Question about 2001 Chevrolet Impala

1 Answer

In my 2001 Impala LS, sometimes the vent and digital display by sunroof (one with Temp/Compass, Fuel info, etc) do not turn on. After a while of moving the vent control from off to full and back, moving the vent option knobs around, the vent finally kicks on. At the same time the air starts flowing the digital display also turns on. This just recently started. 130k miles. Any ideas why this is happening?

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Contributor
  • 157 Answers

Sounds like a bad connection to me , check both items and their related connections, if they are tight and connected , disconnect them and see if there are any burn marks from bad connection.

Posted on Aug 27, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 2007 checy impala read "calibration complete" what does that mean ????


CALIBRATION COMPLETE
Refer to Electronic Compass Calibration do you have an owners manual ?
Compass Calibration
The compass direction will show CAL if it needs to be calibrated. Before calibrating the compass, drive the vehicle to an area that is magnetically clean (free of large metallic objects).
  1. Turn ON the ignition.
  2. Before calibrating the compass, make sure the compass is set to the variance zone in which the vehicle is travelling. See Compass Magnetic Variation Adjustment below.
  3. Press the vehicle information button until the PRESS TO CALIBRATE COMPASS screen is displayed.
  4. Press the set/reset button to start the compass calibration.
  5. The DIC will display CALIBRATING: DRIVE IN CIRCLES. Drive the vehicle in circles at less than 8 km/h (5 mph) to complete the calibration. The DIC will display CALIBRATION COMPLETE when the calibration is complete.

Oct 02, 2016 | 2007 Chevrolet Impala

1 Answer

My rear view mirror with temp and compass sometimes will not work. It will show all the digital shows up at once and not the temp, but sometimes it works ok. What can I do?


Does the compass work when the temperature goes out? If the compass still works then chances are that the ambient temp sensor is defective. Also, could be wiring to the sensor. If the compass goes out with the temperature then chances are the mirror itself is defective. Cheapest most common problem is the ambient temp sensor. It's behind the grill by the condenser at the front of the vehicle.

Aug 20, 2014 | 2003 Chevrolet Silverado 1500

1 Answer

06 impala sunroof will not open


It could be the switch itself, I had to replace the switch on my Impala LS when the sunroof quit working.

Sep 17, 2013 | 2007 Chevrolet Impala LS Sedan New Cars

2 Answers

Where is the compass control module located at on the '07 tacoma


The compass control unit is located within the overhead console that displays direction, etc. It is not an external sensor.

Dec 21, 2010 | 2005 Toyota Tacoma

1 Answer

I need to take display panel for temp and compass out to check connection, 2001 f 150 super crew lariat sunroof


Could be 1 of 2 types.
1st type has a single crew in the bottom of the overhead console, with a screw in it, and spring clips towards the display.
2nd type is held on with spring clips only, they are hard to pull out the 1st time.
Check which type you have.
The display, chances are the display has had one of the resistors come loose, these are 51 ohm resistors, and could just have 1 side that came unsoldered, or could be missing all together.
This is what the SuperDuty overhead console looks like when the resistors are missing ( these are 68 phm resistors, different than the F-150 ), to give you an idea of what to look for.
faadd21.jpg

Sep 10, 2010 | 2001 Ford F150 Styleside SuperCrew

2 Answers

Overhead instrument panel is out


This is a very common problem with the overhead console from several mid 2000 ford trucks and SUVs. The console is very prone to internal failure. I offer a reasonable repair service with a lifetime guarantee, check it out: www.autoclockrepair.com
There is a bunch of useful info there. Drop me an email if you have questions, thanks!

Dec 08, 2009 | 2001 Ford Explorer Sport Trac

1 Answer

Chevy Impala SS 2005 sunroof wont open at all


Disconnet sunroof motor and check for power and ground with switch on. If there is 12v available and ground is good, replace the motor.

Aug 07, 2009 | 2007 Chevrolet Impala LS Sedan New Cars

Not finding what you are looking for?
2001 Chevrolet Impala Logo

Related Topics:

92 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76649 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8522 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...