Question about 2001 Mitsubishi Montero Sport 4WD

Open Question

How to replace the hub assembly on a 2001 montero limited on the front right .

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
AutoDoc
  • 169 Answers

SOURCE: '02 Front Hub assembly

You will need a hub puller. Ford # D93P-1175-B. The flate rate is for one hour.

Posted on Aug 25, 2008

Ad
michigan man
  • 3533 Answers

SOURCE: How to replace front wheel bearings on a 2001 Ford Escape 4X4

try "autozone.com" or your local library for diagrams and step by step instructions

Posted on Mar 08, 2009

  • 333 Answers

SOURCE: Replacing front wheel hub assembly on 2006

Caliper mount bolts are 74 ft/lbs
Driveshaft axle nut is 177 ft/lbs
Hub and bearing mounting bolts are 133 ft/lbs

Posted on Sep 10, 2009

Testimonial: "The info on the torgue specs was very helpful. I couldn't find it anywhere. Thanks a bunch!"

techbuster
  • 5081 Answers

SOURCE: 2001 ram 2500 how to remove the wheel hub assembly

Remove tire. Remove caliper and caliper holder. Remove rotor. Using a 36 MM socket remove center nut and slide hub off spindle. If hub does not come off freely use wheel puller to remove hub.Loosen front wheel lug nuts. Jack up and support front of truck with jack stands ( put them in the middle so both you can get to both sides of the truck). Remove tire, Remove caliper and caliper holder. romove rotor ( I had to use a 2x4 wedged between rotor and lower controll arm rubber stoper. then started truck and turned the wheel right or left to pop rotor free). remove 3 bolts that hold hub to knuckle. on the next step I used a steel pipe about 1 1/2 foot i think about 2 inches in diamater. wedge it between lower controll arm rubber stoper. then start truck turn the wheel left or right to let power steering pump do the work. It poped it off easy for me both sides in less than 1 hour. put alot of anti seize on the new hubs and bolts in case you have to replace them again. use a torque wrench to tighten all bolts. Great time to replace brakes as long as you are in the area. hope this helps.

Posted on Oct 11, 2009

  • 1 Answer

SOURCE: 2001 Mitsubishi Montero Limited. 122k miles.

2003 Mitsubishi Montero Limited. 97k miles. Temp gauge is erratic when actual temp is normal. How do I fix this?

Posted on Dec 31, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How to replace front bearings on 2001 mitsubishi montero sport?


Have them replaced

Go to You Tube Video & watch how

Do both sides

I would got to a local shop that has been there for
20 years,not a franchise

Jul 26, 2014 | 2001 Mitsubishi Montero Sport 4WD

1 Answer

Left front wheel bearing replacement diagram


Removal & Installation Front To Remove:
The front wheel bearings are not serviced separately. If the front wheel bearings are defective, the hub and bearing assembly must be replaced.
  1. Before servicing the vehicle, refer to the precautions in the beginning of this section.
  2. Lubricate the threads on the halfshaft with clean engine oil.
  3. Remove or disconnect the following:
    • Front wheels
    • Halfshaft hub nut
    • Caliper from the steering knuckle WARNING
      DO NOT allow the brake hose to support the weight of the caliper.
    • Brake rotor
    • Anti-lock Brake System (ABS) sensor from the backing plate
    • Hub and bearing assembly from the backing plate
    • Hub and bearing assembly from the halfshaft
    • Hub and bearing assembly
To Install:
Exploded view of the front hub mounting and related components 7922xg36.gif

  1. Install or connect the following:
    • Hub and bearing assembly onto the halfshaft
    • Hub and bearing assembly to the backing plate. Torque the 3 bolts alternately and evenly to 70 ft. lbs. (95 Nm).
    • ABS sensor
    • Brake rotor
    • Caliper on the steering knuckle.
    • Halfshaft nut. Torque it to 118 ft. lbs. (160 Nm).
    • Front wheel. Torque the nuts to 100 ft. lbs. (140 Nm).

Oct 18, 2010 | 2001 Oldsmobile Aurora

3 Answers

I hear a noice in front like grinding noise


sounds like you need to take it for repairs though it may be dangerous to take into fast moving traffic, maybe get a mobile mechanic to look at it ,normally it will be brake fault so be careful

Feb 28, 2010 | 2001 Mitsubishi Montero

3 Answers

2001 Mitsubishi Montero Limited. 122k miles.


2003 Mitsubishi Montero Limited. 97k miles. Temp gauge is erratic when actual temp is normal. How do I fix this?

Nov 13, 2009 | 2001 Mitsubishi Montero

2 Answers

2001 ram 2500 how to remove the wheel hub assembly


Remove tire. Remove caliper and caliper holder. Remove rotor. Using a 36 MM socket remove center nut and slide hub off spindle. If hub does not come off freely use wheel puller to remove hub.Loosen front wheel lug nuts. Jack up and support front of truck with jack stands ( put them in the middle so both you can get to both sides of the truck). Remove tire, Remove caliper and caliper holder. romove rotor ( I had to use a 2x4 wedged between rotor and lower controll arm rubber stoper. then started truck and turned the wheel right or left to pop rotor free). remove 3 bolts that hold hub to knuckle. on the next step I used a steel pipe about 1 1/2 foot i think about 2 inches in diamater. wedge it between lower controll arm rubber stoper. then start truck turn the wheel left or right to let power steering pump do the work. It poped it off easy for me both sides in less than 1 hour. put alot of anti seize on the new hubs and bolts in case you have to replace them again. use a torque wrench to tighten all bolts. Great time to replace brakes as long as you are in the area. hope this helps.

Oct 11, 2009 | 2001 Dodge Ram 2500 Truck

2 Answers

Where wheel speed sensor is located on 2001 pontiac grand am se


2001 Pontiac Grand Am 2.4L SFI DOHC 4cyl

Vehicle Speed Sensor - Location:
The speed sensors are built right into the wheel bearings of your vehicle, at the front and rear locations. They work both with the anti-lock brakes and with the traction control systems on the vehicle.

Removal & Installation
Front
The front wheel speed sensor is part of the hub/bearing assembly. Refer to Wheel Hub and Bearing Replacement in Front Suspension for service procedures.
Rear
The rear wheel speed sensor is part of the hub/bearing assembly. Refer to Wheel Hub and Bearing Replacement in Rear Suspension for service procedures.

I hope help you with this (remember rated this help) Have a nice day, good luck.

Sep 23, 2009 | 2001 Pontiac Grand Am SE

2 Answers

How do i change wheel speed sensor on a 2001 grand am se


2001 Pontiac Grand Am 2.4L SFI DOHC 4cyl

Vehicle Speed Sensor - Location:
The speed sensors are built right into the wheel bearings of your vehicle, at the front and rear locations. They work both with the anti-lock brakes and with the traction control systems on the vehicle.

Removal & Installation
Front
The front wheel speed sensor is part of the hub/bearing assembly. Refer to Wheel Hub and Bearing Replacement in Front Suspension for service procedures.
Rear
The rear wheel speed sensor is part of the hub/bearing assembly. Refer to Wheel Hub and Bearing Replacement in Rear Suspension for service procedures.

I hope help you with this (remember rated this help) Have a nice day, good luck.

Sep 23, 2009 | 2001 Pontiac Grand Am SE

1 Answer

2001 montero/ rumbling noise in front


There are a few things that this could be, and I see that you have replaced a few of the items that it could be but steering systems are a weird thing so here ya go:

  1. Excessive inner CV joint angle
  2. Sticking inboard joint assembly
  3. Lack of lube at the ball joints
  4. Loose upper strut mount
  5. Worn tie rods
  6. Loose stabilizer bar
  7. Loose suspension bolts
  8. And, believe it or not, a blister or bump on the tire
If you got a Chilton's or Haynes manual to do this job, it states in there how much grease should be packed into the bearings. Also, making sure of the length of your CV axle.

Post more info you would like, to pass on.

Mar 17, 2009 | 2007 Mitsubishi Montero Limited

1 Answer

How to replace front wheel bearings on 2001 mitsubisih mirage


this is not really a DIY job,you will need some special tools to remove the bearing and refit the new one.If you know enough to remove the hub assembly then i will explain how to remove the bearing and fit the new one,failing which remove the hub assembly and take it to a local engineers/re-conditioners to have the bearing pressed in and out

Feb 28, 2009 | 2001 Mitsubishi Mirage

2 Answers

Replace front wheel bearings 1998 lancer


how do i remove the front wheel bearing hub assembly?

Aug 14, 2008 | 2001 Mitsubishi Montero

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

190 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8499 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...