Question about Mitsubishi Galant

Open Question

Can you tell me tappet clearance for 1988 sohc 4g63 2000cc please

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 84 Answers

SOURCE: valve clearance

Hello, For all 615, 616 (4cyl) and 617 (5cyl) through 1985 model year is:
cold intake 0.10mm or .006in
exhaust 0.35mm or .014in
hot intake 0.15mm or .007in
exhaust 0.40mm or .016in
CYA, Gator241

Posted on Feb 06, 2009

  • 1 Answer

SOURCE: Valve tappet adjustment

well, I can see ur message has been here for quite some time. Most probably you got the answer to ur request.
I just did the valve clearance on the engine of my SJ413 that has the 1000cc engine of an SJ410 :
When cold: 0.13mm Intake and 0.18mm Exhaust
Engine sounded well and worked fine after that.
Enjoy
Mehdi

Posted on Feb 07, 2009

  • 608 Answers

SOURCE: how to measure tappet clearance with dial gauge

When setting tappets, it has to be born inind that the valve stem wears an indentation into the face of the rocker. This prevents a really accurate tappet adjustment, so the customer is right again. If you do not posess a tappet setting dial gauge, a normal engineers dial gauge will do just as well. The procedure is the same as using your feeler gauge except that you set the dial gauge up on the cylinder head with the pointer resting on the head of the rocker. Press down fairly firmly on the rocker valve end and zero the gauge. Next lift up on the rocker and read off the clearance, from the gauge, Use a magnetic base to support your gauge and repeat the pocedure for each valve pair.

Posted on Mar 25, 2010

  • 2926 Answers

SOURCE: What is the valve tappet

Intake: 0.007-0.009 in. (0.18-0.22mm) Exhaust: 0.009-0.011 in. (0.23-0.27mm)

Posted on Apr 08, 2011

  • 3 Answers

SOURCE: could you please email me

do i have to take the timing belt off 2 do a water pump on a mitsubishi 4g63 sohc

Posted on May 09, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hey there I need the exhaust and Intake(valve) clearance for a komatsu 300-6 please


note Perform the valve clearance check and adjustment at the engine cold state. 1.Remove all of the ignition coils. 2.Remove the cylinder head cover.
caution Turn the crankshaft always clockwise. 3.Turn the crankshaft clockwise, and align the timing mark on the exhaust camshaft sprocket against the upper face of the cylinder head as shown in Figure. Therefore, No.1 cylinder goes to the compression top dead center. 4.Using a thickness gauge, measure the valve clearance with the arrow shown in Figure. If deviated from the standard value, make note for the valve clearance.
Standard value:

    Intake valve 0.20 ± 0.03 mm (0.008 ± 0.0012 inch)
    Exhaust valve 0.30 ± 0.03 mm (0.012 ± 0.0012 inch)
5.Turn the crankshaft clockwise 360 degrees, and put the timing mark on the exhaust camshaft sprocket in position shown in Figure. Therefore, No. 4 cylinder goes to the compression top dead center. 6.Check the valve clearance with the arrow shown in Figure. In the same procedure as 4.
7.If the valve clearance is deviated from the standard value, remove the camshaft and the valve tappet. For the camshaft removal, refer to Camshaft Removal and Installation . 8.Using a micrometer, measure the thickness of the removed valve tappet. 9.Calculate the thickness of the newly installed valve tappet through the following equation.
A: thickness of newly installed valve tappet
B: thickness of removed valve tappet
C: measured valve clearance
Equation

    Intake valve: A = B + [C - 0.20 mm (0.008 inch)]
    Exhaust valve: A = B + [C - 0.30 mm (0.012 inch)] note The valve tappet ranges 3,000 - 3,690 mm (0.1181 - 0.1453 inch) and has 47 types per 0.015 mm (0.0006 inch). The thickness below a decimal point is stamped on the reverse side of the valve tappet. 10.Install the valve tappet selected through the procedure 9, and put the camshaft in position. For the camshaft installation, refer to Camshaft Removal and Installation .
    11.After installing the timing chain, measure the valve clearance using the procedure 3 to 6. Confirm the clearance is within the standard value.
    caution Completely remove all the old FIPG, which might be remaining among the components. 12.After completely removing the liquid gasket adhering on the timing chain case, cylinder block and cylinder head, degrease them with white gasoline.
    caution The cylinder head cover should be installed within 3 minutes of applying liquid gasket.
13.Apply a 4 mm bead of liquid gasket as illustrated.
Specified sealant:
    THREE BOND 1217G or equivalent
14. Install the cylinder head cover and tighten the tightening bolts using the following procedures.
(1) Temporarily tighten to the following torque in order shown in the illustration.
Tightening torque: 3.0 ± 1.0 N·m (27 ± 8 in-lb)(2) Tighten to the specified torque in order shown in the illustration.
Specified torque: 5.5 ± 0.5 N·m (49 ± 4 in-lb)15.Install the ignition coils.

Jan 23, 2017 | Cars & Trucks

1 Answer

Valve clearance and voltage regulator pin out +,-, Stator, Service Manual PDF download


petrol tappet clearance on petrol engines run around .010" hot inlet and .012" hot exhaust ( .009" and .011" would be minimum )
setting to no clearance will hold both valves off the seats and make starting and running difficult
as to splicing wires , you will need a chematics to get it correct
generally the practice is red is active and black is neutral with green as ground /earth
go google and type in wiring schematics for ( make and model of unit ) and see if there is a pdf version to down load

Aug 17, 2016 | Cars & Trucks

1 Answer

Citreon saxo 1.1cc 2002year tappet clearance


Saxo 1.1 dessire anyone no clearances on tappets mine are 0.2 front 0.4 back and won't start

Sep 06, 2012 | Mitsubishi Pickup Cars & Trucks

1 Answer

Will a d15b7 water pump be compatiable with a d16y8 water pump


I hope this helps, it all I could find.

1991

CRXL4 - 1.5L 1493cc type D15B2 - MFI GAS SOHC
2 vehicles
1988 - 1989

CRX 1500 HFL4 - 1.5L 1493cc - MFI GAS SOHC
3 vehicles
1988 - 1990

CRX DXL4 - 1.5L 1493cc type D15B2 - MFI GAS SOHC
2 vehicles
1990 - 1991

CRX HFL4 - 1.5L 1493cc type D15B6 - MFI GAS SOHC
4 vehicles
1988 - 1991

CRX SIL4 - 1.6L 1590cc type D16A6 - MFI GAS SOHC
4 vehicles
1988 - 1991

CivicL4 - 1.5L 1493cc - MFI GAS SOHC
1 vehicles
1988

Civic 1500 DXL4 - 1.5L 1493cc - MFI GAS SOHC
4 vehicles
1988 - 1991

Civic 4WDL4 - 1.6L 1590cc type D16A6 - MFI GAS SOHC
3 vehicles
1989 - 1991

Civic CXL4 - 1.5L 1493cc - GAS
4 vehicles
1992 - 1995

Civic CXL4 - 1.5L 1493cc type D15B8 - MFI GAS SOHC
4 vehicles
1988 - 1991

Civic DXL4 - 1.5L 1493cc type D15B2 - MFI GAS SOHC
4 vehicles
1992 - 1995

Civic DXL4 - 1.5L 1493cc type D15B7 - MFI GAS SOHC
3 vehicles
1993 - 1995

Civic Del Sol SL4 - 1.5L 1493cc type D15B7 - MFI GAS SOHC
2 vehicles
1990 - 1991

Civic EXL4 - 1.6L 1590cc type D16A6 - MFI GAS SOHC
4 vehicles
1988 - 1991

Civic LXL4 - 1.5L 1493cc type D15B2 - MFI GAS SOHC
4 vehicles
1992 - 1995

Civic LXL4 - 1.5L 1493cc type D15B7 - MFI GAS SOHC
1 vehicles
1988

Civic SEL4 - 1.5L 1493cc - GAS
3 vehicles
1989 - 1991

Civic SIL4 - 1.6L 1590cc type D16A6 - MFI GAS SOHC
2 vehicles
1992 - 1993

Civic VXL4 - 1.5L 1493cc type D15Z1 - MFI GAS SOHC

Jul 11, 2011 | Honda Civic Cars & Trucks

1 Answer

What are the intake and exhaust valve tappet clearance specs. of a honda civic 1999 1.6 liter vtec sohc engine?


Valve clearance Inches Millimeters
Intake 0.006-0.007 0.15 - 0.19
Exhaust 0.007-0.008 0.17 - 0.21

Apr 08, 2011 | Honda Civic Cars & Trucks

1 Answer

What is the valve tappet clearance specs. of a honda civic 1999 1.6 liter vtec sohc engine?


Intake: 0.007-0.009 in. (0.18-0.22mm) Exhaust: 0.009-0.011 in. (0.23-0.27mm)

Apr 08, 2011 | Honda Civic Cars & Trucks

1 Answer

Need to know original 4g37 engine 1.8 galant 1988 tappet valve clearance


intake .006
exhaust .010
jet valve "if applicable" .010
note:adjust when engine is hot

Mar 11, 2011 | 1988 Mitsubishi Galant

1 Answer

How to measure tappet clearance with dial gauge


When setting tappets, it has to be born inind that the valve stem wears an indentation into the face of the rocker. This prevents a really accurate tappet adjustment, so the customer is right again. If you do not posess a tappet setting dial gauge, a normal engineers dial gauge will do just as well. The procedure is the same as using your feeler gauge except that you set the dial gauge up on the cylinder head with the pointer resting on the head of the rocker. Press down fairly firmly on the rocker valve end and zero the gauge. Next lift up on the rocker and read off the clearance, from the gauge, Use a magnetic base to support your gauge and repeat the pocedure for each valve pair.

Mar 25, 2010 | 1988 Mitsubishi Cargo

2 Answers

TAPPET SETTINGS HONDA PRELUDE 2.2 IMPORT


Intake valve clearance 0.15mm-0.19mm (6-7 thou); Exhaust clearance 0.17mm-0.21mm (7-8 thou). All measurments COLD engine. 2.2 VTEC Prelude engine 1992-1996, import and UK.

Feb 22, 2009 | 1994 Honda Prelude

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

312 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts

yadayada
yadayada

Level 3 Expert

75077 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7768 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...