Question about Mercury Grand Marquis

1 Answer

How do you remove the inside door panel backseat right side of a mercury grand marque 1996

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Mercury Master
  • 6,826 Answers

Door Panels REMOVAL & INSTALLATION 1989–91 Vehicles

  1. Disconnect the negative battery cable.
  2. On 1990–91 vehicles, remove the speaker grille.
  3. Remove the retaining screws from the door inside handle cup.
  4. If equipped with armrest courtesy lamps, remove the lens, detach the bulb and wiring assembly from the pull cup and remove the pull cup.
  5. Working through the pull cup opening, disconnect the remote lock rod from the lock knob.
  6. Remove the retaining screw and the remote mirror bezel nut from the power window regulator housing switch plate, if equipped.
  7. Raise the plate to expose the window switch and power door lock switch and disconnect the switches.
  8. Remove the retaining screws from the armrest finish panel.
  9. Remove the retaining screws from the armrest and remove the armrest.
  10. Using a suitable trim pad removal tool, carefully pry the trim panel plastic push pin retainers from the door inner panel. NOTE: Do not use the trim panel to pry the clips from the door inner panel. Replace any bent, damaged or missing push pins.
  11. Disconnect the radio speaker wiring, if equipped.
  12. Remove the trim panel and watershield. To install:
  13. If the door panel is to be replaced, transfer the plastic push pins to the new panel. Make sure that the watershield is positioned correctly to the door sheet metal. Remove the door pull handle from the old panel and transfer to the new one.
  14. Position the door panel loosely to the door belt opening and route the wiring harness through the appropriate access holes in the panel.
  15. Connect the radio speaker, if equipped.
  16. Align the plastic push pins on the door panel to the holes in the door sheet metal and press the pins into place.
  17. Install the armrest and route the window regulator, remote mirror cable and power lock harness through the access hole.
  18. Install the armrest finish panel.
  19. Install the power window regulator switch plate housing to the armrest connecting the power window switch, power door lock switch and remote mirror bezel nut, if equipped, prior to securing the retainer screw.
  20. Connect the lock remote rod to the lock knob retainer boss. NOTE: Make sure that the remote rod is fully seated into the retainer boss, then function manually or with the power switch to ensure smooth operation of the lock knob.
  21. Install the bulb and wiring assembly.
  22. Install the lamp lens, if equipped, and the pull cup.
  23. On 1990–91 vehicles, install the speaker grille.
  24. Connect the negative battery cable. Fig. 1: Front door panel — 1990–91 vehicles how do you remove the - 84170064.gif
    Fig. 2: Rear door panel — 1989–91 vehicles 84170065.gif
1992–98 Vehicles
  1. Disconnect the negative battery cable.
  2. If removing the driver's door panel, remove the nut from the outside rearview mirror control switch.
  3. Remove the window regulator switch housing by gently prying up, starting at the front. Fig. 3: Front door panel — 1992–98 vehicles 84170066.gif
    Fig. 4: Rear door panel — 1992–98 vehicles
    Fig. 5: Remove the window regulator switch housing by gently prhow do you remove the - 89600p08.jpgrting at the front 89600p08.jpg

  4. Detach all connectors from the switch housing.
  5. Remove the door inside handle cup.
  6. Remove the push pin from the door trim panel upper front extension and remove the screw.
  7. Remove the lower self-tapping screw retaining the door trim panel to the door inner panel. Fig. 6: Detach the swithow do you remove the - 89600p09.jpglectrical connector and remove the housing 89600p09.jphow do you remove the - 89600p01.jpgmi
    Fig. 7: Remove the door inside handle cup 89600p01.jpg

  8. On Grand Marquis, pry up the screw covers from the door pull handle and remove the screws and handle.
  9. Lift the door panelhow do you remove the - 89600p03.jpgsnap out the panel. Fig. 9: There are also retaining screws located in the map pocket as well as . . . 89600p03.jpg
    Fig. 10: . . . along the bottom edge of the door panel 89600p04.jpg

  10. Disconnect the necessary wire harnesses and remove the panel. To install:
  11. Connect the wire harnesses to the door panel, as necessary.
  12. Install the door panel by pushing in and down until it snaps into place.
  13. Install all self-tapping screws retaining the door trim panel to the door inner panel.
  14. On Grand Marquis, install the door pull handle, tighten the screws and install the screw covers.
  15. Install the push pin covering screw on the panel upper front extension.
  16. Install the inside door handle cup.
  17. Install the window regulator switch housing and install the nut on the outside rearview mirror controhow do you remove the - 89600p05.jpg removed.
  18. Connect the negative battery cable. Fig. 11: Lift the door panel upward and snap out the panel to remove it fromhow do you remove the - 89600p06.jpg89600p05.jpg
    Fig. 12: Rotate the door marker lamp bulb andhow do you remove the - 89600p11.jpgrom the door panel 89600p06.jpg
    Fig. 13: Detach the connectors for the trunklhow do you remove the - 89600p17.jpgdoor release switches 89600p11.jpg
    Fig. 14how do you remove the - prev.gifthe relay connector off of the door panel and remove the door panel from the vehicle 89600p17.jpg
prev.gif next.gif

Posted on Aug 26, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Getting to the fuel tank through the backseat? 95' MGM


When I hear situation like this I do it for free,You cant go through the backseat,The fuel tank has to be dropped,Its better to pump the fuel out of the tank From there you need to remove the fuel lines,then you need to remove the fuel inlet hose,Once you have the fuel tank down then you will need to remove the fuel pump flange,one removed you now have access to the fuel pump

Jan 27, 2013 | 1995 Mercury Grand Marquis

1 Answer

Can i chang air ride to shocks on 1996 mercury grand marques rear


You can change to regular shocks, without the air lines. Be sure to get adequate informationon weight of the vehicle. ( tire pressure & chart for front & rear on Driver door stille is a good place to look) It will give weight dimensions for front of the vehicle,loaded & unloaded (usually).

Sep 13, 2011 | 1996 Mercury Grand Marquis

1 Answer

Need to find the computer module with the factory keyless entry code for a 2003 Mercury Grand Marque GS


the code is usually found on stickers on the trunk hinges. if not remove the drivers door panel, the code is on the module that is in the door. use that code to access all functions including setting your own code.

Sep 04, 2010 | 2003 Mercury Grand Marquis

1 Answer

1996 grand am driver side window lift not lifting.


look to see if the track hold down bolts have come lose? and re adjust the track and re tighten them

Jan 15, 2010 | 1996 Pontiac Grand Am

2 Answers

How to replace a fuel filter in a 2001 mercury grand marque v eight g s?


the fuel filter is located inside the frame rail on the passenger side, sort of underneath the rear seat. there are two plastic lines on either side with quick release fittings. i believe its held on my a gear clamp style holder. not too difficult to change.

Dec 11, 2009 | 2001 Mercury Grand Marquis

1 Answer

How to replace passenger side outside mirror on a 1997 Mercury Grand Marquis?


On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. You can then remove the bolts securing the mirror onto the door

Sep 18, 2009 | 1997 Mercury Grand Marquis

1 Answer

Driver's side door panel


They have clips that you can pull them in and out, so try to pull the door panal out slowly and see what happen then ok, get back to me ok.

Jan 11, 2009 | 2001 Mercury Grand Marquis

1 Answer

How do I remove the inside door panel on drivers side


you need to take out the door panal and work from the inside of the panal. Open it from there.

Jan 11, 2009 | 2001 Mercury Grand Marquis

1 Answer

The front drivers door window has fallen off its track and fallen inside the door panel. My car is a 1995 mercury marque. I'm trying to take off the door panel. PS I'm a female so this is new for me . It's...


You'll need to remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. If needed, you can pull back the weather seal (can't reuse it, but it's not that important) and you will be able to access everything inside the door

Dec 12, 2008 | 1995 Mercury Grand Marquis

1 Answer

Passenger side mirror


This is a simple job You must remove the door panel. Then from the inside of the door there is 3 bolts that hold it on pull these bolts and unpluge the connector and thats it.

James

May 26, 2008 | 1996 Mercury Grand Marquis

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

529 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercury Experts

yadayada
yadayada

Level 3 Expert

75197 Answers

fordexpert

Level 3 Expert

5481 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Are you a Mercury Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...