Question about 2000 Lincoln Town Car
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
There are level control sensors they look like little arms (with joints like your elbows) mountesd on lower control arms. They may be at fault they control the height and turn the pump off when the height is reached. try adjust height first before you replace, they can be adjusted. Good Luck
Posted on Dec 17, 2008
Those Lincolns are notorious for that,I'd just get a set of coil springs out of a Crown Victoria cop car(junk yard)and swap them out.Done it many times,you can do it in about an hour,and they'll never leak down again.By the way,there's some O-rings in that system.Make some soapy water and spray every connection,just maybe you'll get lucky.
Posted on Nov 10, 2009
It is located under the air cleaner box. the fuse is located with the relay in the fuse box under the hood, it is not marked but there should be info in the owners manual.
Posted on Nov 21, 2009
the compressor is in the left front fender behind bumper cover, there is a retrofit kit to go to hard coils, only like 130 bucks..... best bet some one prob charge 50 bucks to install and prob solved easily
Posted on Jan 20, 2010
Tips for a great answer:
Dec 25, 2015 | Cars & Trucks
Dec 08, 2013 | 2000 Lincoln Town Car
Nov 30, 2013 | 2000 Lincoln Town Car
May 28, 2012 | 2000 Lincoln Town Car
Jun 25, 2011 | 2000 Lincoln Town Car
Jun 24, 2010 | 2000 Lincoln Town Car
Jun 03, 2010 | 2000 Lincoln Town Car
Feb 27, 2010 | 1999 Lincoln Town Car
Nov 15, 2009 | 2000 Lincoln Town Car
113 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: