Question about 2000 Hyundai Accent

1 Answer

Hard to fill with gas when try to put gas in tank it keeps shutting off the gas hose it acts like i am topping off the gas tank but the tank is far from full

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 4,102 Answers

Hi this is a common problem, the problem is to do with the breather hose from the tank getting blocked this is a common fault, but to replace the breater your going to need to get the tank lowered from the car so you can get to the breather hose on top of the tank.

if your doing this yourself then you will need to get a workshop manual to do this as this is quite a lot of work involved.

their is no easy fix its going to be a case of changing parts on the tank

let me know if you need further assistance ok

plz rate this post as i have a whole page of unrated posts, thanks

Posted on Aug 26, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Gas smell inside car


Being that old, I am Guessing the fuel tank has been removed to replace the fuel pump and the gas tank vent hose was not connected properly or has a smash in it, or not connected, when put back up which will cause the hard to fill up problem as it can not vent the fumes fast enough. Fumes may leak under, then inside the car instead of to the filler neck that goes to the outside of the car. I had that happen. Crawl under, look and feel around to check this.

Sep 08, 2015 | 2005 Honda Civic

1 Answer

PO441 code comes on- Evap purge control valve. also, when filling the gas tank, the nozzle on the gas pump keeps shutting off before tank is full.


Try not putting fuel nozzle in so far. Fuel flow cuts off on back pressure of the air being displaced by the fuel when filling. Can be a problem with narrow neck tanks and some fuel fillers are more sensitive than others.

Aug 19, 2015 | Cars & Trucks

1 Answer

My 2000 ford taurus won't fuel up and we have checked the evap and the vents and they are good the checked the power coming from the slosh module and there wasn't any could that be why it isn't fueling


This is from Fred's Auto on a Ford Taurus Forum:
Hello to your question on the ford taurus being hard to put gas in . replace the filler neck. or remove the filler neck. and when you get the neck out of the tank you will see another tube/hose in the center of the filler tube cut about 2" of the end of the center tube. the problem is that the tube over time with pressure in the tank and tube being soaked in the gas for along period time it gets soft and tube starts to close shut. i find that if you put a hard piece pipe on the end you will never have this problem again. also there is a vent tube on top of the tank(witch you do not have to remove the tank) and make sure it is not crushed shut.. this is a very easy repair. this will 100% fix your problem.

Randy said: well here is what I found. There was a small piece of hose inside my fuel fill hose. It just seem like something was blocking the fuel, so I went under and tried to squeeze on the hose and I couldnot squeeze it into like you should be able to do. so I took the hose clamp loose and hose off end of fill neck and reached inside with needle nose pliers and pulled out a smaller section of hose that I am being now told should not have been in there,by service managers.
Another guy suggests starting your car with the gas cap off.
And some others said look inside for a tiny piece of foil that accidentally came off the top of a fuel additive.
I hope that helps!

Feb 04, 2015 | Ford Cars & Trucks

1 Answer

Gas pump shuts off while filling tank constantly


like answer number 2 up there, California has a Fume Collector over the nozzle, and extends over the hose itself.... its really important NOT to "top it off" after the nozzle shuts off automatically.... it has a tendancy to fill up that vapor space with gas, and you can try to put gas in your car, but it stops each time you pull the "trigger" on the handle (acts like the tank is full) The service station person needs to come out and drain out the excess gas from the hose vapor space. (they are quite familiar with this.... it happens a lot)

Jan 27, 2012 | 2003 Subaru Baja

1 Answer

When filling up with gas the pump cotinually shuts off. the gas tank acts as if it is not venting


You may just have to find a happy medium as to how far you insert the nossle, there's not really any way for the tank to vent other than the fill tube, so you may just try not inserting the nossle all the way to the stopper.

Jan 26, 2011 | 2005 Chevrolet Silverado 2500HD 2WD

2 Answers

2001 Durango acts like the gas tank is full during filling cutting off the pump. The only way to fill tank is to pump gas really slow


Chrysler and Dodge have a fuel vapor filter that allows air out of the gas tank but filters the harmful fumes. Usually the problem happens from topping off your gas after the gas pump stops due to the automatic shut off and then putting more gas in the tank (to make the bill an even $50. or to the next $5 increment, or pumping more in just because it fits). Anyway the filter gets saturated with gas, is not able to breath, and causes a vacuum in the tank. Because of this, the anti-siphon ball is not able to float around and sits at the opening of the fuel fill tube and won't allow any more gas to be put in (acts like the car is full). If you pump super duper slow like put a nickel to hold the gas pump handle, it will trickle in without a problem, but it takes forever! Solution, get the filter replaced and don't over fill the tank.

Sep 11, 2010 | 2001 Dodge Durango

2 Answers

Filling my gas tank the pump keeps shutting off


check the filler neck. the hose may have a kink in it. also check the return line it may be pluged.

Feb 05, 2010 | 2001 Chevrolet Blazer

1 Answer

Having difficulty filling the gas tank. The gas pump keep shutting off when filling the gas tank. It appears that the check valve in the gas tank fill pipe is not workinig properly thus restricting the...


not so much a common problem as it is just! a problem go to a local salvage yard and buy a new filler neck and install it!! its really simple just take the 4-5 screws out of the top filler housing and take a hose clamp off the vent house underneath and then wiggle/pull REALLY!! hard outwards on the neck till it comes out of the tank

Jan 22, 2010 | 2005 Dodge Caravan

Not finding what you are looking for?
2000 Hyundai Accent Logo

Related Topics:

220 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

75807 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8172 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...