Question about 2005 Chrysler Town & Country

1 Answer

Hello the passanger sliding door will not open by remote, door pillar or overhead switch there is no audible pinging to warn of door opening or lock or motor noise. other side door and tailgate all power open and closed normally

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 36 Answers

Check you're sliding door harness this is normal in this type of door the wires will brake after few years of used. change the harness

Posted on Aug 27, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2004 venture power sliding door clicking only


The clicking may be from a stripped control gear/ rod that opens and closes the door .

Mar 18, 2014 | Chevrolet Venture Cars & Trucks

1 Answer

How do i reprogram the power sliding door on a 2005 buick terraza


From the owner's manual:

If your vehicle has

the dual power sliding doors, both doors will have

to be reset. To reset a door, do the following:

1. Check to be sure the power sliding door is

unlocked and securely closed.

2. Turn the ignition to LOCK.

3. If the power sliding door overhead console

switch is in the override (deactivation)

position, return to the activation position.

4. Open the sliding door using the remote

keyless entry transmitter, overhead console

switch, or passenger switch. Allow the door to

travel fully open.

If the door does not travel to the fully open

position, press the overhead console switch to the

override (deactivation) position and slide the

door fully open and closed. Check for foreign

objects in the tracks. Repeat the procedure starting

with Step 1. If the door resists travel to the fully
open position, see your retailer for service.

Dec 27, 2012 | 2006 Buick Terraza

1 Answer

I HAVE REPLACED THE BATTERY IN MY KEY FOB BUT IT IS NOT WORKING. IS THERE ANYWHERE I CAN BUY A NEW CIRCUIT BOARD FOR IT?


NOTE: If a double audible warning sounds during the programming procedure a system malfunction has occurred. Repeat programming procedure.
Obtain all keys fitted with remote control. Open driver's door. Operate headlamp high/low beam switch to flash high beam position and hold. Insert key into ignition switch, turn to ACC position. Ensure system LED flashes once and an audible warning sounds. Operate headlamp high/low beam switch to flash high beam position 5 times. Ensure system LED flashes once and an audible warning sounds. Programming mode activated: Press and release lock or unlock button on first key. Ensure system LED flashes once and an audible warning sounds to indicate correct programming. Repeat programming procedure for remaining keys. Switch ignition OFF and remove key. Close driver's door. Check operation of keys. Keys can also be programmed using diagnostic equipment.

Mar 21, 2010 | 2002 Jaguar S-Type

1 Answer

Key fobs not working i have changed the battries on both


: If a double audible warning sounds during the programming procedure a system malfunction has occurred. Repeat programming procedure.
Obtain all keys fitted with remote control. Open driver's door. Operate headlamp high/low beam switch to flash high beam position and hold. Insert key into ignition switch, turn to ACC position. Ensure system LED flashes once and an audible warning sounds. Operate headlamp high/low beam switch to flash high beam position 5 times. Ensure system LED flashes once and an audible warning sounds. Programming mode activated: Press and release lock or unlock button on first key. Ensure system LED flashes once and an audible warning sounds to indicate correct programming. Repeat programming procedure for remaining keys. Switch ignition OFF and remove key. Close driver's door. Check operation of keys. Keys can also be programmed using diagnostic equipment

Jan 31, 2010 | 2002 Jaguar X-Type

1 Answer

Power sliding door handle does not work. Can open


check on the door wih the door open if there is a child safety lock. this is ussualy on the part of the door that engages the lock on the van and sould be clearly marked

Jan 16, 2010 | 2003 Chevrolet Venture Passanger

1 Answer

2003 Honda Odyssey - Passanger side sliding door won't lock.


Try to disconnect the battery for about 30 minutes this should reset the computer for you.

Jul 19, 2009 | 2002 Honda Odyssey

1 Answer

2007 Quest: The passenger side sliding door will not open


There is a wiring problem on your drivers side passanger door switch.

May 10, 2009 | 2007 Nissan Quest 3.5 Minivan

1 Answer

Power sliding door will not open automatically when closed


sounds like the child safty lock is on you can find it by looking in your book for your car

Nov 24, 2008 | 2004 Chevrolet Venture Passanger

2 Answers

2002 Chrysler T&C sliding door won't UNLOCK w/ Switch or Key FOB


the other locks work correctly.

quick fix is to clean the contacts that the door makes when you close it. there are contacts on the door pillar (probably look like little copper circles) on the door itself there will be some spring loaded contacts... make sure they work freely and are clean.

Robert

Sep 08, 2008 | 2002 Chrysler Town & Country

1 Answer

1997 venture keyless remote programming


SYSTEM OPERATION

System warning lamp located on top of the instrument panel
Press UNLOCK button once , turns on interior lamps and deactivates alarm (if fitted)
Press UNLOCK button twice w/in 5 seconds unlocks all doors, turns on interior lamp and deactivates alarm (if fitted)
To activate alarm system (if fitted):
Switch ignition OFF
Open driver's door
Press Lock button on remote
Close Driver door
warning lamp will flash when system is activated
Press remote power sliding door button will open sliding door (if fitted) only if unlocked first
Pressing remote panic button:
*Sounds horn intermittently
*Flashes exterior lamps
*Turns on interior lamps
**Pressing panic for the second time OR switching ignition ON deactivates alarm.


PROGRAMMING
Remobe key from ignition switch
Remove the "BCM PRGRM" fuse, from the fuse box
Close all doors
Turn ignition switch to the ACC position
With in 1 SECOND , turn the ignition switch to OFF then back to 'ACC'
(really, with in one second)
Open and close the driver's door. A chime will sound, indicating programming mode activated
Press and HOLD LOCK and UNLOCK SIMULTANEOUSLY untill a chime sounds 2 times ( about 15 seconds)
Repeat this exact procedure for all remotes to be programmed
Remove key from ignition
Refit 'BCM PRGRM' fuse.

4 REMOTES MAXIMUM CAN BE PROGRAMMED

Aug 24, 2008 | 2000 Chevrolet Venture

Not finding what you are looking for?
2005 Chrysler Town & Country Logo

282 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8202 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...