Question about Ford Mustang

1 Answer

1st 2nd 3rd gear whining noise but stops in 4th and so on,

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 662 Answers

This would be an internal bearing inside the gearbox on the input shaft......you have the shft coming in form the engine, and the input shaft houses 1,2, 3rd and 4th gears.....the 5th gear is located on an intermediate shaft.....and then you have the output shaft...now if you had said all gears i would have said output shaft bearing......and if you had said 5th gear only, then this would be the intermedaite gear.....

but you are only saying 1,2 and 3......why its not happening in fourth is that the gear ratios that the shafts turn in correlation to thre gearing changes as you get to 4, like on a 10 speed bicycle but in 4th it is a 1:1 ratio, so no excessive loads on the shafts are noticeable....

This will require a transmission overhaul......

Posted on Aug 26, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The Pacifica will not shift past 4th gear. It shifts normally through 1st, 2nd, 3rd, and 4th gear. Their is no high reeving RPS, no clunking, no lurching. It will just not shift past 4th gear.


is there an OD button that might have been pressed .if it has lots of miles on it it could be needing a flush job . last one I got done was around 100.00 at jiffy lube.

Nov 12, 2015 | 2005 Chrysler Pacifica

1 Answer

Cant get my toyota previa into 2nd gear from 3rd ad 1st also sticks


sound like sincro gon in box u can get them recond at mr gearbox or cheeper 2 get sechand gear box

Feb 11, 2013 | Cars & Trucks

1 Answer

The transmission is hanging up in 2nd gear and not shifting to 3rd, 4th etc. It does not downshift to 1st when the car comes to a stop. I can manually downshift to 1st, upshift to 2nd, but it will not...


The absence of 3rd and 4th is imposed by the transmission computer as a precautionary measure. The system has detected fault and rather than risk doing any greater damage has provided a limp home service. It needs to have a transmission specialist look it over and read the error codes. How do your transmission fluid levels look?

May 28, 2010 | 1993 Honda Accord

2 Answers

Ford transmission wines in 1st 2nd 3rd revers, no


It is a 5 speed manual transmission? If it is noisey in all gears except for 4th, then the problem is countershaft bearings.

Apr 16, 2010 | 1995 Ford Aerostar

1 Answer

What is the function of 1st,2nd,3rd,4th,5th gear?


the function of the gears are to transfer and convert energy created by the engine into momentum

Feb 12, 2010 | 2003 Toyota Corolla

1 Answer

I HAVE A SLIGHT PURRING SOUND FROM THE ENGINE... WHEN I PUT THE CLUTCH IN IT STOPS... ALSO WHEN IM IN 1ST, 2ND AND 3RD GEAR WHEN IM ACCELERATING THERE ISNT A GOOD SOUND FROM IT!! BUT ITS FINE IN 4TH AND...


This would be most likely the first noise of a wearing input shaft bearing. It will only get louder, and eventual failure of the bearing will probably mean catastrophic gearbox failure. It stops when you put your foot on the clutch because the gearbox stops spinning then, and it is quiet in 4th and 5th because there is no side loading (as there is in 1st, 2nd, and 3rd) on the failing bearing. It wouldn't matter what sort of car it was, the gearbox should be overhauled as soon as possible.

Sep 25, 2009 | 2005 Suzuki Swift

1 Answer

What different gear box can fit honda integra xsi vtec 1600cc b16a? i want to change my gear box ,and i want to know what exactly other gear box can fit my car?thanks its a integra bot the product can show...


J1/S1 Found in: Integra XSI/RSI (DA6) Type: Cable 1st: 3.230 2nd: 2.105 3rd: 1.458 4th: 1.107 5th: 0.848 R: 3.000 FD: 4.400 Y1 Found in: CRX/Civic (optional LSD) Type: Cable 1st: 3.166 2nd: 2.052 3rd: 1.416 4th: 1.103 5th: 0.870 R: 3.000 FD: 4.266 YS1 Found in: Integra 92-93 XSI/RSI (DA6, DA9) Type: Cable 1st: 3.307 2nd: 2.105 3rd: 1.458 4th: 1.107 5th: 0.880 R: 3.000 FD: 4.400 S80 Found in: Integra Type R 98+ (LSD) Type: Hydraulic 1st: 3.230 2nd: 2.105 3rd: 1.458 4th: 1.034 5th: 0.787 R: 3.000 FD: 4.785 S80/Y80 Found in: JDM SiR-G (optional LSD) Type: Hydraulic 1st: 3.230 2nd: 1.900 3rd: 1.360 4th: 1.034 5th: 0.787 R: 3.000 FD: 4.400 Y21/Y80/S80/S4C Found in: JDM 96-97 Integra R(LSD) JDM Civic R [EK9](LSD) JDM Civic SiR [EK4, EG6] JDM CR-X DEL SOL SIR (EG2)(optional LSD) USDM DEL SOL VTEC (EG2)(OPTIONAL LSD) Type: Hydraulic 1st: 3.230 2nd: 2.105 3rd: 1.458 4th: 1.107 5th: 0.848 R: 3.000 FD: 4.400

Jun 08, 2009 | 1990 Honda CRX

1 Answer

Sudden noise, whining in 1st gear, reverse jerky


Sounds like your final drive pin in your differential broke causing the main spider pin to tear through the case.Catastropic damage.Check for severe fluid leak under car.If no signs of leaks,check dipstick for greyish blk colored fluid.If this is the case you will need to replace transaxle & flush trans cooler.hope this helps

May 22, 2009 | 1999 Saturn SL

1 Answer

Transmission won't shift to 2nd and 3rd gears goes from 1st to 4th.


Doesn't sound like a simple fix. I would suggest having it serviced.

May 05, 2009 | BMW 318 Cars & Trucks

1 Answer

Tranny problems


Well, you say the noise is in 1st, 2nd, 3rd, and 5th, and I assume this is an overdrive tranny with the overdrive in 5th.

This means your 4th gear is more than probably direct (1:1) ratio.

Meaning you have a bad countershaft bearing(s), or gears...

In direct, your countershaft still spins but carries no power/torque to the wheels (it is basically just freewheeling), input shaft speed/torque goes directly/is locked to the output shaft, so you don't hear the noise; in any other gear, where the countershaft bears a load, you hear the bad bearing or gears.

Either way your tranny has serious internal issues and needs to be rebuilt before it destroys itself.

Aug 15, 2008 | 1996 Nissan King Cab

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

375 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76649 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

fordexpert

Level 3 Expert

5537 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...