Question about 2002 Suzuki Grand Vitara

1 Answer

How to change fornt drivers wheel bearing on grand vitara 2002 model 2.0 ltr 5 door and where can i get a repair manual for this model

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Suzuki Master
  • 6,826 Answers

REMOVAL & INSTALLATION

  1. Before servicing the vehicle, refer to the precautions in the beginning of this section.
  2. Remove or disconnect the following:
    • Front wheel
    • Brake caliper and rotor
    • Locking hub or hub drive flange, if equipped
    • Hub grease cap, if equipped
    • Wheel speed sensor, if equipped
    • Wheel bearing lockwasher
    • Wheel bearing locknut and inner washer
    • Wheel hub and bearing assembly
    • Wheel hub oil seal
    • Wheel bearing oil seal
    • Snapring
  3. Press the wheel bearing and race out of the hub. To install:
  4. Press the wheel bearing and race into the hub so that the race is fully seated in the hub bore.
  5. Install or connect the following:
    • Snapring
    • Wheel bearing oil seal
    • Wheel hub oil seal
    • Wheel hub and bearing assembly
    • Wheel bearing locknut and inner washer. Tighten the nut to 157 ft. lbs. (216 Nm).
    • Wheel bearing lockwasher. Tighten the retaining screws to 13 inch lbs. (1.5 Nm).
    • Wheel speed sensor, if equipped
    • Hub grease cap, if equipped
    • Locking hub or hub drive flange, if equipped
    • Brake caliper and rotor
    • Front wheel
how to change fornt drivers wheel bearing on grand - prev.gif next.gif --- Go to your local auto parts store or library to get a copy of the repair manual for this model.

Posted on Aug 26, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

There is a noise coming from the rear end of my 2006 suzuki grand vitara


Hi, The Suzuki Grand Vitara is a superb vehicle, several reasons can be applied to rear end noise.

Most are not expensive or difficult to repair. However a few can be expensive.
Lets look at the most common, wheel bearings, are the usual component to wear and require replacement, if it is a wheel bearing, its much better to have both wheel bearings replaced.

A wheel bearing will become noisy at certain speeds and give of a distinctive noise, best noticed on a flat road.
However a repair shop can easy diagnose a wheel bearing for you.
Other problems could be found within the differential back axle, this can again be easily diagnosed by the engineer looking for a wheel bearing fault.

I hope this proves to be helpful

Adam

Jan 14, 2018 | Suzuki Cars & Trucks

1 Answer

How to replace a rear wheel bearing on a suzuki grand vitara 2004


Here is a website that a free manual can be down loaded for your vehicle


http://ezinearticles.com/?Find-the-Free-Auto-Repair-Manual-You-Need-Online&id=92717

May 01, 2010 | 2004 Suzuki Grand Vitara

1 Answer

Remote locking New Grand Vitara. Can I change


Hi.
There is no way of changing 2 press into 1 press. For unlocking all doors - press the remote 2 times.

Feb 10, 2010 | 2007 Suzuki Grand Vitara 4WD

1 Answer

Central locking fob


Programming
When
Remote control buttons operated repeatedly while vehicle out of range and system becomes inoperative. System malfunction.
How
Ensure ignition switched OFF and all doors closed. Proceed as follows: Within 10 seconds, open driver's door and switch ignition ON. Within 10 seconds of switching ignition ON, switch ignition OFF. Within 20 seconds of switching ignition OFF, press and release driver's door contact switch 3 times. Within 10 seconds of releasing driver's door contact switch, switch ignition ON then OFF. Within 20 seconds of switching ignition OFF, press and hold both remote control buttons in turn for at least 5 seconds. The driver's door should lock and unlock once. Within 5 seconds of driver's door locking/unlocking, press remote control lock button Fig. 1 [1] or unlock button [2]. Programming procedure complete. Confirm programming has been successful by locking and unlocking vehicle.
NOTE: A maximum of 2 remote controls can be programmed.

Feb 05, 2010 | 2002 Suzuki Grand Vitara

1 Answer

Repair rear wheel bearing 2004 suzuki grand vitara do i need to pull the axle to remove and replace


I have never changed it by myself.

Just trying to help you during X mass period please consult the following internet site and see if you 'recognise your installation.

www.izook.com/tech/samurai/drivetrain/rearaxlebrg.htm

Sorry If can't do more over
Dan

Dec 28, 2009 | 2004 Suzuki Grand Vitara

1 Answer

Bearing noise from front wheels ; 2002 Suzuki Grand Vitara


these are seal bearing and they need to be press out and press back in this need to be done with a hydralic press not with harmer i can help if yopu are in the nyc are call me 718-821-1640

Jun 09, 2009 | 2002 Suzuki Grand Vitara

2 Answers

1999 Suzuki Grand Vitara Vibrate/shake at 55-70 mph


Lift the back of your car.With a stable rest and with the two hind wheels hanging, run your car up to the speed where you experienced vibration. have someone take care of the throttle and shifting while you observe the transmission shaft. You may have an imbalanced shaft.

May 12, 2009 | 1999 Suzuki Grand Vitara

1 Answer

Reprogram remote


xl-7 programming instructions first you need to stuff your head up under the dash and locate your module drivers side upper corner under dash does it say programmable transmitter (the first models had no programable modules) if it says that then......
1 confirm all doors are shut and key is out of ignition
2 open drivers door insert key and turn to on within 10 sec
3 turn ignition switch to off in 10 sec
4 push and release drivers door switch 3 times in 20 sec
5 turn ign. switch to on in 10 sec
6 turn ign. switch to off in 10 sec
7 press and hold lock and unlock button on transmitter for 5 sec within 20 sec of step 6 alldoors will lock/unlockto confirm correct process
8 press lock unlock buttons on second remote within 5 sec after step 7 once again all doors will lock/unlock to confirm
9 to add another remote up to a max of four repeat steps 1 through 8 this was taken directly out of an owners manual supplement that comes with a new keyless entry kit (part number for a xl-7 or grand vitara can't remember which one it goes to but it works on either one is 84900-67810) which you would have to purchase if yours is not programable these instructions are the same for vitara, grand vitara, xl-7 and the esteem hope this helps

Jul 05, 2008 | 2002 Suzuki Grand Vitara

Not finding what you are looking for?
2002 Suzuki Grand Vitara Logo

Related Topics:

1,689 people viewed this question

Ask a Question

Usually answered in minutes!

Top Suzuki Experts

yadayada
yadayada

Level 3 Expert

78257 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Boyet Soriano
Boyet Soriano

Level 2 Expert

293 Answers

Are you a Suzuki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...