Question about Ford E-Series

1 Answer

Timing belt broke,engine out of time,need to timing and install new belt how do i set timing.98 escort zx2 2.0 L

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Ford Master
  • 6,826 Answers

2.0L Engine SOHC ENGINE

  1. Remove the drive belt and timing cover.
  2. Raise the car and support it with safety stands.
  3. Remove the right-hand splash shield and the crankshaft pulley. Fig. 11: The timing marks on both the camshaft and crankshaft pulleys must be aligned like this before removing or installing the timing belt — 2.0L SOHC engines timing belt broke,engine out of - 90983g66.gif

  4. Align the timing marks as illustrated in the accompanying illustration.
  5. Refer to the accompanying illustration and remove the timing belt as follows:
    1. Loosen the timing belt tensioner bolt (1).
    2. Use an 8mm Allen wrench, and turn the tensioner (2) counterclockwise 1⁄4 turn.
    3. Insert a 1⁄8 inch drill bit in the hole (3) to lock the belt tensioner in place.
    4. Remove the timing belt (4). Fig. 12: Remove the timing belt by following these 4 numbered steps (refer to the text for an explanation) — 2.0L SOHC engine 90983g67.gif

    5. Inspect the belt for damage and signs of oil leakage. To install: NOTE: Install the timing belt over the sprocket in a counterclockwise direction starting at the crankshaft. Keep the belt span between the crankshaft and camshaft tight when installing the belt over the camshaft.
  6. Install the timing belt and remove the drill bit.
  7. Tighten the tensioner bolt to 15–22 ft. lbs. (20–30 Nm).
  8. Rotate the engine two complete revolutions and make sure the timing marks are aligned.
  9. Install the timing belt cover and crankshaft pulley.
  10. Install the right-hand splash shield and the drive belt.
  11. Start the car and check for proper operation.
DOHC ENGINE NOTE: A camshaft alignment timing tool (No. T94P-6256-CH or equivalent) and a crankshaft Top Dead Center (TDC) timing peg tool (No. T97P-6000-A or equivalent) are required for this procedure. NOTE: Make sure the correct notch in the pulley is indexed to the lower cylinder block. Refer to the accompanying illustration. Fig. 13: A camshaft alignment timing tool . .timing belt broke,engine out of - 90983g68.gifc="http://i.fixya.net/uploads/images/90983g68.gif" alt="90983g68.gif" class="h_mi" />
Fig. 14: . . . and a crankshaft TDC timing peg tool are required when remtiming belt broke,engine out of - 90983g69.gifstalling the timing belt 90983g69.gif
  1. Remove the spark plugs.
  2. Rotate the crankshaft to TDC.
  3. Locate and remove the plug bolt by the Crankshaft Position (CKP) sensor (refer to the illustration) and install the TDC timing peg. Fig. 15: Remove the plug bolt timing belt broke,engine out of - 90983g70.gifshaft Position (CKP) sensor and install the TDC timing peg 90983g70.gif

  4. Raise the car and support it with safety stands.
  5. Unfasten the splash shields bolts and remove the shield.
  6. Lower the car and remove the water pump pulley.
  7. Remove the valve cover and the timing belt covers.
  8. Align the camshafts and install the camshaft alignment tool on the back timing belt broke,engine out of - 90983g76.gifafts as illustrated. Fig. 16: Align the camshafts and install the alignment tool 90983g76.gif
    WARNING
    If the camshaft belt is being reused, mark the direction of the camshaft belt to the rotation of the camshaft prior to removal, or premature wear and belt failure could occur.
  9. Loosen the tensioner pulley bolt and relieve the tension on the belt by disconnecting the tensioner tab from the timing cover back plate.
  10. Slide the belt off the sprockets.
  11. Inspect the belt for wear and replace as necessary. timing belt broke,engine out of - 90983g71.gif17: Timing belt routing — 2.0L DOHC engine 90983g71.gif
    To install:
  12. If, for any reason, the engine was disturbed, the camshafts moved or the sprockets replaced, perform the following procedure: NOTE: Make sure the correct notch in the pulley is indexed to the lower cylinder block.
    1. Position the crankshaft just prior to Top Dead Center (TDC).
    2. If not already done, locate and remove the plug bolt by the Crankshaft Position (CKP) sensor (refer to the illustration) and install the TDC timing peg.
    3. Rotate the crankshaft clockwise against the TDC peg. NOTE: Installation of the alignment tool into the exhaust camshaft may require the camshafts to be rotated clockwise.
    4. Install the camshaft alignment tool on the back of the camshafts.
    5. Install the timing belt and engage the timing belt tensioner tab into the upper timing cover backplate. NOTE: A 3⁄8 inch drive, 10mm, 2 inch torque adapter offset is required to tighten the tensioner bolt.
    6. Using a 6mm Allen wrench, adjust the tensioner until the index marks are aligned and tighten the bolt to 17–20 ft. lbs. (22–28 Nm).
    7. Rotate the crankshaft clockwise against the TDC alignment peg, then remove the camshaft alignment tool.
    8. Remove the TDC peg tool and install the plug bolt.
    9. Install the timing and valve covers.
    10. Install the water pump pulley and the splash shield.
    11. Install the spark plugs. If the engine or the camshaft were not disturbed in any way, or the sprockets were not removed, perform the following procedure:
  13. Install the timing belt and engagtiming belt broke,engine out of - 90983g72.gif belt tensioner tab into the upper timing cover backplate. Fig. 18: Engage the timing belt tensioner tab into the upper timing cover backplate . . . 90983g72.gif
    Fig. 19: . . . then use a 6mm Allen wrench to adjust the tensioner until the index marks are aligned 90983g73.gif
    Fig. 20: A 3⁄8 inch drive, 10mm, 2 inch torque adapter offset is required to tighten the tensioner bolt (arrow) — 2.0L DOHC engine 90983g75.gif
    NOTE: A 3⁄8 inch drive, 10mm, 2 inch torque adapter offset is required to tighten the tensioner bolt.
  14. Using a 6mm Allen wrench, adjust the tensioner until the index marks are altiming belt broke,engine out of - 90983g74.gifghten the bolt to 17–20 ft. lbs. (22–28 Nm).
  15. Rotate the crankshaft clockwise against the TDC alignment peg, then remove the camshaft alignment tool. Fig. 21: Rotate the crankshaft clockwise against the TDC alignment peg 90983g74.gif

  16. Install the timing and valve covers.
  17. Intiming belt broke,engine out of - next.gife water pump pulley and the splash shield.
  18. Install the spark plugs.
prev.gif next.gif

Posted on Aug 26, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Will valves be broke on 1995 ford escort if timing belt broke


Not necessarily. If you can give me your engine size (I know it's probably 4 cylinder/but please verify so I don't waste any time) I'll let you know exactly. The engines that are the reason for your question are referred to as Interference - I believe. It's either an interference engine or not - if it is, then when you're timing belt snaps, unfortunately all your valves are still going - doesn't mean you'll damage them, but means you can. A belt snapping as you're pulling out of the driveway at 3 mph - not a lot of RPM - may be lucky. Doing 85 on the interstate? More likely damage could occur. I'll double check if you verify engine size/no problem at all. All The Best, Justin McCartney 17 South Industries, LLC

Apr 16, 2016 | 1995 Ford Escort

1 Answer

Supertine belt diagram Ford Escort ZX2 1999 Old brken off now replacing it with new but no picture or diagram showing how its to be installed properly.


If timing belt broke when the engine was running then a belt wont fix your problem as when the belt brakes the valves stop straight away and the crankshaft will still turn over at least 4to6 times adn in that time could AND would bend a couple of valves at least.if
not a lot more problems BUT if you still go ahead with fitting the belt then all the casings are marked to fit the belt and the keyway in crankshaft is always at 12 oclock to start with.. Ron

Oct 13, 2009 | 1999 Ford Escort

1 Answer

Installed a new timing belt. Old timing belt broke


not timed right. You have to remove the plug, and insert a straw through the spark plug hole so that you can see when the piston is all the way up

Sep 19, 2009 | Ford Escort Cars & Trucks

2 Answers

1994 ford escort wont stay in time


Is it getting the correct tension on the belt. Is the belt tension spring broke. Make sure you have the right belt. On the 1.9 engine they changed it in 1992 from a square tooth belt to a round tooth belt or the other way around. I'm not sure. Just make sure the teeth on the gears is the same as the belt. I know you said it was a 1994 but do you know if a previous owned changed the motor?

May 03, 2009 | 1994 Ford Escort

1 Answer

My timing belt broke on my '99 Ford Escort ZX2. Please tell my husband how to replace it. Than k you



 
 
Timing Belt
REMOVAL & INSTALLATION
1.8L Engine
Disconnect the negative battery cable.
Remove the timing belt covers.
Rotate the crankshaft and align the timing marks located on the camshaft pulleys and the seal plate.
Remove the crankshaft pulley and hub.
If the timing belt is to be reused, mark an arrow on the belt to indicate its rotational direction to enable correct re-installation.
Loosen the timing belt tensioner lockbolt and remove the timing belt.
To install:
Temporarily secure the timing belt tensioner in the far left position with the spring fully extended, then tighten the lockbolt.
Make sure the timing marks on the timing belt pulley (crankshaft sprocket) and the engine block (oil pump housing) are aligned.
Make sure the timing marks on the camshaft pulleys and the seal plate are aligned.
Install the timing belt.
Loosen the tensioner lockbolt. Using a suitable prying tool, position the timing belt tensioner so the timing belt is taut, then tighten the tensioner lockbolt.
Turn the crankshaft two turns clockwise and align the timing belt pulley mark with the mark on the engine block.
Fig. 1: Timing marks are located on the camshaft pulleys as shown — 1.8L engines


 
Fig. 2: Make sure that the crankshaft sprocket (timing belt pulley) and oil pump timing marks are aligned — 1.8L engines


 
Fig. 3: Align the timing belt pulley mark with the tension set mark, at approximately the 10 o'clock position — 1.8L engines


 
Fig. 4: Check the timing belt deflection at the location shown — 1.8L engines

Mar 28, 2009 | 1999 Ford Escort

1 Answer

Timing belt cracked Engine in 98 Ford Escort


You can go to a shop that do this kind of work and find out.
Mine broke the timing belt and damage the head. I had a used head put on
It is not very hard to find a ford escort engine.Replacing the engine with a used one would be the cheapest thing to do but change the timing belt right away,
You can do some research on line to find out how much a engine cost.
You can call around where you live.

Mar 16, 2009 | 1998 Ford Escort

4 Answers

Timing Belt Replacement+Diagram


How to replace engine belt 1999 ford escort

Oct 29, 2008 | 1999 Ford Escort

1 Answer

95' 1.9 escort LX died on interstate


Definately have broke the timing belt. The turning over faster did it for me. That is a clear sign the timing belt broke.

Sep 13, 2008 | 1995 Ford Escort

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

694 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76673 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

fordexpert

Level 3 Expert

5537 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...