Question about 1998 Toyota Corolla
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
nox is from running lean..... its realy high temps that cause this.......... replace the o2 sensors this should cure that any more help let me know
Posted on Oct 24, 2008
SOURCE: My 1981 Toyota Corolla won't
A Vehicle This Old Must have Very High Millage, And it is Possible that there is NORMAL wear that has taken place that Unfortunatly ONLY a NEW or Newer Engine Will solve this Problem. IF ALL OTHER OPTIONS IN REPAIR HAVE BEEN EXHAUSTED--Such as Major tune up Valve adjustment - Emision system inspected and CLEARED of Defects , The Only FIX is A New Engine. As Part of my Job for some 25 + years I Have had to be the Bearer of BAD NEWS such as this, Good Luck 1981 toy Cor Millage is????
Posted on Jan 13, 2009
A code P0441 could mean one or more of the following has happened:
What does that mean? This indicates that a part of the EVAP control system is no longer fuctioning correctly. The EVAP system consists of many parts, including (but not limited to) the gas cap, fuel lines, carbon canister
, purge valve, and other hoses. The (EVAP) emission control system prevents the escape of fuel vapors from a vehicle's fuel system. Fuel vapors are routed by hoses to a charcoal canister for storage. Later, when the engine is running a purge control valve opens allowing intake vacuum to siphon the fuel vapors into the engine.
EVAP emission canister purge is contolled by a valve which allows engine vacuum to pull stored fuel vapors from fuel tank
into the engine to be burned, rather than be vented to atmosphere. A vacuum switch is used to detect when flow exists. If the PCM commands purge and sees that the switch is closed (indicating no detected purge flow) P0441 is set.
Posted on Jan 29, 2010
Tips for a great answer:
May 30, 2016 | Toyota Cars & Trucks
Apr 08, 2016 | Cars & Trucks
Jul 08, 2015 | 1992 Isuzu Rodeo
Nov 28, 2013 | Chevrolet S 10 Cars & Trucks
Dec 04, 2011 | Ford Cars & Trucks
Mar 30, 2010 | 1997 Chevrolet Cavalier
Mar 21, 2009 | 1991 GMC K2500
Oct 08, 2008 | 1997 Toyota RAV4
Aug 14, 2008 | 1989 Toyota Corolla 2 Door
63 people viewed this question
Usually answered in minutes!