Question about 2006 Toyota 4Runner

1 Answer

Replacing front turn signal light bulb on 2006 toyota 4runner

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 6 Answers

You have to crawl under the car to get this done. Identify the location of the bulb then crawl underneath and locate the appropriate connector. Grab the connector with your hand and twist the connector right-to-left. The connector will then disengage from the plastic housing and you can withdraw the connector and the bulb from the housing. Once disconnected, grab the bulb with one hand and the connector with the other, and pull out the bulb straight out (no twisting). Replace is the reverse. Easy. Should take less than 1 minute.

Posted on Jun 27, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 1998 Toyota 4runner turn signal and hazard light not working. Changed the fuses relay and flashers. Still doesn't work


Check all the turn signal bulbs. Check their sockets for corrosion. Look for damaged wires going to the sockets. Make sure you have the correct bulbs.

Feb 26, 2015 | 1998 Toyota 4Runner

2 Answers

My left front blinker flashes quickly. - The left


Check for power at the socket. If there is no power I would suspect the flasher relay wich supplies power to each bulb individually after it gets the right or left signal from the switch.

Sep 08, 2013 | 2007 Toyota 4Runner

1 Answer

4runner flasher not working


the bulb has 2 fillaments and one is burnt out replace the bulb

Jul 26, 2012 | 2007 Toyota 4Runner

2 Answers

When putting on the left or right turn signal or flashers the two front lights do not flash. Also noticed that as the rear flash, it is faster than normal.


sounds like a bad bulb or flasher...
If the light outside light up , but do not flash.... then plink the flasher ( round silver bulb in the fuse box) with a finger and see if they start working...

Sep 24, 2010 | 2004 Toyota 4Runner

1 Answer

Where can I find the fuse or relay for the Left turn signal?


If it's just the left one that is giving you trouble, the problem is likely just a bad bulb. They share the same relay. Turn the signal light left, go out and check to see if both bulbs are on. There is a good chance one isn't. Replace it. If that isn't the problem, then you'll have to start checking wires. Get a test light to start with, and see if there is power in the bulb socket. Keep tracing your way back until you find some voltage. It is also possible that both bulbs are burnt out, if neither lights up with the switch on.

Jan 28, 2010 | 2006 Toyota 4Runner

1 Answer

How to change 4 runner front blinker light. there's a phillips screw under the hood I have removed but there is another fastener in the lower portion of the blinker housing I cannot locate.


Remove or disconnect the following:
  • Connector
  • Screw
  • Claw fitting
  • Front turn signal lamp assembly
  • Front turn signal lamp plug assembly
  • Front turn signal lamp bulb as shown
6191f4c.gif
c741133.gif
To Install:
  1. Install or connect the following:
    • Front turn signal lamp bulb
    • Front turn signal lamp plug assembly
    • Front turn signal lamp assembly with screw
    • Connector

Oct 01, 2009 | 2004 Toyota 4Runner

1 Answer

How to replace a fog lamp with replacement bulb only on 2002 toyota 4runner sport edition???? the three screws on the bottom?


Well, these are the steps and I will post the pic here in a second...looks like 2 screws...but like I said, you can see the picture for direction on this.


Remove or disconnect the following:

Front turn signal lamp
  • Connector
  • 2 screws
  • 2 claw fittings
  • Fog lamp assembly
  • Fog lamp bulb as shown
  • Fog light unit

  • To Install
    1. Install or connect the following:
      • Fog light unit
      • Fog lamp bulb as shown
      • Fog lamp assembly latch the 2 claw fittings and 2 screws
      • Connector
      • Front turn signal lamp
    Trying to post the pics now....

    May 14, 2009 | 2002 Toyota 4Runner

    1 Answer

    1996 4runner Front Turn signal failure


    the problem might be a flasher unit. try to replace it

    Apr 03, 2009 | 1996 Toyota 4Runner

    1 Answer

    I had a left front turn signal out and replaced both turn signals now they both don't work...help


    maybe when you took the signal light out you twisted the bulb and blew the fuse.

    Feb 22, 2009 | 1995 Toyota 4Runner

    Not finding what you are looking for?
    2006 Toyota 4Runner Logo

    1,717 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Toyota Experts

    yadayada
    yadayada

    Level 3 Expert

    76132 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22156 Answers

    Jeff Turcotte
    Jeff Turcotte

    Level 3 Expert

    8273 Answers

    Are you a Toyota Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...