Question about 1998 Isuzu Rodeo

2 Answers

1998 5 speed v-6 will not go ovr 70mph no matter what i try... tach is redlines no hesitation or missing noted...why could this be?

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,565 Answers

Clutch is slipping

Posted on Aug 26, 2010

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Guru:

    An expert who has written 7 tips or uploaded 3 video tips

  • Master
  • 630 Answers

You have either a worn clutch disc,worn pressure plate, heat cracked flywheel, due to an oil leak or slipping out of adjustment or worn out clutch assembly. Don't forget to replace the pilot bushing also when replacing the clutch and throw out bearing assembly.
if you have a hydraulic clutch check the fluid level in the master, observe the system for leaks and repair as needed.
Good luck.

Posted on Sep 01, 2010

  • JOHN DAVIDSON Sep 02, 2010

    I haven't heard from you nor have I recieved a rating from you and was wondering if you were satisfied with the respnse i gave you on this crucial issue?

    Hope all is well....Have Fun!!!

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why has the revs dial in my peugeot 306 started goin to 40/50 when it never goes past 30?


are you talking about you tach gauge , maybe because it is not working right , if you push the accelarator does it go up and down ,if not it needs replaced or just do not worry about it not nessary anyhow unless you are racing it and want to watch the tach so you do not redline it which is uaslly around 6 thousand and up , depending on a number of factors

Oct 21, 2014 | Peugeot 306 Cars & Trucks

1 Answer

Why does my 1995 nissan pick up lose power and speed on uphill inclines?


If you keep the RPMS (tach) up to 3000 and above (DONT REDLINE YOU'LL BLOW YER MOTOR UP!) At 3000 RPM to 3500 -4000 RPM is where these motors posses what i figure is a power band that handles most inclines. Down shifting included. DRIVE SAFE

Jun 24, 2014 | 1995 Nissan Pickup

1 Answer

My 98 tacoma is hesitating and sputtering


Check the egr valve and its related components in that circuit.

Feb 11, 2013 | 1998 Toyota Tacoma

1 Answer

My 91 f350 sometimes dies wile stoped it has new lift pump an injuctor pump an filter


ON MY 91 DID THE SAME THEIR WAS A INLINE FILTER CHANGED AND NEVER DIED AGIN

Dec 22, 2011 | 1991 Ford F350

1 Answer

Engine will rev. No drop in speed, no increase in


likely what you are seeing is the first signs of slipping. If permitted to continue, likely it will get worse and you will then lose a bit of speed when it happens. In warmer weather the trans runs a bit hotter and will react to that. If you cannot hear the revs increasing but the tach says they are, it's also possible that for some reason the tach isn't reading correctly. Any good tech should be able to tell the difference. Problem I have is that I'm here and can't drive it to give you a "definite" on either.The only way to verify this yourself would be to attach an external tach to the engine and compare the rpms of the one in your dash to that one.

Sep 19, 2009 | 1998 Jeep Grand Cherokee

1 Answer

HESITATION WHEN ACCELERATING


+check plug gap adjustment ,25th ,they should be changed around 10.000 miles and if the gap is excessive then this will cause the missing and extreme cases retarded timing ,ok a knats whatsit but with modern fuel and the amount of ethanol it contains ?

Mar 23, 2017 | 1998 Toyota T100

1 Answer

98 Expedtion hesitation or miss.


throttle position sensor may be bad or need adjusted .or oxygen sensors could be faulty does it idle ruff till it warms up?or maybe map sensor

Mar 24, 2009 | 1998 Ford Expedition

1 Answer

1998 plymouth breeze


Does it hesitate no matter how far u push the gas pedal?

Aug 14, 2008 | 1997 Plymouth Breeze

Not finding what you are looking for?
1998 Isuzu Rodeo Logo

188 people viewed this question

Ask a Question

Usually answered in minutes!

Top Isuzu Experts

yadayada
yadayada

Level 3 Expert

75077 Answers

Steve Hurc
Steve Hurc

Level 3 Expert

450 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Are you an Isuzu Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...