Question about 1995 Chevrolet Monte Carlo

Open Question

Need to know how to remove oil pan for Monte Carlo 3.1 liter

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 6 Answers

SOURCE: need to replace alternator on 1998 chevrolet monte carlo

Nope, it has two bolts one towards the front and one at the back underneath. Be careful of the one in the back as the nut is tricky to get on. You don't need to remove the bracket.

Posted on Feb 18, 2009

Ad
  • 41 Answers

SOURCE: multiple misfire 95 monte carlo 3.1 liter

check codes first. But sounds like crank position sensor mine does it all the time

Posted on Apr 25, 2009

  • 6982 Answers

SOURCE: replac 2003 monte carlo oil pan gasket

To remove the oil pan on any vehicle, first remove anything obviously in your way...starter, exhaust pipe etc. Then disconnect the engine mounts and raise engine to gain sufficient clearance between frame and pan. You cannot support the engine from under the pan so either use a fixture above the engine or put blocks between mounts and engine to support it. After all rail bolts have been removed, remember that the oil pump pickup will interfere with removal somewhat but pan can be maneuvered around it. Anything preventing you from getting the pan out will then need to be removed or moved as they are identified. Be careful when raising the engine that you do not break anything above it as it comes up.

Posted on Jun 09, 2009

  • 141 Answers

SOURCE: remove the power steering pump pulley on a 2003 monte carlo

you can either remove the steering pump to gain access,if there is no holes in PS pump pulley,you can rent a pulley puller....can be a ***** to get in and use them though....I will drill a hole in it for next time whenever I replace a pump on cars without ....

Posted on Aug 09, 2009

  • 462 Answers

SOURCE: OIL PAN GASKET LEAK

The engine has to be supported and the cradle under the engine has to be removed. After everything is reinstalled the front end has to be realigned.

Posted on Sep 13, 2009

Testimonial: "Thanks for your help, but i think i need a little more info. before tring this."

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i replace oil pump on 01 monte carlo ss


If the oil pan will clear the steering components without jacking up the engine then drop the pan and unbolt the oil pump. You'll need to get a new pan gasket for the oil pan too.

Sep 25, 2014 | 2001 Chevrolet Monte Carlo

1 Answer

How do iremove oil pan 01 montecarlo


OIL PAN
Removal & Installation
1. Disconnect negative battery cable. Remove engine torque strut. Raise and support vehicle. Drain
crankcase. Disconnect oil level sensor electrical connector. Remove oil level sensor and oil filter.
Disconnect front exhaust pipe from manifold. Remove right front wheel and splash shield.
2. Disconnect oil cooler pipes. Disconnect A/C compressor electrical connector. Remove A/C compressor,
and position aside. Disconnect engine mounts from frame.
3. Remove flexplate access cover. Use transmission jack at transaxle to raise engine. Remove oil pan bolts
and oil pan. To install, reverse removal procedure. Install oil level sensor after oil pan is installed. Tighten
retaining bolts to specification. See TORQUE SPECIFICATIONS.

Sep 25, 2014 | 2001 Chevrolet Monte Carlo

2 Answers

We have a 1996 3.1 monte carlo ls we need to replace the crankshaft senor but we cant find it on the motor is there a picture of where one could be


The crankshaft position sensor is a two pin sensor made up of plastic like material. It is located on the back side of the engine block about half way between the oil pan and the top of the block. It can only be accessed by crawling under the car. 33899bbd-15f1-451a-9a7a-a94f8be62e27.png

May 07, 2014 | 1996 Chevrolet Monte Carlo

1 Answer

Install timing chain 1999 monte carlo


you need to buy haynes repair manual it will show you the camshaft sprocket and crankshaft sprocket timing marks and manual will show and tell you how to remove timing chain.you need lots of tool and a engine light support engine you have to remove oil pan so bottom part timing cover will seal correctly if you dont remove oil pan bottom timing cover seal will be in a bind you will have oil leak.

Aug 19, 2012 | 1999 Chevrolet Monte Carlo

1 Answer

My car is leaking oil, it is from the basepan. Is


By basepan, do you mean the oil pan? The 3800 engine in your monte has problems with the pan gasket leaking, or the pan itself rotting. You can do it yourself, but it requires either lifting the engine up about 6 inches, or dropping the cradle.

If you can do that, then yes, you can change it yourself, otherwise, you will need to take it to the shop. I've done 3 of them and it is a pain. Unless you're really into being a mechanic, take it somewhere.

Apr 09, 2010 | 2000 Chevrolet Monte Carlo

1 Answer

OIL PAN GASKET LEAK


The engine has to be supported and the cradle under the engine has to be removed. After everything is reinstalled the front end has to be realigned.

Sep 13, 2009 | 2002 Chevrolet Monte Carlo

3 Answers

How to cange and oil pan gasket on a 87 monte carlo


The oil pan is at the bottom of the engine. You might have the exhaust in the way, in which case you need a helper so that you can remove the exhast from the engine and take the entire pipe from the vehicle. From there, make sure you drain all the old oil from the engine and pan. Unthread all the bolts that surround the old oil pan gasket (you may have to remove the starter motor to gain access to a few bolts). Lower the pan carefully off the engine block (the oil pump and oil filter screen are within the oil pan. You want to make sure not to damage these componets or the baffle inside the oil pan). Your new gasket may have four retainers-especially if it's a Felpro gasket. These retainers go into the corners of the engine block mating surface for the oil pan. Slide your gasket up onto the retainers and engine block, then put your oil pan onto it (the retainers will hold it loosely in place. Put all the bolts but the four corners into the engine block. Remove the retainers and replace the bolts. Reconnect the exhaust pipe. Fill engine with oil, run, and check for leaks.

Jul 03, 2009 | 1987 Chevrolet Monte Carlo

1 Answer

Replac 2003 monte carlo oil pan gasket


To remove the oil pan on any vehicle, first remove anything obviously in your way...starter, exhaust pipe etc. Then disconnect the engine mounts and raise engine to gain sufficient clearance between frame and pan. You cannot support the engine from under the pan so either use a fixture above the engine or put blocks between mounts and engine to support it. After all rail bolts have been removed, remember that the oil pump pickup will interfere with removal somewhat but pan can be maneuvered around it. Anything preventing you from getting the pan out will then need to be removed or moved as they are identified. Be careful when raising the engine that you do not break anything above it as it comes up.

Jun 09, 2009 | 2003 Chevrolet Monte Carlo

1 Answer

Oil pan


You dont need to change the oil pan.Goto an auto parts store and ask for a universal drain plug.They come in a red package and the word 'HELP' on them.

Jul 19, 2008 | 2001 Chevrolet Monte Carlo

Not finding what you are looking for?
1995 Chevrolet Monte Carlo Logo

Related Topics:

205 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...