Question about 1995 Ford Ranger Supercab

1 Answer

I have a 96 ford ranger 4x4 with a 4.0 manual tranny i have never did this before but hey cant be to hard right.i need to replace my (clutch kit) clutch master cylinder and the slave cylinder and the hydraulic line need to get a manual that shows me everything as possible. my buddys that was helping me do this that are very expierienced in doing this went to iraq any suggestions

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 7 Answers

You need a special tool to disconnect the hydraulic line from the slave cylinder, you should be able to pick one up at your parts store.

Posted on Aug 26, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Full hard clutch on 1997 ford ranger


needs a new clutch kit end of story

Jan 28, 2013 | 1993 Ford F150 SuperCab

1 Answer

Need to replace clutch


Wow, your just starting..the good thing its easy. remove the shaft by taking off the UJoint from the rear end. The shaft the slides out from rear of tranny. Then remove cross member for tranny. remove shifter. Remove bolts from bell housing and your good..(PS Change slave cylinder if Manual).

Jun 16, 2009 | 1998 Ford Ranger SuperCab

1 Answer

1983 Ford Ranger Gear grinding


Your clue is probably that when you pump the clutch twice that it works. I don't know about the 83's but the 96 or so on up have automatic clutch adjustment & when the clutch is worn out that part will not adjust anymore and will create the problem, just like th 97 that i have & haven't changed the clutch yet... (too lazy - waiting for it to totally quit before i fix it) So my guess is that if you haven't changed the clutch, pressure plate t/a bearing stuff, you may need to do that. Ford guys should have told you that.... hope this helps, rick

Apr 17, 2009 | 1995 Ford Ranger Supercab

1 Answer

Transmision


That is a lot of miles on the tranny. Being a Ford it probably has the E4OD tranny. The E4OD has several clutch packs in side. Sounds as though your direct drive clutch pack has gone out. Also the torque converter has a lock up mechanisim in side which may have given up the ghost . This tranny has improved over the years from the origional version. But, this tranny needs frequent service if towing a heavy trailer. Once the fluid gets burned it needs to be changed immediately or problems will result if you let it go and try to change later. Just to purchase a rebuilt if it is a E4OD will be around $3400.00. If you want to rebuild it the parts cost for just a basic kit will be around $900.00 to do it correctly. There are many hard parts to check for tolerances internally. By hard parts I am referring to sun and planetary gears and what not. I hope this has helped. I have rebuilt many Ford trannys over the years and the E4OD can be problematic at times. The newer versions are more reliable.

Feb 07, 2009 | 1999 Ford Ranger SuperCab

2 Answers

Ford ranger 1997 2.3 engine problem


Sounds like the idle bypass valve is nfg. Try checking engine codes first. Try this link, you'll find it helpful. http://autorepair.about.com/od/troubleshooting/a/OBD_codes.htm . If you need to know how to check the codes, ask back here, I'll explain. Hope this helps.

Jan 03, 2009 | 1997 Ford Ranger SuperCab

3 Answers

Stuck in 5th gear


try bleeding your clutch

Aug 19, 2008 | 1991 Ford Ranger Supercab

Not finding what you are looking for?
1995 Ford Ranger Supercab Logo

Related Topics:

213 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

fordexpert

Level 3 Expert

5495 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...