Question about 2004 Chevrolet Blazer

1 Answer

Replacing an air conditioning compressor clutch.

Posted by on

  • yadayada
    yadayada Aug 26, 2010

    you need special tools to remove and install the clutch, so u have them?

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,559 Answers

The clutch is heat pressed on and usually can't be removed without a spread press,Usually the whole compressor is replaced due to the price of clutch repair.

Posted on Aug 26, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Air conditioning problems


First check that all electrical connections to/from your air conditioning components are tight and secure with no broken or chaffed wires and connectors, or oil swollen connection points. Then check that all fuses and relays involved in the operation of your air conditioning system are operational. If all is good, then remove the belt around the air conditioner compressor pulley. Get a wrench and try to turn the front of the compressor pulley. It should turn with little to no resistance. If it wont move or is very hard to turn, it is probably locked up and needs repair or replacement. If it moves, then the compressor part is OK, but your clutch would likely need replacement. Some model cars its cheaper to just replace the whole compressor than to rebuild the clutch. Jaguar sounds expensive - I would seek out a junk yard. Good luck.

Apr 20, 2014 | 2001 Jaguar S-Type

1 Answer

MY AIR CONDITION WILL NOT BLOW COLD AIR BUT FULL OF FREON


check for compressor clutch operation, if the clutch is engageing you could have a bad compressor or a blockage in expansion valve

Apr 13, 2014 | 2007 Chevrolet HHR Fall

2 Answers

Air condition blows out air but not cold air..do not hear compressor at all


same to you, but i just change my ac compressor by myself. just bought a verey cheao compressor clutch from hexautoparts.com and intalled it with my friend. so cool, winter is coming now...

ac compressor replace-tlqq1re1qsfvxmbhbs2lzbrv-2-0_1.jpg
https://www.hexautoparts.com/a-c-compressor-clutch-fits-acura-tl-v6-2004-2008-honda-accord-v6-2003-2007.html

May 25, 2012 | 2004 Saturn VUE

1 Answer

Im trying to replace the ac clutch on an 04 mustang. i have the clip off but the clutch won't slide off. help please


Clutch and Clutch Field Coil adobe.gif Printable View (235 KB)
Special Tool(s) st1260a.jpg 2-Jaw Puller
205-D026 (D80L-1002-L) or equivalent st1232a.jpg Installer, A/C Compressor Coil
412-065 (T89P-19623-EH) st1235a.jpg Holding Fixture, Compressor Clutch (3.8L vehicles)
412-098 (T94P-19703-AH) st2584a.jpg Holding Fixture, Compressor Clutch (4.6L vehicles)
412-103 (T95L-19703-AH) st1220a.jpg Remover, Differential Bearing
205-116 (T77F-4220-B1) st1234a.jpg Installer, A/C Compressor Field Coil
412-078 (T91L-19623-CH) st1233a.jpg Remover, A/C Compressor Field Coil
412-067 (T89P-19623-FH) Removal
  1. Remove the A/C compressor (19703). For additional information, refer to Air Conditioning (A/C) Compressor - 3.8L or Air Conditioning (A/C) Compressor - 4.6L in this section.
  1. Remove the bolt.
    1. Hold the A/C disc and hub assembly (19D786) with the special tool.
    1. Remove the bolt.
    a0030171.jpg
  1. Remove the A/C disc and hub assembly and the A/C clutch hub spacer (19D648).
    1. Thread an 8 x 1.25 mm bolt into the A/C clutch to force it from the compressor shaft.
    1. Lift the A/C disc and hub assembly and the A/C clutch hub spacer from the compressor shaft.
    al0322a.jpg
  1. Remove the pulley snap ring.
    l10153a.jpg
  1. Remove the A/C clutch pulley (2E884).
    l10154a.jpg
  1. ani_caut.gif CAUTION: Do not use air tools. The A/C clutch field coil (19D798) can be easily damaged.
    Remove the A/C clutch field coil.
    1. Note the location of the A/C clutch field coil electrical connector.
    1. Install the special tool on the nose opening of the A/C compressor.
    1. Install the special tool.
    1. Remove the A/C clutch field coil.
    am2024a.jpg
Installation
  1. NOTE: If installing a new A/C compressor, the A/C clutch components should be reused unless obvious signs of damage are found. If excessive grooving is found, a new A/C clutch disc and hub and A/C compressor pulley must be installed together. Otherwise, each component can be installed individually where needed.
    Visually inspect the A/C clutch disc and hub, A/C compressor pulley and A/C clutch field coil for damage.
    • Inspect for physical damage, including cracked or melted components or discoloration due to excessive heat.
    • Inspect for excessive wear, including grooving in the A/C clutch disc and hub or A/C compressor pulley that is more than fingernail depth.
    • Inspect for roughness in the A/C compressor pulley bearing.
  1. Clean the A/C disc and field coil and pulley mounting surfaces.
  1. ani_caut.gif CAUTION: Do not use air tools. The A/C clutch field coil can be easily damaged.
    Install the A/C clutch field coil.
    1. Place the A/C clutch field coil on the A/C compressor with the A/C clutch field coil electrical connector correctly positioned.
    1. Using the special tools, install the A/C field coil.
    gl2051a.jpg
  1. NOTE: The A/C clutch pulley is a tight fit on the A/C compressor head. It must be correctly aligned during installation.
    Install the A/C clutch pulley.
    l10157a.jpg
  1. Install the pulley snap ring with the bevel side out.
    l10158a.jpg
  1. Place one nominal thickness A/C clutch hub spacer inside the clutch hub spline opening.
    gl2100a.jpg
  1. Install the A/C clutch.
    l10159a.jpg
  1. Using the special tool, install the A/C disc and hub assembly retaining bolt.
    a0030060.jpg
  1. Measure and adjust the clutch air gap by removing or adding A/C clutch hub spacers.
    a0031504.jpg
  1. Install the A/C compressor. For additional information, refer to Air Conditioning (A/C) Compressor - 3.8L or Air Conditioning (A/C) Compressor - 4.6L in this section.
hope this helps

Aug 13, 2011 | 2004 Ford Mustang

1 Answer

2005 Nissan Altima 2.5s 4 cylinder. 1) When stopped in Drive and the air conditioning on - the engine rattles. 2) When stopped in neutral and the air conditioning on - no rattle. 3) When stopped in drive...


no it could be air condition clutch that engage/disengage the air condition compressor and disengage it through the pulley or could be the pulley bearings one of them . also check the solenoid that controls that clutch .
have a good luck sir .

Jun 11, 2011 | 2005 Nissan Altima

1 Answer

Problem with heating and air conditioning. The driver's side is blowing hot air and the passenger side is blowing cold air


Air Conditioner blows warm air
  1. Air conditioner system is discharged. Have the system evacuated, charged and leak tested by an MVAC certified technician, utilizing approved recovery/recycling equipment. Repair as necessary.
  2. Air conditioner compressor clutch not engaging. Check compressor clutch wiring, electrical connections and compressor clutch, and repair or replace as necessary.

Jun 01, 2011 | 2004 Buick Century

1 Answer

10 amp fuse blown, air compressor will not run.


whats the fuse for. if it operate the air conditioning system on the engine fuse box ur compressor clutch is burnt. if its the fuse inside the car it o\powers the hvac controls. put a new fuse on unplug ur compressor clutch connector and turn the engine on switch your air conditioning and heating controls on and off see if it blows the fuse again if it does then u have a problem with ur inside wiring circuit or heating ventilation air conditioning controls. good luck.

Feb 20, 2011 | 2005 Hyundai Sonata

3 Answers

Air conditioning stopped working , no compressor kicking in


try the fuse,then the relay,then the wire going to the clutch on the compressor

Apr 06, 2010 | 2006 Jeep Liberty

Not finding what you are looking for?
2004 Chevrolet Blazer Logo

Related Topics:

149 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8499 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...