Question about Chevrolet Silverado 1500

1 Answer

Exploded view of rear end - Silverado 1500 Chevrolet Cars & Trucks

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 1,498 Answers



Hi there,

My name is Mike. A couple times a day I go looking around to give some pointers to our clients (you).

Look at it your question from our point of view, You want an exploded view of a rear end that may or may no belong on a Chevy car or truck. We need a little more info.

More is better:

If you are serious about getting an answer, include Make, Model and year of the rear end.

Describe your problem clearly, concisely and with as much detail as possible.

For future reference:
Often, a problem can be the result of a seemingly unrelated event. It is always a good idea to include a recent history.

Additional information such as what steps have already been taken, has the product ever worked, is it new, etc. can have a bearing on providing the best solution for your particular circumstances.

Remember, you are a key participant in this process. We are not there, you are. We depend on you to be our eyes and ears. We can only respond to what you provide us. Without you, all our talent is worthless. How's that for an ego build?

What you get out of the experience depends on what you put in to it. So help us help you.

It would be also be advantageous in your case to repost your problem so that it is correctly categorized and starts over at the top of the queue. This way it can be directed to someone with expertise in the area you need.

Best regards

Mike
exploded view of rear end - e86b923.gif

Posted on Aug 27, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I find a drawing/ exploded view of the front driveline/u-joints/cv joints on a 2003 ford ranger 4x4?


google " drawing/ exploded view of the front driveline/u-joints/cv joints on a 2003 ford ranger 4x4", several sites come up including a video on how to change them out

Dec 11, 2014 | Ford Cars & Trucks

1 Answer

Looking for exploded view of front end body parts of 98 deville


The best place to see exploded views for your car is at an online GM parts supplier such as newgmparts.

Sep 10, 2014 | 1998 Cadillac DeVille

1 Answer

Exploded view for front end


the FSM covers this.
as does, alldata.com $15 subs. get it.
its all there, every detail....... no need to guess.

Oct 03, 2013 | Jeep Cherokee Cars & Trucks

1 Answer

Schematic diagram for parts of a Honda jazz 1.4 dsi 2008 please


Go to the dealer and have them bring up the exploded parts views for you on the area of the damage.

Oct 31, 2012 | Cars & Trucks

1 Answer

Exploded view of 1952 Chevy front end area


Sorry we do not have any diagrams available to us for that far back. Below is a picture of a stock front end

9_4_2012_6_51_07_pm.jpg

Sep 04, 2012 | Chevrolet DELUXE Cars & Trucks

1 Answer

Need a schematic for a 342 rear end on a 1997 chevy 1500 4-wheel drive P/U truck


When I need an outline of parts in a rearend I go to LMCtruckparts.com and choose your year model of truck and you will find an exploded view of the internals for the rear you are requesting along with the proper names and parts avaliable.

Nov 18, 2011 | 1997 Chevrolet K1500

1 Answer

Truck will not start, wanted to check starting celinoid1995 niss pick up


Solenoid Replacement
  1. Remove the starter.
  2. Unscrew the two solenoid switch (magnetic switch) retaining screws.
  3. Remove the solenoid. In order to unhook the solenoid from the starter drive lever, lift it up at the same time that you are pulling it out of the starter housing.
  4. Installation is in the reverse order of removal. Make sure that the solenoid switch is properly engaged with the drive lever before tightening the mounting screws.
zjlimited_2021.jpg

Fig. 4: Exploded view of S114-605, 606B, 607 and 608SA type starters-1989-95 models (click image for zoom)




zjlimited_2022.jpg

Fig. 5: Exploded view of M3T38482 type starter-1989-95 models




zjlimited_2023.jpg

Fig. 7: Exploded view of S114-527A type starter-1989-95 models


zjlimited_2024.jpg

Fig. 8: Exploded view of M1T60281 type starter-1989-95 models


zjlimited_2025.jpg

Fig. 9: Exploded view of S114-703A type starter-1989-95 models




Brush Replacement
NON-REDUCTION GEAR TYPE

  1. Remove the starter.
  2. Remove the solenoid (magnetic switch).
  3. Unfasten the two end frame cap mounting bolts and remove the end frame cap.
  4. Remove the O-ring and lock plate from the armature shaft groove, then slide the shims off the shaft.
  5. Unfasten the two long housing screws (at the front of the starter) and carefully pull off the end plate.
  6. Using a screwdriver, separate the brushes from the brush holder.
  7. Slide the brush holder off of the armature shaft.
  8. Crush the old brushes off of the copper braid and file away any remaining solder.
  9. Fit the new brushes to the braid and spread the braid slightly.
Use a soldering iron of at least 250 watts.
  1. Using a light-grade solder, solder the brush to the braid. Grip the copper braid with flat pliers to prevent the solder from flowing down its length.
  2. File off any extra solder and then repeat the procedure for the remaining three brushes.
  3. Installation is in the reverse order of removal.

When installing the brush holder, make sure that the brushes line up properly.
REDUCTION GEAR TYPE
  1. Remove the starter and the solenoid.
  2. Remove the through-bolts and the rear cover. The rear cover can be pried off with a small prytool, but be careful not to damage the O-ring.
  3. Separate the starter housing, armature, and brush holder from the center housing. They can be removed as an assembly.
  4. Remove the positive side brush from its holder. The positive brush is insulated from the brush holder, and its lead wire is connected to the field coil.
  5. Carefully lift the negative brush from the commutator and remove it from the holder.
  6. Installation is in the reverse order of removal.

Starter Drive Replacement
NON-REDUCTION GEAR TYPE
  1. With the starter motor removed from the vehicle, separate the solenoid from the starter.
  2. Remove the two through-bolts and separate the gear case from the yoke housing.
  3. Remove the pinion stopper clip and the pinion stopper.
  4. Slide the starter drive off the armature shaft.
  5. Install the starter drive and reassemble the starter in the reverse order of removal.

REDUCTION GEAR TYPE
  1. Remove the starter.
  2. Unfasten the solenoid and the shift lever.
  3. Remove the bolts securing the center housing to the front cover and separate the parts.
  4. Remove the gears and starter drive.
  5. Installation is in the reverse order of removal.

Hope this helps (remember to rating this answer and leave a testimonial comment) Thank you for using Fixya.


Oct 12, 2011 | 1995 Nissan Pickup

2 Answers

Lookin for exploded view point on a 91 buick century for front end parts


Hi,

If you register a free account at autozone.com (no affiliation) and add your vehicle to your profile, you can access a lot of repair guides with the exploded view drawings. Hope this helps!

Mar 10, 2011 | Buick Century Cars & Trucks

1 Answer

Where is the oil pressure sending unit on the 1998 olds silhouett


Just above and slightly to the left of the rear end of the starter motor on the front side of the engine. Best to work on this with the engine cold as the front exhaust manifold is just above it

Apr 30, 2009 | 1998 Oldsmobile Silhouette

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

382 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75005 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7710 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...