Question about 2000 Volkswagen Jetta TDI
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Yes you can get a shorter belt and bypass the ac. It may be as simple as going to the parts store and tell them you have 2001 jetta no ac. Just keep the receipt.
You should also disconnect the a/c compressor connectors/wires/plugs also, try doing this before you bypass the ac first incase doing so gives you warning lights on the dash board.
Also know that the defrost setting uses the a/c so it will take longer to get the condensation off the inside of the window.
Posted on Jul 08, 2008
you need a resister found under your air duct by the passenger floor under dash board auto zone sells these for about 25.00 you may as well buy cabin air filters while your at it . 1 of the screws will be a pain to install back into the duct work I left mine out didn,t make a difference . you might have to order it as they are a comman item oh you will need a vacuum to clean up mess from cabin air filters .this is not a hard job .
Posted on Feb 28, 2009
Hey spend the extra cash and go direct to VW web site, most manufactures offer online manuals for a small fee. well worth it, especially on newer timing belts. its not your old 85 toyota. good luck
Posted on May 27, 2009
is your jetta a 1998 or 2000? the site is showing two different years. here are instructions for a 2000 jetta gl. there is a blower motor resistor in this system. there is also a fuse integral to the resistor. it's all one unit, have to replace the whole thing. here's the step by step:
1.remove the glove box (what you need to get to is behind it)
2.disconnect the electrical connector from the blower resistor
3.disconnect the heater fan electrical connector
4.remove the blower resistor
5.remove the blower motor downward
and to reinstall
1.install the blower motor
2.install the blower resistor
3.connect the electrical connector to the heater fan
4.connect the electrical connector to the blower resistor
5.install the glove box
and of course anytime you work on anything electrical you are supposed to disconnect the battery negative terminal before you start, be warned that you might lose your radio station presets when you disconnect battery
hope that helps
Posted on Jun 01, 2009
Tips for a great answer:
Mar 05, 2014 | 2002 Volkswagen Jetta TDI
Aug 15, 2010 | 2000 Volkswagen Jetta TDI
Apr 17, 2010 | 2002 Volkswagen Jetta TDI
Feb 14, 2010 | 2000 Volkswagen Jetta TDI
Aug 24, 2009 | 2000 Volkswagen Jetta TDI
Jun 29, 2009 | 2000 Volkswagen Jetta TDI
Jun 01, 2009 | 1998 Volkswagen Jetta
Jan 11, 2009 | 2000 Volkswagen Jetta TDI
167 people viewed this question
Usually answered in minutes!