Question about 1991 Honda Civic

1 Answer

The car was running fine, then it wouldnt start. Good fuel at the filter, good spark, I put a spare spark plug in the spark plug wire connector and grounded it, the spark looks good, no code on the error code display, just the first blink.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,309 Answers

Do a fuel pressure test and an injector signal check, easier done with a noid light

Posted on Aug 27, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2000 mercury cougar will not start


If it is getting spark I will assume the timing belt is working.
You say the fuel pump is good, so what is the fuel pressure at the rail ?
Are the spark plugs wet or dry ? Can you get it to try to start by using starting fluid ?
You may have to get someone to check the computer for trouble codes which requires a scanner or code reader.

Apr 06, 2013 | 2000 Mercury Cougar

2 Answers

When I go to start, it turns over but will not start. replaced fuel pump, but did not help.


Check your starter solenoid, (put key in run position and use a jumper wire to make contact to the two large terminals) if it starts replace the solenoid, located on the inner fender well. If there is no difference then replace the ignition module.

Feb 16, 2011 | 1991 Ford F150

1 Answer

Ok 1989 Honda Prelude S. It starts fine,..can drive for undetermined amount of time starts to lose power sputter like its running out of gas. Pull over turn key off, sit a min or so start and go til it...


Check Fuel pressure with gauge to see pressure is not out more that 5 psi variance of spec. If initial pressure is good, Start with Vulture pump and then on to the ground on the sending unit in the tank attached to the fuel pump assembly. Easy access through the trunk. Ground wire insulation should not be brittle an cracked.Replace wire with 14 stranded THHN or wire from spare harnessing. Wire should be pliable and have good mechanical connection on the spade connector. Ensure clean connection as corrosion of dissimilar metals will invite corrosion over time.

Dec 20, 2009 | 1989 Honda Prelude

1 Answer

My 1995 chevy corsica ran fine one day and the next morning wouldnt start. It trys to turn over but wont start. Spark plugs and coil packs are fine. Fuel filter is fine. What could cause this?


Try tapping on your PCM behind your glove box,also are you getting fuel pressure and a good blue spark at the plugs when cranking the engine?

Sep 26, 2009 | 1995 Chevrolet Corsica

1 Answer

97 Tarus wont start


recheck spark by putting a plug into one of the plug wires and place on valve cover, crank engine and see saprk in that plug. check fuel pressure during cranking to verify fuel supply. If you have no fuel pressure check fuses and fuel pump relay, in fuse box and power distribution box under the hood. If all are good check for power at the fuel pump connector with the key in start position, in run position the power will only be there for about 5 seconds, you are correct with fuel and spark it should run, let me know what you find

May 21, 2009 | 1996 Ford Taurus

1 Answer

95 Chevy S-10 starting issues


If the engine is turning over and it still wont start try shooting a little starting fluid in the air cleaner to see if it will run .. if so your fuel pump is either bad or the fuel filter is getting dirty.. thanks and holler if you need more Jerry

May 11, 2009 | 1998 Chevrolet S-10 Pickup

1 Answer

1996 Olds ciera, V6, Engine dies when put in drive


Try disconnecting the electrical connector at the transmission and see if it stall when you put it in gear. You will get a service engine light, but not to worry, it will go back out once you reconnect.
By disconnecting the wire connector we can tell if it is transmission related.
Good luck, let me know.
Regards,

Mar 08, 2009 | 1996 Oldsmobile Cutlass Ciera

3 Answers

Starting problem with honda civic


Next things to check are fuel and spark, remove a spark plug and with the wire attached crank the motor, if you see spark in the plug then it's not a spark issue and probably a fuel problem. If there is no spark could be bad plugs or wires, or distrubitor cap. To check fuel remove injector cover and crank motor, if there is no fuel coming out then check fuel filter, fuel pump.

Good Luck

Jun 27, 2008 | 1998 Honda Civic

Not finding what you are looking for?
1991 Honda Civic Logo

Related Topics:

58 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

76649 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...