Question about 1995 Ford Thunderbird

Open Question

Serpentine belt diagram for 1995 ford thunderbird

Posted by on


6 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

  • 13 Answers

SOURCE: serpentine belt diagram:

if yours has the 3.8L then here is the diagram. Hope this helps
~ Zach


Posted on Jun 16, 2008

  • 2 Answers

SOURCE: serpentine belt diagram:

The belt routing diagram is located on the top radiator cross member by the hood latch. You should see it when you open the hood. If it is not there, all Chrysler, Dodge, and Plymouth minivans, from 1993 to at least 1999, used the same 3.3L engine setup, so find someone with one and look for the diagram where I described.

Posted on Jul 18, 2008

  • 740 Answers

SOURCE: i need a diagram of 1999 ford contour serpentine belt

Here is a digram of your belt. Good Luck and thanks for using FIX YA.

Posted on Jan 24, 2009

  • 15935 Answers

SOURCE: need diagram of serpentine belt for 94Solution for "need diagram for replacing serpentine belt for 94 ford taurus gl w/3 0 v6 engine and a/c" ford taurus gl w/3.0 v6 engine and a/c

89beac5.gif Thanks for using FixYa - a FixYa rating is appreciated for answering your FREE question.

Posted on May 21, 2009

  • 2049 Answers

SOURCE: I need the serpentine belt diagram for a ford

Here are two links to take you to the serpentine belt diagrams... choose your engine type.

V6-24 valve engine
V6--12 valve engine

Posted on Oct 27, 2009

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

I need a serpentine belt diagram for a1997 ford thunderbird 3.8 l

Check with the local autozone, they should be able to print a diagram for you ( you might have to visit more than one store or talk to more than one person to find someone that can find it in their system) . Norm

Dec 20, 2015 | Ford Cars & Trucks

1 Answer

How to find a ford 1996 thunderbird 4.6 v8 serpentine belt diagram?

Sometimes there is a diagram on the radiator support, under the hood. If not, can help you as well.

Jul 15, 2014 | 1999 Ford Windstar

1 Answer

What does a serpentine belt operate and do all the pulleys suppose to work 1995 winstar

I don't know that car in detail, but it appears that there is one belt, driven of course from the crankshaft, driving the A/C, alternator, power steering, and the water pump. It also has an idler pulley and a tensioner pulley. Quite a belting.

Dec 31, 2011 | 1995 Ford Windstar

1 Answer

1996 ford thunderbird 3.8l serpentine belt diagram

Under the hood, near the radiator or front of vehicle there should be a sticker indicating the belt diagram. If not the check your owner's manual under belts and there will also be a diagram there. If you don't have the owner's manual you can purchase a Haynes manual (which is good to have anyway) or consult a dealership as they may print one off for you or at least let you look at it so you can make a sketch of it.

Feb 06, 2011 | Ford Thunderbird Cars & Trucks

1 Answer

Serpentine belt replacement

draw a diagram first of how it goes around the pulleys.make sure its accurate,and each pulley is named,ie aircon,geni,p/steer/crank/,then usually just need to detension belt by backing off the belt tensioner[use good size spanner or fixed socket on bar]slip belt off.the tensioner usually just springs back,fit new belt reverse way,check against diagram before starting

Jul 01, 2010 | 1995 Ford Thunderbird

1 Answer

How do you change the alternator on a 1994 Ford Thunderbird 4.6L V8?

remove the serpentine belt by taking the tension off of the tensioner pulley. do this with a serpentine belt tool. you could also use a 3/4 drive ratchet or 3/4 breaker bar. insert the 3/4 drive into the square drive hole. while facing the front, angle the ratchet as far to the left as possible. remove tension by pulling to the right, remove the belt from the alternator.(note) if there is no diagram of belt routing, make one yourself to facilitate installation. remove the connectors from the alternator, remove 3 bolts, remove the output cable. check the other pulleys for wobble. the tensioner should be replaced, especially if the arm doesn't move smoothly through the length of travel

Feb 24, 2010 | 1994 Ford Thunderbird

1 Answer

Need a diagram for serpentine belt for a 1997 ford 4.6 liter v8

here is an image of the engine in question (on the right) it is not a diagram but shows the track of the serpentine belt

Nov 12, 2009 | 1997 Ford Thunderbird LX

2 Answers

I need a serpentine belt diagram for a 1996 ford thunderbird lx

Go to our local parts store. Most will print off a copy for free.

Sep 04, 2009 | 1996 Ford Thunderbird LX

Not finding what you are looking for?
1995 Ford Thunderbird Logo

Related Topics:

675 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts


Level 3 Expert

76132 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers


Level 3 Expert

5520 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides