Question about Lexus ES 300

1 Answer

I need color images enlarged view with bolt description and location of engine

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Lexus Master
  • 2,019 Answers

If you do, then you had better tell us the make, model, year, engine, and transmission of the vehicle in question.

But what I would recommend instead is that you just visit a local salvage yard, repair shop, transmission rebuilder, etc. and look at an engine or transmission that is already out.

A manual would also be a good idea, because if you are intending to take the engine out, you need to also know how to take the torque converter off the drive plate, before removing the engine. It is usually done through the starter hole in the engine flange or bell housing.

Posted on Aug 26, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Timing on a 4y motor toyota forklift


images for Timing on a 4y motor toyota forklift

Timing Chain And Sprockets, Cover And Seal - AutoZone

www.autozone.com/.../Toyota.../Engine.../Timing.../_/P-0900c...

AutoZoneToyota Cressida and Van 1983-1990. REMOVAL & ... 1 Exploded view of the timingcover assembly-3Y-EC and 4Y-EC engines. Click image to see an enlarged ...

How do you set the timing for a toyota 4y engine - Fixya

www.fixya.com/cars/t9616067-set_timing_toyota_4y_engine
Jun 29, 2011 - Posted on Jun 29, 2011.

Nov 07, 2015 | Toyota Cars & Trucks

1 Answer

What is the firing order for a 2.4L dohc?


Firing Orders - AutoZone

www.autozone.com/.../Firing-Orders/Firing-Orders/_/P-0996b...
AutoZoneClick image to see an enlarged view ... 2.4L (4G64) DOHC engine with distributorless ignition Firing order: 1-3-4-2 Distributorless ignition system ... Mitsubishi 1996-97 3.0L (6G72) SOHC Engines Firing order: 1-2-3-4-5-6 Distributor rotation: ...Missing: blazer

Sep 30, 2015 | 1996 Chevrolet Blazer

1 Answer

Wire plugs to coil.1994buicklasabre


Wiring Diagrams - AutoZone

www.autozone.com/repairinfo/.../repairGuideContent.jsp?page...
AutoZone5: 1986-88 Buick Lesabre Wiring Schematic. Click image to see an enlarged view ....46: 1997-98 Buick Chassis Schematic. Click image to see an enlarged view.

Mar 01, 2015 | 1994 Buick LeSabre

1 Answer

How to replace a fan relay on a 99 plymouth voyager?


The fan fuse in the 99 Voyager is located in the
under-dash "Power Distribution Center" - the fan fuse is #24 (40Amps - Orange).

How to replace a relay: pull the old one out, then correctly orient and insert the new one.
Its almost impossible to make an orientation mistake, since relays generally can only be
inserted one way (they're deliberately designed to be impossible to insert incorrectly).

Flashers are located either on the bottom of the fuse block or on a module under the dashboard (instrument panel). They are replaced by simply pulling them straight out. Note that the prongs are arranged in such a way that the flasher must be properly oriented before attempting to install it. Turn the flasher until the orientation of the prongs is correct and simply push it firmly in until the prongs are fully engaged.

The 99 Voyager "Power Distribution Center" is located:
Front seating area, driver side, under dash -- see photo below.


_88.gif

For completeness, here's the remainder of the fuse directory for the "Power Distribution Center"

_1953.jpg

Here's the directory of the Relays in the "Power Distribution Center": Note that
"fan relay" is not one of them.

_1955.jpg

Photo of location of "Power Distribution Center" - essentially its under the steering wheel.

_1954.jpg

For completeness, here's a photo of location of the engine compartment "fuse block":

_1956.jpg

Here's a directory of the 99 Plymouth Voyager engine compartment "fuse block"

_1957.jpg

These small-ish images can be enlarged by Right-Click"-ing on them, selecting "Save As..."
then viewing/enlarging them using "Microsoft Picture and Fax Viewer," which should open
these images automatically on most Windows computers by double-clicking on the image file.

Sep 14, 2011 | 1999 Plymouth Voyager

1 Answer

How replace fan belt for Ford Crown Victoria 2000?


Mechanical Fan Belt Removal & Installation - Refer to Illustration below


Ford 4.6L Engine - Ford Crown Victoria, Mercury Grand Marquis, Lincoln Town Car, Marauder

1. Loosen the fan clutch-mounting shaft from the water pump hub.

2. Loosen the fan shroud from its radiator mounting and remove the lower hose from the shroud.

3. Lift the fan and clutch assembly and the fan shroud from the vehicle.

4. If necessary, remove the fan-to-fan clutch retaining bolts and separate the fan from the fan clutch.




CAUTION
Closely examine the fan for cracks or separation, to avoid the possibility of personal injury or vehicle damage.

To install:

1. Assemble the fan and fan clutch. Tighten the retaining bolts to 15-20 ft. lbs. (20-27 Nm).

2. Install the fan and clutch assembly and the fan shroud. Mount the fan clutch shaft to the water pump hub and tighten to 37-46 ft. lbs. (50-62 Nm).

3. Slip the shroud into the lower mounting clips and install the shroud retaining screws.

Fig. 1

archaeology_79.jpg

To view this JPEG image better, you can Right-click on it, "Save Image As..." then
view it or enlarge it within Microsoft Windows Media Player, or Real Networks RealPlayer.

Sep 04, 2011 | 2000 Ford Crown Victoria

1 Answer

How to replace crank shaft position sensor


Click over image for zoom...

zjlimited_1122.jpg

Fig. 1: View of the crankshaft position sensor and its location-1996 5.2L engine shown


zjlimited_1123.jpg

Fig. 2: View of the crankshaft position sensor and its location-1996 4.0L engine shown


Removal & Installation
4.0L Engine
  1. The CKP sensor is located on the transmission bellhousing. Disengage the sensor wiring connector and remove the sensor wiring hold-down clip from the fuel rail.
  2. Remove the sensor mounting bolt and carefully pull the sensor out of the bellhousing.
  3. Installation is the reverse of removal.

5.2L and 5.9L Engine
  1. The CKP sensor is bolted to the top of the cylinder block near the rear of the right cylinder head. Disengage the sensor wiring connector and remove the two sensor mounting bolts.
  2. Carefully pull the sensor out of the cylinder block.
  3. Installation is the reverse of removal.

Hope this helps (remember to rate this answer).

Apr 28, 2011 | 1996 Jeep Grand Cherokee

2 Answers

Is fixing the ultinator yourself an easy job


  1. Disconnect the negative battery cable.
  2. Remove the drive belt.
  3. If necessary, remove any splash shielding for easier access to the alternator.
91072p19.gif

For easiest access to the alternator assembly, first remove the splash shield mounting fasteners ...
Click to Enlarge 91072p18.gif

... then swing it out of the way for access to the alternator assembly
Click to Enlarge 91072p17.gif

View of the alternator electrical connections-(A) battery positive, (B) field terminals, (C) wire harness hold down, (D) ground terminal

  1. Tag and disengage the alternator wiring.

It may be necessary to remove the alternator and mounting bracket from the vehicle as an assembly.

  1. If equipped, remove the front alternator assembly mounting plate.
91072p09.gif

Remove the six nuts and bolts that secure the front mounting plate to the alternator assembly
Click to Enlarge 91072p10.gif

Remove the front alternator assembly mounting plate from below the vehicle
Click to Enlarge

  1. Unfasten the alternator mounting and pivot bolts and remove the alternator.
  2. If installing the original alternator assembly, push out the pivot bushing as illustrated.
91072p11.gif

After removing the alternator assembly front mounting plate, remove the front engine-to-alternator bracket mounting stud
Click to Enlarge 91072p08.gif

Remove the two alternator bracket-to-engine mounting bolts
91072p12.gif

Remove the alternator and mounting bracket assembly from the vehicle
Click to Enlarge 91072p14.gif

If re-installing, the alternator has a pivot bushing on the pivot arm that should be pushed out before installation
91072p15.gif

Mount a C-clamp and 18mm socket on the alternator pivot bushing ...
91072p13.gif

... then compress the C-clamp until it pushes the alternator pivot bushing out

To install:

  1. Mount the alternator to the brackets with the nuts and bolts. Tighten the two mounting bolts and nuts to 40 ft. lbs. (54 Nm).
  2. If the alternator and mounting bracket were removed as an assembly, install the assembly into the vehicle.
  3. If removed, install the front mounting plate.
  4. Engage the alternator electrical connections.
  5. If removed, install the splash shield.
  6. install the drive belt and attach the negative battery cable.
  7. shinehutt_58.gifshinehutt_57.gifshinehutt_56.gifshinehutt_55.gifshinehutt_54.gifshinehutt_53.gifshinehutt_52.gifshinehutt_51.gif
the job is akward ive incl as much info you need to repair yourself

plz comment reply if need more info

Jan 20, 2011 | 1995 Jeep Grand Cherokee

1 Answer

I have a 1995 dodge dakota. I need to replace driver side door. Need to know how to take door off properly. Need diagram or something. HELP.


Removal & Installation
  1. Matchmark the hinge-to-body and hinge-to-door locations. Support the door either on jackstands or have somebody hold it for you.

  2. Remove the lower hinge-to-door bolts.

  3. Remove the upper hinge-to-door bolts and lift the door off the hinges.

88470g00.gif

Details of a common door assembly-Dakota shown
Click to Enlarge

To install:

  1. If the hinges are being replaced, remove them from the door pillar.

  2. Install the door and hinges with the bolts finger-tight.

88470g60.gif

View of the door hinges-1994-96 Pick-ups

Oct 23, 2010 | 1995 Dodge Dakota

1 Answer

Where is the starter located on 2002 intrepid


Underneath the car. somewhere near where the engine and transmission hook up.

Removal & Installation
2.7L Engine

1. Remove or disconnect the following:

Negative battery cable from the remote ground post

Battery feed and posi-lock connectors

Nuts from the catalyst support bracket and mount

Starter heat shield

3 starter-to-engine/transaxle bolts

Starter by rotating it toward the engine and sliding it rearward between the catalyst and the engine mount


To install:

1. Install or connect the following:

Starter by sliding it forward between the catalyst and the engine mount and rotating it away from the engine

Starter and torque the 3 starter-to-engine/transaxle bolts to 40 ft. lbs. (54 Nm)

Starter heat shield

Nuts to the catalyst support bracket and mount

Positive battery cable and torque the nut to 89 inch lbs. (10 Nm)

Posi-lock connectors

Negative battery cable to the remote ground post





3.2L & 3.5L Engines

1. Remove or disconnect the following:

Negative battery cable from the remote ground post

Starter-to-engine/transaxle nut and bolts

Positive battery feed wire from the starter

Starter and position it to gain access to the posi-lock connector



2. Place a support under the engine and slightly relieve the pressure from the left engine mount.

3. Remove the 3 left engine mount-to-engine bolts.

4. Slightly, raise the engine to provide more room.

5. Remove the starter by sliding it rearward between the catalyst and the engine mount.

6. Remove the posi-lock connector.

Click image to see an enlarged view

Fig. Removal and installation of the starter motor



To install:

1. Install or connect the following:

Posi-lock connector

Starter by sliding it forward between the catalyst and the engine mount



2. Slightly, lower the engine.

3 left engine mount-to-engine bolts

Positive battery feed wire to the starter and torque the nut to 89 inch lbs. (10 Nm)

Starter and torque the starter-to-engine/transaxle bolts to 40 ft. lbs. (54 Nm)

Negative battery cable to the remote ground post


Hope this help (remember rated and comment this).

Mar 27, 2010 | 2002 Dodge Intrepid

1 Answer

Starter replacement


  1. Disconnect the negative battery cable.
  2. Raise and support the vehicle safely.
  3. If necessary for access, remove the splash shield.
  4. If equipped, unfasten the flywheel inspection cover bolts and remove the cover.
  5. Label and detach the electrical connectors from the starter.
89632p02.gif Unfasten the starter motor electrical connections. You may want to tag them first to avoid confusion
89632g34.gif Exploded view of the starter motor electrical connections
Click to Enlarge
  1. It may allow more room it you remove the right side cooling fan.
  2. Remove the starter-to-engine bolts, then carefully lower the starter from the vehicle.
89632p03.gif The starter is attached to the engine with 2 mounting bolts (see arrows)
89632p04.gif Unfasten the front mounting bolt (1) and remove any necessary shims (2), noting their locations for installation
Click to Enlarge
89632p05.gif Unfasten the long starter mounting bolt, then remove the starter motor from the vehicle
Before installing the starter motor, make sure the electrical terminals are secure by tightening the nuts next to the cap on the solenoid battery terminal and on the "S" terminal. If these terminals are not tight in the solenoid cap, the cap may be damaged during installation of the electrical connections and cause premature starter failure.
89632g33.gif

Oct 22, 2008 | 1994 Buick LeSabre

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

33 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lexus Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

ROBERT GARCIA
ROBERT GARCIA

Level 3 Expert

902 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you a Lexus Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...