Question about Ford Mustang

1 Answer

My horn in my 2007 mustang gt is not honking I checked my fuse and it is fine.

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Contributor
  • 157 Answers

Contacts under the AIR BAG , would have shop look into that for you dont mess with the steering wheel or it will deploy

Posted on Aug 27, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

On 2002 olds Intrigue, installing new horns but as soon as wires are plugged in horn honks . Removed horn fuse and relay but horn still honks .when pushing horn button ,with no horns, the relay clicks


You may have wires that have become crossed. The wire to the horn and a hot wire have probably lost the outer insulation and crossed each other causing the horn to start honking when it is connected. Check the wires with an electrical tester.

Oct 25, 2016 | Cars & Trucks

1 Answer

Car was starting and running fine, then suddenly lost all electrical, no crank no start and the horn keeps honking. I changed out the ignition module and the DIM/body control module


That sounds like a burglar alarm, immobiliser issue if the horn goes off. Did you pull a wire when you were under the hood?

The items you swapped out have no bearing on the problem you have, except for possibly the fuses. Did you check what those blown fuses protect?

2000 Buick LeSabre fuses Bing images

Sep 30, 2015 | 2000 Buick LeSabre Limited

1 Answer

Why won't my horn work on my 1991 jeep cherokee laredo?


the horn is simple , a horn a relay and switch, and fuse 15?.

but is complex by other factors.

1: the clock spring . no air bags in 1991, so very easy.



there are 2 ways to diagnose any horn..

1: hot wire it, does it now honk? if yes, hot wire the relay does it honk now?

2: or use any voltmeter ever made and find out why.



#2 is the save way.



id hot wire the horn and make sure that 1991 ground bolt

mount is really still at ground potential. id bet that bolt has

long sense rusted, and is useless, like most are by now.



the fuse and relay are both in the PDC

the PDC means, engine bay fuse box in gringo. (non jargon)

http://www.jeep4x4center.com/knowledge-base/index.htm?utm_source=cj#service

here is 93 for free.

see horn page one and the 2 tests.

or see the schematic.

at there, see the fuse box see fuse 15 (PDC 15?)

same chapter, see PDF page 90 (sheet33)



as you can see if the fuse is good.

12vdc arrives at the Horn relay on 2 pins.

if the horn switch works the relay ENERGIZES (closes)

and 12vdc arrives at the horn, and it honks

if while honking, the horn casing is 12vdc,

then means the horn is no longer grounded, a common happenstance.



if the relay dont energize check the horn ring contacts or connectors to it for continuity.

the relay can be tested, in the car.

like this.

honking

pin 2 and 5 are 12v

pin 1 = 0 volts

pin 4 is 12v, if 0v the relay is bad.



easy huh., ?

May 14, 2014 | 1991 Jeep Cherokee Briarwood

1 Answer

I have a 2007 Trailblazer and I have been having trouble with the horn what can I do?


help us try to help you, what is it doing? honking when ever it wants or what? I would hunt down the horn and check the wires..
fuses, ect

Sep 27, 2013 | 2007 Chevrolet Trailblazer

1 Answer

My remote start just stop working on my 2012 mustang gt, the horn just honks 2-3 times now instead of starting


since its a 12 bring back to dealer have them reset program -some of the problems can be --weak battery in fob----if their is a problem that sets off a check engine----battery went dead -----program hiccup but vehicle should be under warranty

Dec 09, 2012 | Cars & Trucks

1 Answer

I have a 2008 chrysler 300 and I installed an alarm system. I connected the factory horn to the alarm using a relay. I installed a relay under the hood and got the power from the battery the problem is...


you have either a blown fuse or the factory wire harness isnt connected to horn first check fuse owners manual will have location and description of fuses if ok retrace your steps when you hooked horn to new alarm you disconnected wire at horn or you cut the wire to access horn wiring

hope this helps
plz vote leave a comment if need more help reply

Jan 18, 2011 | 2008 Chrysler 300

1 Answer

When I start my 2000 ford mustang the horn starts to honk and will not stop. How can I dosconnect the horn?


IT SOUNDS LIKE YOUR CAR COULD BE IN THE ALARM STATE AND YOU MAY HAVE A PROBLEM
YOUR HORNS ARE LOCATED INSIDE THE DRIVERS SIDE FENDER AND ARE A PAIN TO GET TO
BUT JUST UNPLUG THE HORNS, SHOULD BE 2 HORNS

Jan 07, 2011 | 2000 Ford Mustang

1 Answer

Car stuck in park after pulling "stop horn" fuse on 07 Honda Civic. Horn was honking after jump starting it.


You will need to replace that "stop horn" fuse since it also feeds power to the stop lamps and the gear shifter solenoid, when you step on the brake pedal. Your best bet is to unplug the horn on the vehicle(to stop it from honking) until you can get it fixed. That way, you will be able to shift out of park to get it to a shop for repairs.

Oct 18, 2010 | 2007 Honda Accord Sedan

1 Answer

Need to find the horn relay in a 1993 ford mustang gt I tested the horn and all fuses. I don't have a wiring diagram and chiltons doesn't show the horn circuit


94 was a new model freshening and I have 94. may be similar.

Horn Relay and fuse is in fuse box in engine compartment, driver side in front of strut tower.

Horn System The horn system includes:
  • Dual horns (13832) (one high pitched, one low pitched).
  • Horn blow switch (13A875) which grounds the horn relay, which energizes the horns .
--------------------------
8422261.gif

Apr 19, 2009 | 1993 Ford Mustang

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

128 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5516 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...