt-pretensioner.jpg

Anonymous

  • 408 Answers
  • Posted on Mar 25, 2009

SOURCE: srs light come on

hi,send your car to dealer to scan the problem,maybe erase fault is require ,or you can found the exact defective part,ty

Anonymous

  • 3600 Answers
  • Posted on May 24, 2009

SOURCE: SEAT BELT BUZZER WHERE IS IT

does it do it on the driver side? hook it up without sitting in the seat start the rig if the buzzer is on sit in the seat if it is still on you have a bad ground on the seatbelt side the short belt that it connects to. the buzzer is under the dash driver side above the sterring wheel.

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
2answers

2006 Pontiac G6. I need the layout for a serpentine belt please.

Question edited for clarity and add some CAPS.
Question moved to model category.

In this link and also videos on replacing the serpentine belt on the G6.

https://www.google.com/search?q=2006+pontiac+g6+serpentine+belt+diagram

.

1helpful
1answer

I have a 2006 Jeep Grand Cherokee. The seat belt alarm goes off constantly with the seat belts fastened or not fastened.

There is an electrical contact in the bottom of the seat belt buckle, and associated wiring that has a connector under the seat. Check that with a multimeter for continuity.

Also, this is a function of the Body Control Module, so you may have a communication problem. This can only be solved or confirmed by getting an auto electrician to connect a pro grade scan tool computer to the OBDII port and checking.

https://www.google.com/search?q=2006+jeep+grand+cherokee+disable+seat+belt+chime

..
0helpful
1answer

Warning chime sounds but no lights or messages are visible

usually it's an indication that the passenger airbag is activated but the seat belt isn't buckled... usually due to the activation of the seat weight switch... got a dog sitting in the seat?
0helpful
1answer

2006 grand cherokee seat belt

Have the same problem in my 98 Toyota Rav4. I squirted the female buckle (bolted to seat, not holding strap harness) with wannabe WD-40 lubricant from the $1 store, and it seem to have solved the problem. I'm guessing the spring mechanism is worn out, which is why the harness buckle won't lock. Another solution is to replace the female lock buckle with an identical part from the used parts junkyard store.

The seatbelt light on the dash stays "on," even when everyone has their belt on, but I don't bother servicing that. If yours have an audible alarm instead of an indicator light on the dash, locate the source of the alarm sound and disconnect the wires to silence the sound.
0helpful
1answer

ALARM KIND OF NOISE THAT WILL NOT STOP WHILE DRIVING. IN AUDI 2006

does it come from inside the cabin might be a fault with the seats or seat belts as when you get in and dont put your seat belt on it makes a beeping noise untill the seat belt gets put on is it this noise could be a faulty seat sensor wouldent of thought it was the turbo hissing or screeming yes but not a buzzing noise but then i could be wrong hope this helps ivan
0helpful
1answer

Seat belt lights come on when driving down the road

sensor on the seat belt fastener bad. Wiggle it to make it go off with the seat belt locked in place or change the sensor.
3helpful
1answer

Seatbelt light and alarm on while driving and waring it?

Check the belt latch,(the short belt you click in and push button to release). It has a sensor in it. Tap and shake it as it may have a foreign object in it. Look under the seat for the connector(s), and make sure they are pushed in all the way and that the wires aren't damaged. If that doesn't help, try disconnecting the connector. If the light and alarm are still on afterwards.....you have two choices. First, replace that part of the belt. Or, try running a jumper wire across the two contacts in the connector but I cant tell you that!!
0helpful
1answer

On a 2006 pontiac g6 do i have to take off motor mount to install serpentine belt

YEP IF THE TOP ENGINE MOUNT ON TOP OF DRIVE BELT.YOU GOING TO HAVE TO SUPPORT ENGINE.THEN REMOVE TOP ENGINE MOUNT TO GET TO THE BELT.NOW IF YOU SEE NO ENGINE MOUNT AROUND OR ABOVE DRIVE BELT.YOU ARE IN THE CLEAR.
0helpful
2answers

Srs light come on

hi,send your car to dealer to scan the problem,maybe erase fault is require ,or you can found the exact defective part,ty
Not finding what you are looking for?

839 views

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...