Question about BMW 328

1 Answer

Wher do the 4 hoses in the back of the engine go 1 of mine blew

Posted by on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 20 achievements.


    An expert that got 10 achievements.


    An expert that got 5 achievements.

  • BMW Master
  • 2,019 Answers

There are vacuum hoses, heater hoses, oil cooler hoses, etc., at the back of the engine. So you would have to tell us. There is no way we can guess. But if it is leaking coolant, it does not make any difference what it goes to. You simply follow it to the ends, remove and replace it, and then top up the coolant again.

Posted on Aug 26, 2010


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

2 Answers

Wher is thermostat on 2005 Kia sedona

The upper rad hose will connect to the t-stat housing and the radiator

Jul 30, 2015 | Kia Cars & Trucks

1 Answer

Wher is the thermostate on a nissan frontier 2007 frontier 4 cyl

follow the upper radiator hose back to the motor,it is inside that metal thing that is bolted to the motor and connected to the hose

May 09, 2015 | Nissan Frontier Cars & Trucks

1 Answer

How do i unclog passenger side sunroof drain on 2002 monte carlo ss?

The way I did it was I used an air hose and blew out the trash

Apr 30, 2014 | 2006 Saturn Vue

1 Answer

Where is bleeder on Vw-Audi 4 cyl-1800 engine

get a pressure test on radiator via a radiator cap that has a pressure gauge with the engine running . The head gasket is probably blown on the engine and this can cause exhaust pressure to go into the cooling system and create this symptom you are experiencing.
you may also have more expensive problems like a warped head or cracked head . $$$$$ - remachining or welding and remachining of engine head and a blown gasket .

Sep 04, 2017 | 1999 Pontiac Montana

1 Answer

Antifrezz is leaking from the engine no hoses are broke whers is it coming from

If all your hose and hose clamps are good. There is a good chance that the water pump has to be replaced, once the water pump bearing is worn. The coolant will leak from the weep hole on the water pump when the engine is running and the only way to stop the leak is to replace the water pump.
Thank you for using fixya.
Depending on engine size a 3.1 liter v6 and a 2.2 **** 4cyl. are both located in the front of the engine.
Remove serpentine belt,remove 4 10mm from pulley (v6)(three 13mm for 4cyl.)remove pulley.v6 will have 6 8mm bolts,4cyl. will have 4 13mm bolts-remove clean surfaces install new pump.
About 40 mins.v6,60mins for 4cyl. Be sure to drain coolant before you start, refill whith proper coolant, some 95 up gm require dexcool anti freeze (orange in color).

Apr 16, 2010 | 1995 Oldsmobile Cutlass Supreme

3 Answers

1998 ford expedition misses, ,shudders, replace spark plugs 6 months ago, and 2 COP's. #4 misfires again!!

The coil is not seated correct or it has become bad also. These have a tendency to mess up on a regular basis. I use a di-electric grease on mine to help it from misfiring. I would take that #4 back off and re-seat it and see how it performs.

Apr 04, 2010 | 1998 Ford Expedition

1 Answer

Where is the location of the thermostat on a 2004 stratus

On the 4 cylinders it is wher ethe upper hose hooks to the engine.
On the 2.5L v6 it is where the lower radiator hose hooks to the engine.

Nov 18, 2009 | 2004 Dodge Stratus

2 Answers

My 2002 Ford Explorer upper hose blew off while on highway. immediately exited and seen the hose. re-attatched hose, put water in truck and not it will not turn over. mechanic shop tested wires and no...

Does your engine turn over?When you say your upper hose blew off To me it meant your engine ran hot.You put the hose back on and filled the truck with water.So you drove it to the shop?Did you have to tow the truck after this happened?I don' know what to say! It seems like you have a blown head gasket,or you blew your engine,I need more info to help you.

Jul 23, 2009 | 2005 Ford Explorer

1 Answer

01 Accent AC problems

1. Discharge/Recover the refrigerant. 2. Remove the tension bolt. a4c16f6.jpg 3. Remove the V-belt and magnetic clutch wire harness connector.
4. Remove the suction hose and discharge hose from the compressor. 5. Remove the 4 mounting bolts on the compressor.
3bb9fac.jpg 6. Remove the compressor downwards.

1. Tighten the 4 compressor mounting bolts.
2. Connect the suction hose and discharge hose to the compressor. 3. Connect the V belt. 4. Adjust the V belt tension.5. Reconnect the magnetic clutch wire harness connector.

Jun 04, 2009 | 2001 Hyundai Accent

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

49 people viewed this question

Ask a Question

Usually answered in minutes!

Top BMW Experts

Frankie B

Level 2 Expert

65 Answers

Fred Sops

Level 2 Expert

272 Answers


Level 2 Expert

254 Answers

Are you a BMW Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides