Question about 2006 Ford Fusion

1 Answer

I need to change the spark plugs on my 2006 Ford Fusion V6 3.0L. Do you have a diagram that shows where they are and the order in which they need to be changed? I can't seem to find this information anywhere.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 3,092 Answers

No order, just do one at a time. on the engine there will be a valve cover on each side of the engine, below is a valve cover, the arrows are pointing to is the ignition coil packs, coil packs might have a plastic cover over them, if so remove cover, disconnect harness from coil, remove small bolt holding coil pack, pull up on coil, remove spark plug, do the same on other side of engine, don't forget to check spark plug gap, the spark plug gap is .050", hope this was very helpful.

I need to change the - 1e7dc68.png

Posted on Aug 27, 2010

  • Lfaust Jun 21, 2011

    Do you need to remove and replace in intake gasket on the back side

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2006 ford fusion fuse box diagram


Here you go , www.bbbind.com you can check it out for yourself . click on technical Information , five rectangular box's will pop up ,click on All TSB's and diagrams for every make and model - FREE .Next page go to the bottom an click on I agree , Next page click on wiring diagrams ,then add your vehicle info . then under system click on electrical distribution , then subsystem fuse panel ! then click search , then click on the blue link . 2006\FM\WRFM06FUS018a .

Feb 09, 2013 | 2006 Ford Fusion

1 Answer

COIL PACKS KEEP BLOWING ON 2006 V-6 FORD FUSION


2006 ford 500 number five coil pack keeps blowing, what could be causing this ?

Feb 16, 2012 | 2006 Ford Fusion

1 Answer

Ford fusion tdci cranks over but will not fire


i have a fusion to did u check all the wiring to the spark plugs is there gas? check the air cleaner put new plugs in for sure and wires do that first

Jan 21, 2011 | 2006 Ford Fusion

2 Answers

I have a 2006 Ford Fusion, 4 cylinder. Rough


please say you did not get the engine steam cleaned...as you can cost yourself a LOT of money.hopefully the heat will dry things out, otherwise get the car put on a diagnostics machine.

Jun 20, 2010 | 2006 Ford Fusion

1 Answer

Firing Order diagram for 2006 Ford Explorer


Hope this helps. The ignition coil:
  • changes low-voltage pulses from the PCM to high-voltage pulses.
  • fires 2 spark plugs simultaneously.
  • has 3 transformers.
    • One transformer fires the spark plugs for cylinders 1 and 5
    • One transformer fires the spark plugs for cylinders 2 and 6
    • One transformer fires the spark plugs for cylinders 3 and 4
Spark plug wires:
  • carry high-voltage pulses from the ignition coil to the spark plugs.
The spark plugs:
  • change high-voltage pulses to spark at the gap, which ignites the fuel and air mixture.
The firing order is 1-4-2-5-3-6.

69efa96.jpg

Jun 06, 2010 | 2006 Ford Explorer

1 Answer

Need a diagram on how a serpentine belt goes on the pullys 2006 ford fusion 2.3L Automatic


Autozone will show you on the computer. Also, a sticker was pasted to the top of the radiator... must have been lost.

Oct 12, 2009 | 2006 Ford Fusion

1 Answer

2007 Ford Fusion shaking when stopped


Sounds like a missfire, check spark plugs and HT leads from coil, they suffer from water damage from the windscreen washer jets. If water found you will need new coil, plugs Ht leads and revised washer jets from ford.

Good luck Davelee

Mar 15, 2009 | 2006 Ford Fusion

Not finding what you are looking for?

Open Questions:

See all 2006 Ford Fusion Questions

2006 Ford Fusion Logo

Related Topics:

2,443 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76070 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5520 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...