Question about 1997 Buick LeSabre

1 Answer

Need to remove the back seat for cleaning. How do you remove the seat.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Buick Master
  • 17,970 Answers

Seats - Removal & Installation
Rear
(see Figures 3, 4, 5 and 6)

  1. Push the lower forward edge of the seat cushion rearward.
  2. Lift upward and pull forward on the seat cushion frame to disengage the cushion frame wires from the retainers on the rear seat pan.
Need to remove the back seat for cleaning. How do - e092b01.jpg

Fig. 3: Pull up on the rear of the lower seat cushion to disengage it from the retainers

128803b.jpg

Fig. 4: The rear seat cushion guide hook (1) must be disengaged from the retaining latch (2)
  1. Remove the lower seat cushion from the vehicle by disengaging the guide hood from the retaining latch.
  2. At the bottom of the seatback, remove the anchor bolts securing Need to remove the back seat for cleaning. How do - 25e3a4d.jpgp belts.
25e3a4d.jpg

Fig. 5: Remove the anchor bolts/nuts holding the lap belts
  1. Grasp the bottom of the seatback and swing it forward to disengage the offsets on the upper frame bar from the hangers.
  2. Lift the seatback upward and remove it from the vehicle.
0a64826.jpg

Fig. 6: Pull the bottom of the seat back up to unhook the retainers, then lift the seat back up and remove it from the vehicle
  1. Installation is the reverse of the removal procedure. Tighten the bolts to 31 ft. lbs. (42 Nm).

Hope helps.

Posted on Aug 26, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to remove back seat?


In most cases you press down on seat while pushing the whole thing towards the back and the whole seat comes loose from anchors that hold it down. Then you lift it out as one piece.

Oct 05, 2015 | Cars & Trucks

1 Answer

Need to remove backseat of 2003 cavalier in order to clean it...puppy **** on seat. Do you have other solutions to removing the odor?


I had to pull my 2001 cavalier back seat. (MILK) The clips that held it down where located in the front side of the seat. One on driver, one passenger. You actually have to push the seat (from the front) back toward the trunk and lift up. I tried pulling straight up and ended up breaking a clip. THEN i saw how i should have done it. It will probably take alot of force. They fit tight and were made to stay there. You never know, i just pulled my girlfriends 2001 impala seat, (CAT PEE) and it pulled straight up with barely any effort.

Jun 08, 2011 | 2003 Chevrolet Cavalier

1 Answer

How to remove bottom of back seat need to remove seat to remove rear shocks..


PUSH IN CENTER FRONT EDGE CUSHION TO DISENGAGE PART OF SEATS WIRE FRAME FROM CLIPS.WITH CLIPS UNHOOKED LIFT UP AND REMOVE SEAT.IF REAR SEAT NOT HELD IN PLACE WITH CLIPS. LIFT UP THE REAR SEAT CUSHION AND PIVOT IT FORWARD. DETACH THE RETAINING BOLTS AT THE LOWER EDGE OF THE SEAT BACK AND IF NECESSARY REMOVE THE SEAT BELT ANCHOR BOLTS.LIFT UP ON SEAT BACK REMOVE IT..

Feb 06, 2011 | Jaguar X-Type Cars & Trucks

2 Answers

Seat will move up and down but not forward and


There are cables that run the seat up down forward and back. It sounds like the cable has broke for the foward or back adjustment. They are hard to get to I know unless the seat is removed to check

Apr 18, 2010 | 1995 Jeep Grand Cherokee

1 Answer

How do you remove the passenger seat in a lexus gx470? My son spilled red fruit punch on the floor and I need to pull the seat out to clean the carpet. I'm mechanical, but worried about the electronics in...


Disconnect all the plugs connecting the power seat to the wiring loom carefully,its straight foward,then remove the 4 bolts holding the seat in.Once the seat has been removed you can clean it and maybe if you feel the need to remove the electric motors but you shouldnt need to even with a big clean they shouldnt get wet,even when a car is detailed and steam cleaned inside electric seats are fine

Nov 09, 2009 | 2007 Lexus GX470

1 Answer

How do I remove the back seat of my 2009 pontiac vibe? I spilt milk and it went down between the seats and I know it will smell if I don;t get it cleaned properly.


move front seats forward.grasp seat cushion under front[where your heels would be if seated] and lift to release seat from 'clips' underneath.pull seat towards you to remove.push it back in firmly before pushing down to 're-clip'.

Oct 11, 2009 | 2009 Pontiac Vibe

2 Answers

2003 Toyota Camry drivers side power seat stuck


This is not necessary...as many have stated...use a hammer with switch in reverse position. Hammer the seat back...it will catch...

Aug 25, 2009 | 1992 Toyota Camry V6

1 Answer

Mustang rear seat removal?


please rate highly if this is what you need

Section 01-10: Seats and Tracks 1994 Mustang. Workshop Manual
REMOVAL AND INSTALLATION Seat Cushion, Rear Removal and Installation
  1. Release pin from locks by pressing release button under rear seat cushion.
  1. Pull rear safety belt and buckle (60044) through openings in rear seat cushion pad and frame (600A88) and remove rear seat cushion pad and frame .
  1. To install, reverse Removal procedure.
----------------------------------------------
Section 01-10: Seats and Tracks 1994 Mustang. Workshop Manual
REMOVAL AND INSTALLATION Seat Back, Rear Sedan
Removal
  1. Remove rear seat cushion as outlined.
  1. Remove rear seat bolster. Refer to Section 01-05 .

  1. Remove rear seat bolster mounting bolts. Remove bolster assembly.
  2. Remove four seat back to package tray retaining bolts.
  1. Remove seat back.
  1. To install, reverse Removal procedure.

May 04, 2009 | 2004 Ford Mustang

1 Answer

Eed to remove front seat on 2002 trail blazer to clean underneth


slide seat back remove 2 bolts on floor .slide seat all the way foreard remove 2 bolts

Oct 19, 2008 | 2002 Chevrolet TrailBlazer

1 Answer

Honda Accord brake light removal


It's a lot of work for just cleaning.
Fold the rear seat down and remove the two 12mm bolts on the bottom corners of the seat back, pull the seat out.
Between the seat bottom and the carpet you will find two tabs you need to pull and then pull the seat bottom up and out of the car.
Remove the two 10mm bolts securing the seat bolsters to the area the seat bottom was covering. Pull the seat bolsters up and out of the car.
Pop the "C" pillar trim off of the car (above the parcel shelf and beside the rear glass) (side airbag vehicles have a slightly different procedure.)
Pull up on the parcel shelf carefully and evenly. Remove clean and put everything back together.

Aug 16, 2008 | 2005 Honda Accord

Not finding what you are looking for?
1997 Buick LeSabre Logo

Related Topics:

269 people viewed this question

Ask a Question

Usually answered in minutes!

Top Buick Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6918 Answers

Are you a Buick Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...