Question about 1992 Ford Crown Victoria

1 Answer

How do I change my wiper blades on my '92 Crown Vic? Do I have to change the whole wiper arm?

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 220 Answers

Most auto parts stores will gladly change out the blades for you. As far as your question.......No, you only have to replace the blades and not the completer wiper arm.
Hope this helps

Posted on Aug 26, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1996 crown vic- drivers side wiper arm loose, blade will not lay flat when cleaning


Sometimes you need to bend the arm to put more pressure on the glass.

Mar 29, 2014 | 1996 Ford Crown Victoria

1 Answer

Where is the wiper motor on a 2005 crown vic


The wiper motor is under the black plastic cowling below the wiper arms.

Sep 13, 2011 | 2005 Ford Crown Victoria

1 Answer

2002 ford crown vic. driver side wiper not working? passenger side works


the linkage between the wiper motor and the wiper arms needs to be replaced. the stud on the one side is stripped and that is why it doesn't work as it should. this happens usually when the wipers are left on in the winter with the blades freezing to the windsheild. turn on the car with frozen blades tends to strip out the teeth holding the wiper arms onto the linkage

Jun 09, 2010 | 2002 Ford Crown Victoria

2 Answers

The windshield wiper on driver's side always misses a spot even when replaced


There may not be enough pressure on the wiper arm to press the blade onto the glass. Or, if you have been replacing the blade only, replace the entire cartridge and blade.

Check the spring tension on the wiper arm as well and the shoulder pin connecting it to the wiper motor to see if it is loose. If it is much looser than the passenger side, then put in a new wiper arm assembly. If it is not loose, check to see if it is bent...then you may just be able to get away with bending it back into position.

Jan 01, 2010 | 1993 Ford Crown Victoria

1 Answer

How to remove wiper arm 96 crown vic


WHERE THE WIPER ARM AND SHAFT COME TOGHER THERE IS A LEVER LIFT UP THE WIPER SO THAT IT IS POINTING AT THE SLY AND PRY OUT THE LOCK AT THE BASE OF THE WIPER ARM .

Sep 12, 2009 | 1996 Ford Crown Victoria

1 Answer

How do I replace the right transmission arm from wiper motor 92 R


see if you have a nut on the top of the wiper are that has stripped off. there are splines that hold them on and the arms are both connected to each other. you would need replace the whole assembly that connects to the motor.

Sep 03, 2009 | 1992 Ford Ranger

2 Answers

Wiper motor replacement for a 99 crown vic


I replaced the same part on a 1994 Crown Vic. There are a few bolts which go through rubber mounts on the firewall and that is how the wiper motor fits against the firewall. There is a clip on the wiper drive that must be pressed and slid off the wiper shaft. The hardest part was getting clearence between the engine and wiper motor. If I remember there was a way to turn the wiper case to clear the engine. I have asked myself why this was engineered like this? There is nothing important in the way that 3/4" of clearance could have been given for removal.

May 06, 2009 | 1999 Ford Crown Victoria

1 Answer

Wipers will not park on 93 ford crown victoria


Hmmmm... if you replaced the motor you must have cleaned the area housing the arm mechanism. I had the same problem and found the problem to be in the arm assembly box on the firewall. Under the hood, triangular shaped box with snap on top was full of dirt, leaves and pine needles... I removed all the **** & my wipers now park as they should!!

Mar 14, 2009 | 1993 Ford Crown Victoria

1 Answer

Wipers


It's probably going to be the switch arm itself.

The part is a bit pricey, but it does come with the wiring diagram to place the new one in there.

The switch is the whole thing, turn signal, wipers, etc, and the arm.

Dec 20, 2008 | 1999 Ford Crown Victoria

1 Answer

Need to replace wiper blades on 83 Crown Vic, Country Squire


Most parts houses will install them for free.Go to autozone advanced or somebody like that and yes the dealer normally charges to do that

Oct 20, 2008 | 1983 Ford Crown Victoria

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

252 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76673 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

fordexpert

Level 3 Expert

5537 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...