Question about 2003 Honda Civic

1 Answer

Fitting new cambelt on a honda civic 1.7d 2003 after cambelt failure need diesel pump timing mark.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 110 Answers

You will need a Locking pin kit for timing the Pump to the Engine - and of course detailed instructions so that you do not damage anything - which can cost you quite a bit of money.

I beleive that your engine is an Izuzu. In any event, you will need to use the alignment/Locking pins on the Engine AND the Injector Pump.

Posted on Aug 27, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Have the freelanders from 2002 got fitted a chain cambelt ?


Freelander TD4 diesel has a chain (mega bucks), L series diesel (pre BMW engine) has a belt (plus a small belt for the injection pump). the K series 1,8 petrol and KV6, 2.5L also have belt's.

Jun 03, 2014 | 2003 Land Rover Freelander

1 Answer

Cambelt timing marks 4jx1


sounds like the injector sleeve O rings have failed this was common.
if you put a clear plastic piece of hose on supply line for diesel fuel filter to head fitting at front and fuel is not black but normal diesel colour thats good.
then put clear hose on return line fitting at rear of cylinder head and fuel is now darker, engine oil is by passing injector sleeve top O rings and entering into fuel gallery in head.
rocker cover, injector rail, injectors need removing and injector sleeves need replacing as well as O rings and seats.
a special tool is needed to remove the injector sleeves out of the head. you will also need to drain the cooling system before removing the injector sleeves, so coolant is also needed.
dealers have special tool for injector sleeves

Mar 28, 2014 | 1998 Isuzu Trooper

1 Answer

Got audi a4 1996 diesel need to change cambelt but


A diesel uses a different procedure. You'll need a tool to hold the camshaft pulley parallel to the top of the cylinder head. The timing mark to set TDC for piston #1 is located on top of bell housing. The pointer must be aligned on the diamond cut on the flywheel. A VW/Audi setting bar tool #2065A is needed to lock the camshaft in position. Lock the injection pumpin position using the special lock pin (VW/Audi special tool no. 2064). Caution: If the drive belt is broken or has jumped time, do not attempt to lock the sprocket at this time!!! You will also need VW/Audi special tool no. VW210 to measure belt tension between camshaft sproket and injection pump sprocket. So good luck.

May 01, 2010 | 1996 Audi A4

4 Answers

Does 2003 Honda Civic DX 4DR has timing belt? If Yes when to replace it?


Yes and 80,000 miles and change the water pump the same time too

Apr 06, 2010 | 2003 Honda Civic

1 Answer

Honda Civic vtech 1.6 (2003) poor fuel consumption


the more air the less your tire touch the ground and as a result your going to get better gas milage.

Mar 16, 2010 | 2003 Honda Civic

2 Answers

I need to know the timing marks on my 2003 kia sedona diesel auto so i can fit my cylinder head


There are timing marks on each sprocket, align these and install the timing belt.

Apr 27, 2009 | 2003 Kia Sedona

1 Answer

When is cambelt change due on Honda Civic Aerodeck 1.6Ls Manual .


should be 80 to90 thousand miles ck with dealer

Dec 17, 2008 | 1996 Honda Civic

2 Answers

Crancshaft pullt jamming up


You must have #1 on TDC and the camshafts on the timing mark to fit a new belt , I rekon yer valves are fouling the piston .
Ignore the mark on the pump pulley .

Nov 25, 2008 | 1998 Isuzu Trooper

2 Answers

2003 Honda Civic -LX Timing belt


90000 Miles on the Timing Belt. Do not let this go! A timing belt failure can cause internal engine problems.

Should cost around 200 or so, depending upon your local labor rates.

Good Luck!

Brian

Jun 17, 2008 | 2003 Honda Civic

Not finding what you are looking for?
2003 Honda Civic Logo

Related Topics:

328 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

74896 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7688 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...