Question about 2000 Ford Crown Victoria

1 Answer

Crown victoria lx 2000 4.6 no injector pulse theres spark but injectors wont open.

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Ford Expert
  • 1,868 Answers

Hello! Number 1 suspect is the Throttle Positioning Sensor (TPS)...It can be tested using a volt meter...If you do not have one let me know...
The TPS is mounted on the throttle body and held in place by two bolts...It has a three wire connector...Wire colors are...Gray/White...Brown/White...And Gray/Red...Using two safety pins...Push one pin into the rear of the in-place connector on the Gray/White wire...And the other on the Brown/White wire...Place + probe of meter (set to read 5 volts) on the Gray/White and the - probe on the Brown/White...Turn key to on...Meter should read less than 1 volt (.85)...Move the + probe with safety pin to the Gray/Red wire...Should read 5 volts..Send results...

Guru..........Saailer.

Posted on Aug 27, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have no injector impluse


no injector pulse - DodgeForum.com

dodgeforum.com/forum/2nd-gen-ram.../269362-no-injector-pulse.html
Nov 21, 2010 - no injector pulse 2nd Gen Ram Tech. ... but was running and driving fine before. as far as i can tell i have no injector pulse. tested with a noid ... No spark AND no fuel injector pulse ONLY when van is cold ...
Nov 18, 2013
2000 ram 1500 Has spark but no injector pulse wont start ...
Jun 25, 2013
v10 RAM no start....frustrated
Sep 19, 2011
help - no spark, no injector pulse, no run
Oct 30, 2009
More results from dodgeforum.com

No injector pulse 02 Ram 1500 - DodgeTalk : Dodge Car Forums ...

www.dodgetalk.com > ... > 3G Dodge RAM - General Talk
May 30, 2012 - No injector pulse 02 Ram 1500 3G Dodge RAM - General Talk

Oct 23, 2015 | Dodge Cars & Trucks

2 Answers

My 05 Crown Vic LX is misfiring Cylinder 1 2 and 3.


Your next step would be to check for injector pulse (signal at injector) and are the injectors working. Is the miss while driving, at idle, under load, or decell? What codes are u getting?

Oct 22, 2014 | 2005 Ford Crown Victoria

1 Answer

1985 crown victoria wont start


You'll have to figureout if it is a fuel or ignition problem.Have you checked for trouble codes, does it have spark at the coil, and can you see fuel spray at the injectors ?

Jun 30, 2012 | 1985 Ford Crown Victoria

1 Answer

No injector pulse


1991 this make you OBD1 . You can access a code by jumping 2 terminals together.The injector pulse is from the PCM . If you have no pulse you need to troubleshoot for spark first . If you dont have spark do spark first then injector pulse comes on. If no injector pulse check fuse in engine junction box.Use a volt meter check grounds at PCM. If all else checks out good replace PCM. You may also want to check the TPS. If this sensor short out in the WOT position you also wont get injector pulse.SO disconnect the TPS. and recheck for injector pulse

Feb 23, 2012 | 1991 Chevrolet Caprice

1 Answer

My 1996 crown vic will not start motos turns over and trys to start but wont I have replaced intake manifold spark pulgs. motor has spark


basics,,,air,,fuel,,spark,,compression,,timing,,,pull a few plugs,,smell them for fuel,,if dry,,,take snorkel off throttle body,, open throttle body or flap half way,,spay a little starting fluid or injector spay into throttle put the snorkel back on see if motor fires up,,if so then ck fuel delivery & pressure,,,,hope it helped

May 28, 2010 | 1996 Ford Crown Victoria

1 Answer

Just bought a 2000 crown Victoria police interceptor from a auction. when it is idling it feels like it has a miss i have changed the spark plugs with Bosch Platinum 4 prong, air filter, fuel filter, PCV...


Well first off you need to put Motorcraft spark plugs in your vehicle, and it sounds like you have a bad coil..Take it to autozone, or Advanced Discount..depending on your location, an they can scan it for free. An then you will know what direction to go in.. Goodluck..

May 07, 2010 | 2000 Ford Crown Victoria

1 Answer

Wont start\good fuel pressure\good spark


Then the fuel injectors are not pulsing,replace the crankshaft sensor,it controls the spark,but also the pulse for the injectors.

Jan 30, 2010 | 2000 Buick LeSabre

1 Answer

Will not start


check fuel pressure injector pulse, compression, and spark

Dec 03, 2009 | 1998 Ford Crown Victoria

4 Answers

Cylinder 4 misfire on a 2000 crown victoria interceptor


first cylinder 4 is the last on the passenger side . first pull the coil out and check if there is water where the plug is. if there is take the water out and dry up the coil. if you find water you got a crack manifold or a bad intake manifold gasket. if there is no water replace the coil. good luck

Apr 10, 2009 | 2000 Ford Crown Victoria

Not finding what you are looking for?
2000 Ford Crown Victoria Logo

Related Topics:

488 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

fordexpert

Level 3 Expert

5530 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...