Question about Volkswagen Golf

Open Question

Hwo to replace the rear wheel bearings on a VW Golf Mk3

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 101 Answers

SOURCE: how do i replace the rear wheel bearing on my peugeot 206

wheel off remove the tin cap in the centure of the hub undo the big nut put the wheel back on with just 2 bolts finger tight so you can pull the hub off.once the hub is off take the 2 wheel bolts back out.now look in side the hub were the big nut was and you will see a sir clip take that out.then use a socket and a bench vice to press the old bearing out.use the socket and bench vice to put the new bearing back in.

Posted on Aug 01, 2009

Ad
  • 341 Answers

SOURCE: VW Golf Mk3 1997 diesel fuel pump replacement

1993–99 Cabrio, Golf, and Jetta

  1. Remove the negative battery cable.
  2. Raise and safely support the vehicle.
  3. Relieve the fuel system pressure.
  4. Remove the rear seat and the access cover.
  5. Disconnect the wiring and hoses.
  6. Remove the fuel lines from the pump.
  7. On 1993–99 Golf, Jetta and Cabrio vehicles, unscrew the fuel pump retaining ring.
  8. On all other models, remove the mounting bolts and the fuel pump.
  9. Carefully lift out the pump and gauge sending unit assembly.
  10. Empty the fuel pump into an approved container.
To install:
  1. Installation is the reverse of removal. Be sure to use new sealing rings and/or gaskets.

Posted on Nov 29, 2008

  • 119 Answers

SOURCE: Procedure for replacing rear wheel bearings 2000 Forester

i'm assuming you don't have a hubshark,this is a tool that will alllow you to remove the bearing while the knuckle is attached to the car,you may be able to rent this tool at a auto prts store .if not you need to remove the entie knuckle,first remove the trailing arm bolt,then the lateral link bolt{long and stubborn bolt},disassemble the brake shoes and parking brake cable,abs sensor if equipped the knuckle to strut bolt{no marking necessary they are not eccentric} then you need a to use or borrow a press to remove hub and bearings good luck

Posted on Jul 26, 2009

  • 27 Answers

SOURCE: replace rear wheel bearing 2002 ford explorer 4x4

you must remove brakes, then remove axle nut, then remove upper control arm and finally tie rod stabilizer, remove axle from car then bearing can be accessed. this is a difficult job that requires special tools so be careful

Posted on Aug 15, 2009

  • 27 Answers

SOURCE: My VW Golf mk3 fuel gauge has stopped working, it

the sender in the fuel tank my have a hole in the flout witch will make it sink , u can get to it from under the back seat jst take it owt the tank and have a look mite b rusty r dirty cheers

Posted on Oct 07, 2009

Testimonial: "Cheers, will try when I get home from work"

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a MK3 vw golf GTI 2.0 8V Had a wiring


Here is a very helpful link to a wiring diagram for your VW's fuse box.

Wiring Diagram for CE2 vehicles

I hope that this helps!

May 12, 2011 | 1994 Volkswagen Golf

1 Answer

Cannot locate fuses for electric windows on mk3 vw golf cabriolet.os rear went down but will not go up.when switch is operated no power is drawn.


Look above the relays under the dash.There are a few blade type fuses there one of those is the power window fuse.

Feb 21, 2010 | 1993 Volkswagen Golf

1 Answer

Front wheel bearing 1986 Golf


Mount the tool on the wishbone and extract wheel bearing. Application example: ...... KL-0215-410 Press Tool Kit VW Golf III without Hydraulic Cylinder

Jun 28, 2009 | 1986 Volkswagen Golf

1 Answer

I need to replace the front wheel bearing on a 1994 vw golf


They have to be pressed in. VW dealers can do it on the car. The other solution is to remove the steering knuckle and get the bearings over to a machine shop and have them fix it.

Apr 09, 2009 | 1994 Volkswagen Golf

3 Answers

VW Golf maintenance instructions


www.ebookmanual.net/vw-golf-jetta-service-and-repair-manual.html

Dec 14, 2008 | 1997 Volkswagen Golf

2 Answers

Rear Window Switch Problem with Mk3 VW Golf 1.9TD


i had the same problem. After checking the window motor was not the problem i then checked the wiring harnes in the door. I beeped out all the connectors to make sure there were no broken wires and cleaned up all the contacts. The main connector looked quite corroded. I sprayed all the connectors with rust check and reassembled. The window is working fine now

Dec 06, 2008 | 1993 Volkswagen Golf

1 Answer

VW Golf braking system


I just did mine on a MK3 GTI, you turn both sides clockwise. DO NOT turn them anti-clockwise. Also, apply pressure to the piston while turning it. Hope you can learn from my mistakes.

Jul 04, 2008 | 2003 Volkswagen Golf

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

602 people viewed this question

Ask a Question

Usually answered in minutes!

Top Volkswagen Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

yadayada
yadayada

Level 3 Expert

76649 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8522 Answers

Are you a Volkswagen Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...