Question about 1994 Isuzu Rodeo

1 Answer

How do we connect Isuzu rodeo 3.2L plug wire - 1994 Isuzu Rodeo

Posted by on

  • Duane Wong
    Duane Wong Aug 27, 2010

    Do you mean the firing order?

  • bennokyam Aug 27, 2010

    yes

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Isuzu Master
  • 6,826 Answers

FIRING ORDERS NOTE: To avoid confusion, remove and tag the spark plug wires one at a time, for replacement. If a distributor is not keyed for installation with only one orientation, it could have been removed previously and rewired. The resultant wiring would hold the correct firing order, but could change the relative placement of the plug towers in relation to the engine. For this reason it is imperative that you label all wires before disconnecting any of them. Also, before removal, compare the current wiring with the accompanying illustrations. If the current wiring does not match, make notes in your book to reflect how your engine is wired. Fig. 1: 1.8L, 2.0L and 2.3L engines Firing Order: 1–3–4–2 Distributor Rotation: Counterclockwise how do we connect Isuzu - 86862g37.gif
Fig. 2: 2.6L and 2.8L engines Firing Order: 1–3–4–2 Distributor Rotation: Clockwise 86862g39.gif
Fig. 3: 3.1L engine Firing Order: 1–2–3–4–5–6 Distributor Rotation: Counterclockwise 86862g40.gif
Fig. 4: 3.2L engine Firing Order: 1–2–3–4–5–6 Distributorless Ignhow do we connect Isuzu - 86862g76.gif 86862g76.gif
prev.gif next.gif

Posted on Aug 27, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2000 Isuzu Rodeo aux power outlet on the front dash cooks anything that gets plugged into it


Sounds like a short in the socket. Often times dirt and junk get into the socket and can short out the connection.

Sep 09, 2012 | 2000 Isuzu Rodeo

1 Answer

1997 isuzu rodeo 5 misfire i changed the coils from 3 to 5 and still the same problem. i have no lose wiring. what do i do


Replace the spark plugs and plug wires is your next step unless you have already done this.

Sep 28, 2011 | 1997 Isuzu Rodeo

1 Answer

I have a 97 isuzu rodeo and can not find a wiring diagram that matches the wiring I have for the radio. Any ideas?


Did you buy a connector to plug the radio directly into the truck harness. You shouldn't need to know the wiring in the truck, since the aftermarket connector does the truck side for you. wire the connector into the radio then just plug it right in. The connector's wires will have words written on each on to tell you which wire it connects to on your radio. You can pick one of these plugs up from your local Walmart for under $10 in the stereo department.

Jan 10, 2010 | 1997 Isuzu Rodeo

1 Answer

92 Isuzu Rodeo Power loss


Do you have the v 6 or the 4 cyl.?
You may want to check the cap and rotor, and check to make sure all elctrical connections and vacuum hoses are tight and in good condition. Then go from there.

Jul 06, 2008 | 1992 Isuzu Rodeo

1 Answer

Isuzu Rodeo w/3.1L engine


Front Passenger side on cap is 1 - if you look on the inside of your cap there SHOULD be a pin marked with a 1, and the plugs go CLOCKWISE not counter. Just had the same problem myself with my 91 Rodeo. Cylinders are as follows Passenger side (front to back) 1 - 3 - 5, Driver side (front to back) 2 - 4 - 6. I called the Isuzu dealer and they told me it was counter clockwise, but when I hooked it up that way it backfired through the Carb.

Jul 05, 2008 | 1992 Isuzu Rodeo

1 Answer

1992 Isuzu Rodeo Distributor wires 3.1L engine


Hi,
Isuzu seem to have complicated things by changing engines, firing orders and even direction of rotation! As you can see, they've numbered the cylinders the other way than the 3.2L.

The Firing sequence for the 3.1 (traditional distributor) 6 cylinder is as follows -

d6e5b2a.jpg

If you take the distributor cap off, there should be a "No.1" formed on the inside. Stick a lead on this before you put the cap back on and go from there.
As leads are different lengths, you may have to swap a few to find the best fit.

I think 2 of them will look out of place - but that's the way it's designed. Just make use of clips for holding them neatly.

Thanks for using Fixya.









Jul 05, 2008 | 1992 Isuzu Rodeo

1 Answer

1992 Isuzu Rodeo Distributor wires


Hi,

On the 3.2L distriburorless ignition, the firing order is a straight 1-2-3-4-5-6.

Cylinder numbering .

88c39f7.jpg-

Hope this works for you

Jul 05, 2008 | 1992 Isuzu Rodeo

Not finding what you are looking for?
1994 Isuzu Rodeo Logo

Related Topics:

402 people viewed this question

Ask a Question

Usually answered in minutes!

Top Isuzu Experts

yadayada
yadayada

Level 3 Expert

76070 Answers

Steve Hurc
Steve Hurc

Level 3 Expert

450 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you an Isuzu Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...