Question about 1996 Chevrolet Monte Carlo

1 Answer

I need a wiring diagram for the window motor and switch. The drivers window will roll down but not back up. I have replaced the switch already and now it is doing it again. I am fairly good with electrical things so I just need to know which wires are for power to the motor. For now I just want to roll the window up, I will figure out the problem later when I have more time. I was planning on just applying power to the correct wires and hopefully that will get the window up before it rains. 96 monte carlo LS

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 81 Answers

It's the motor thats bad, trace the wire to switch from motor. Cut the and use a 9V battery to the wires to roll it up

Posted on Aug 26, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2500HD Pickup... Constant power to rear passenger window motor when key is on.


possibly stuck master switch on drivers door or a relay

Oct 12, 2017 | Cars & Trucks

1 Answer

2009 Elantra passenger power window rolls down but not up


Didn't need to replace the motor

You could have put battery voltage
directly to it & run it in either direction
by switching your power & ground feeds

The problem is a switch not working

If you had a wiring diagram, you would know where
to test for the problem

Unplug the switch & test it,if you can figure it out

May 10, 2014 | 2009 Hyundai Elantra

2 Answers

Hi the passenger side window rolled down one day and wouldnt roll back up so we did some checking and discovered the motor was good so we figured,and was told it probably was the master switch on the...


Need to get a wiring diagram. Buy a book and follow the wiring schematic. It should help you out majorly. Can't really work on electrical issues without one.

Mar 17, 2013 | 2000 Oldsmobile Silhouette

1 Answer

2000 ford explorer master switch problem


Check for broken wires inside the rubber boot from the body to the driver door . Happens all; the time ,wires breaking . Also you should have check for B+ voltage at the master switch before replacing .
How To Diagnose your Power Window Problem Is the Switch or motor bad BUY...
The Trainer 24 Power Window Troubleshooting

Apr 29, 2017 | 2000 Ford Explorer

2 Answers

The passenger rear window won't roll up or down from the drivers controle it clicks in the passenger front door. it will roll down in the passenger rear door but not up. the window modulator rolls up and...


I have the exact same problem on a Jeep Grand Cherokee 2004. The rear passenger window rolls down only from the rear passenger window and won't go up or down from the front. It has to be in the wiring because the problem was intermittent initially and a new window motor does the exact same thing. If you figured it out or have the wiring diagram please let me know.

Apr 22, 2010 | 2004 Jeep Grand Cherokee

2 Answers

Windo motors wont work


The driver side window switch is the master switch, the power or input to either roll the window up or down goes thru that switch. Double check all the connections on the back of the driver side window switch are good. With a DVOM you can also check to see if 12v are even getting to the master switch in the first place. If you aren't even getting power to the main power window switch you could've blown the power window fuse.

Jul 17, 2009 | 1994 Oldsmobile Silhouette

1 Answer

97 Accord drivers side window won't go up or down....


Window motors & regulators go bad every day. Pull your door panel, unplug the motor, if you have an ohm meter apply the leads to the leads into the motor. One will be ground the other two will raise and lower (reverse) the motor. If you show resistance between the leads the motor windings are good and the problem may be the window regulator. If you do not have an ohm meter, you can run two wires (one ground, the other hot) and test the motor by applying elec to it.

Jul 02, 2009 | 1997 Honda Accord

1 Answer

Drivers side fr window rolls down but not back up


try to replace switch or check your wiring might be broke

Jun 30, 2009 | 1997 Jeep Grand Cherokee

1 Answer

Driver side window stuck on Nissan Maxima 2004


It is likely the window motor is wearing out and will need to be replaced. You can always try a different switch on those wires to rule out switch problem. Otherwise, the motor will have to be replaced.

May 25, 2009 | 2004 Nissan Maxima

2 Answers

1994 jeep grand cherokee power window problem


most of the time it is wires in the drivers door that break in the loom

Feb 20, 2009 | 1994 Jeep Cherokee

Not finding what you are looking for?
1996 Chevrolet Monte Carlo Logo

Related Topics:

370 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

80417 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...