Question about 2002 Mitsubishi Lancer

2 Answers

What is the correct torque i need to use when changing my 02 lancer oz rally clutch?

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 8 Answers

Clutch - 14 +/- 2 ft-lbs thats the spec u need

Posted on Aug 27, 2010

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 7,353 Answers

Depends on what you are torqing?

Posted on Aug 27, 2010

  • clomasr Aug 27, 2010

    im replacing the whole clutch...so i have the clutch place alignment tool slave cylinder and pressure plate... and i dont know the torque specs for the pressure plate

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 2002 mitsubishi Lancer manual oz rally edition and I'm having trouble switching gears, like it's hard. Any idea what this might be?


If the shifter moves freely when engine is off. Its possible that the clutch is not fully dis-engaging causing stiff gear changes. May be time for a clutch

Apr 04, 2015 | 2002 Mitsubishi Lancer

1 Answer

I put in about half a centimeter too much oil in 2002 lancer oz rally. is this going to be a problem?


90 percent chance no. I would still take the five minutes and drain some from the pan. Won't even have to take the plug all the way out for the little bit.

Jan 10, 2014 | 2002 Mitsubishi Lancer OZ Rally

1 Answer

Cant find fuel pump relay mitsubishi lancer 02 oz rally


The MPI relay is usually behind and underneath the radio in the center console.

Dec 28, 2013 | Mitsubishi Lancer Cars & Trucks

1 Answer

Engine wire harness diagram for 2002 lancer oz rally


I am really impressed in your blog.....and Thank you for sharing this information...It is Very interesting..<a href=" http://www.pcmofnc.com/"> Trailblazer SS parts</a>

Nov 11, 2013 | 2002 Mitsubishi Lancer

1 Answer

I have a 02 lancer oz rally. Yesterday I left work stopped at a gas station and filled up. As I went to leave I put the car in first gear with no problem but when I pushed the clutch again to stop the car...


hydraulic clutch
replace the master and slave cylinders
cable clutch
replace the cable
if cable also check the engine mounts for failure as if the engine is allowed to move , the clutch action is affected

May 04, 2017 | 2002 Mitsubishi Lancer

1 Answer

What are the steps to bleed the clutch on a mitsubishi lancer oz rally


On most cars it's pretty much the same. Make sure the reservoir is full and leave cap off it. Get a small crescent, dot3 fluid and another person. Have them pump up the clutch and hold it to the floor. You open the bleeder on the slave cylinder and let it squirt until stops. Close bleeder. Check reservoir and add if needed. Repeat. Do this about 3 times and will do the trick unless you have a leak in the line.

Sep 02, 2010 | 2002 Mitsubishi Lancer

Not finding what you are looking for?
2002 Mitsubishi Lancer Logo

Related Topics:

202 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts

yadayada
yadayada

Level 3 Expert

75817 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8180 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...