Question about 2005 Mazda 3

1 Answer

My mazda 3 is making a ticking noise when I accelarate

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 157 Answers

Many Mazda 3's have this problem. The first solution is the engine mount on the passenger's side has a rubber-like gasket which may be cracked or defective. Take a look with a flashlight and see if yours is in good shape.

If it is in good shape then it can be something within the dash that is vibrating when your engine speeed increases. First remove all times from any consoles or compartments you have from the front of the car. Drive around and see if that eliminates the problem.

If not, check if the air vents are tight. Hold them from their outer frame and try to wiggle them around. If they are loose, you will need to seal them. If that is fine, then you will need to remove the dash cover and put the car of a lift to replicate the sound and try to notice which item or component is vibrating. You may need to hold different components with a pair of insulated pliers as you do this.

Posted on Aug 27, 2010

  • tylrmrtn77 Oct 03, 2010

    It could be any of those above but, Have you thought it might be a ticking valve?

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

My truck started making a bump noise driving home from work today and I could feel it underneath in the middle of the truck. It did it every one-two minutes. It has never done it before. What is it?


look under truck and see if anything is wrapped around drive shaft also if looks good u joints may be going bad also check the center bearing and bracket its a support hanger bearing for driveshaft

May 23, 2016 | 2000 Mazda B-Series

1 Answer

2000 mazda mpv makes grinding noise when starting now wont start without jump as just ticks over


Look for a seized pulley on the serpentine belt. Also, may be stripped starter gear or flexplate ring gear.

Nov 29, 2015 | Mazda Cars & Trucks

1 Answer

CAR WONT START AND HAS A TICKING NOISE


Locate the starter and hit it with a hammer they stick sometimes making them tick good luck hope this helps

Jul 15, 2011 | Mazda Tribute Cars & Trucks

1 Answer

Getting a ticking noise with light acceleration. With increased speed, the ticking gets faster also. Sounds like right fron, but can't be sure. it only happens when it is in gear and moving.


hi

this problem seems to be like some thing from the wheels touching the statinary parts. because of this when you accelarate the rate increases. please take to the mechanic they wil manage to find it.

Jul 12, 2010 | 2004 Volvo XC90

1 Answer

Ticking or clicking noise fr left side of car mazda mx5 it does have low surpension


is this clicking when you turn the wheel and make a turn ? if so then the cv axle needs to be replaced.

Jun 14, 2009 | 1992 Mazda MX-5

1 Answer

Noise


IF THIS IF WHEN ITS TICKING OVER IT MOST PROB THE ALTERNATOR ,, THESE DO MAKE A PURRING NOISE WHEN ON WAY OUT

Apr 07, 2009 | Kia Sedona Cars & Trucks

1 Answer

Heavy ticking noise in right front end


Check your lug nuts that they are all tight!
You should always double check when you change are rotate tires. at least once the next week. Could also be a hubcap.

Dec 28, 2008 | 2007 Mazda 3

3 Answers

Mazda 323 1.3 1996


the lifters are naking noise because they are worn out or the engine oil is not reaching them due to the oil pump,but due to your cars year they might be just worn out there is only one way to fix a problem like this is to get then replaced there is no quick fix,and also they will just get louder and louder like tick tick tick and it will sound quicker.

Jul 07, 2008 | 1994 Mazda 323

Not finding what you are looking for?
2005 Mazda 3 Logo

Related Topics:

329 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8211 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...