Question about 2000 Chevrolet Tracker

1 Answer

No spark from all coil packs - 2000 Chevrolet Tracker

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 3,051 Answers

Hello there:
hopefully you will not have to go thru what i did costed me 1400 to get fixed and didnt need it
first check the ignition control modulator that sits right beneath the coil pac supposed to have electrical grease on it or it will burn up.
Next find and replace if necessary the ignition fuse mine was good but check any way
now the hard ones is the crankshaft sensor and the camshaft sensor both mine were bad .
Next have the ignition checked with a computer if at all possiable there is a anti theft device on it that can go out mine did.
And lastly is the ecu or computer mine went bad because the original mechanic had the key on and disconnected the battery and then reattached the battery and it wiped the computer out ok
I really hope this helps and you dont have to go thru the mioney i had too
Best regards mike

Posted on Aug 25, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Isuzu 2ltr bakkie nmbr 2 and 3 no spark?


post 3, adds, no spark , 2/3 (and still no year, no country stated)
bad coil pack?
wired wrong, this pack.
no photo of the engine, nor real name of it, Petrol.
btw, we dont have "BAKKIE" here. not a single one.
nor KB trucks, either.
what spark system this car has, im clueless.
4 coils or 1 pack.? if one pack , replace all spark wires
if one pack system , if either 2/3 wire opens, both cylinders go dead. try new spark wires. high voltage,

or you measured spark wrong, on 1 pack car.
it takes 2 spark plugs do do that. 2 good plugs and 2 good wires,
#2 and #3, due to the fact they are wired, in SERIES.
see its called wasted spark system, with 1 coil pack and no distributor..
the testing is unique. on this, setup.
try new spark plugs, gapped correctly
and 4 new HV wires,
I bet its go. if not the coil pack is toasted.

Dec 05, 2016 | Isuzu Cars & Trucks

1 Answer

2006 Suzuki forenza no fire from coil pack


what country? this is the WWW, post country for better answers.......!
Only a scope can see the fast 5mS signals to the coil.
so its either the coil pack or the ECU blown. (wires are always suspect)
you never said , all 4 are dead, or 1 or 2, and how many packs.
some non usa cars have wasted (2pak) spark , not 4 COPS.
state what cylinders have spark and which don't.
there are only 2 ways to fix cars.
1: guess and swap parts
2: use tools. my guess is you dont have them.
some coil packs are active (ignitor inside) others just a coil.
you can test the restance of the coils, with a DMM , ohm meter.
if active you cant.
the fsm covers this on all cars.
https://suzukipitstopplus.com/category/3-suzuki-service-manuals.aspx
the 2006 Forenza as delivered to USA has.....
has a large single, dual wasted spark coil pack. (brick)
it does in fact have , internal ignitor drivers. inside. so can not be tested
with and ohm meter on the primary side. but can be on the secondary
you do know how to test wasted spark , right, All spark plugs must be
attached and grounded for the coil to work,
1and 4 are shared.
2 and 3 are shared.
so to test , you must keep the spark plugs (both or all 4 is best)
attached and the shells of spark plugs grounded.
there is a fuse that powers the coil pack. (usa)
the fuel pump relay sends power to the coil pack.
so of that is dead,so will be the pack. (im reading FSM as it type)
get an FSM.
pin 2 on coil pack is power. 12v.
pin 1,is spark 1&4 drive (fast ECU pulse)
pin 3 is 2&3 coil drive. (scope can see it)

recap, are you using the correct wasted spark testing method.
and are all 4 spark plugs dead.?

Feb 18, 2013 | Suzuki Forenza Cars & Trucks

2 Answers

I dont have any spark. have power to the coil pack just nothing past that. what to do??


Check the crank shaft postioning sensor. If you are getting power to the coil pack and there is no power coming out of the coil pack the coil pack might be bad or have corrioson between the coil pack and the mount. Thanks

Mar 07, 2011 | 1999 Mitsubishi Eclipse

1 Answer

I GOT NO FIRE ON THE PLUGS


The spark gets power to spark from coil packs.If the connection between coil pack to spark plug is weak or loose then it will not fire.But if the coil pack as well as the connection between coil pack to spark plugs checked ok then its faulty or dirty spark plugs.Clean the spark plugs with the carb cleaner liquid and let it completely dry.Then check.Also check the voltage between coil pack to spark plugs.If both checked out ok then the other possibility can be weak crank shaft sensor. Thanks.Helpmech.

Nov 12, 2010 | 1995 Dodge Dakota

1 Answer

Ok I have 2002 Jeep Grand Cherokee, I have replaced the spark plugs and the coil rail but still getting the code P0351 and I was wondering if this could be caused by some kind of sensor?


The code indicates the coil pack or spark plug is malfunctioning. You can test this using an additional person. by removing the coil pack and spark plug, place the spark plug into the coil pack and ground the tang on the spark plug to the engine. Have someone start the engine and watch for a blue spark. if there is no spark, then the coil pack is malfunctioning. There is also ways to check the coil packs using a multimeter.

also, bee sure you didnt crack the ceramic part of the plug during initial installation.

Aug 01, 2010 | 2002 Jeep Grand Cherokee

1 Answer

No spark runns fine then loses spark wait 10 minutes starts


The spark plugs receives power to spark from coil pack.Check the power at the coil pack and also check the voltage at the coil pack with meter.If the coil pack shows proper power as well as voltage then its fault in spark plugs.Otherwise its faulty coil pack.The coil pack receives power from battery.so also check the voltage of the battery it should be exact 12 volt.
If the battery shows low voltage then the battery needs to be re-charged.
Then check out.
Thanks. you can rate this solution and show your appreciation.

May 20, 2010 | 1992 Pontiac Bonneville

1 Answer

Dont know how to take master cylinder off to replace coil pack


You shouldn't have to remove it....here are the steps from the tech manual:

Removal & Installation
  1. Disconnect the negative battery cable.
  2. Label and disconnect the spark plug wires from each of the coil pack towers.
3db79bc.gif
Ignition coil removal—2.4L engine

2f61688.gif
Ignition coil removal—3.3L and 3.8L engines


  1. Disengage the electrical connector from the ignition coil pack.
  2. Remove the coil pack mounting fasteners.
  3. Remove the coil pack from the vehicle. If equipped, remove the coil pack from the mounting bracket.
To install:
  1. Place the coil pack into position on top of the engine valve cover, or mounting bracket, if equipped.
  2. Install and tighten the coil pack mounting fasteners to 9 ft. lbs. (12 Nm).
  3. Plug in the electrical connector to the ignition coil pack.
  4. Connect each spark plug wire to each corresponding coil pack tower. The coil pack towers are numbered with the correct cylinder identification. Be sure that the spark plug wires snap firmly onto each coil tower.
  5. Connect the negative battery cable.

Jan 18, 2010 | 2001 Chrysler Voyager

3 Answers

Ignition module where do I find it.


The ignition coils are mounted on it. Just follow the spark plug wires.

Nov 18, 2009 | 2005 Chevrolet Impala

1 Answer

How do i plug in the spark plug coils? what order?


If it's the four cyl., the first coil pack bolts over the #2 spark plug. The #2 coil pack wire plugs into #3 spark plug. The number two coil pack bolts directly over the number four spark plug, and the #2 coil pack wire plugs into the #4 plug. The firing order is 1-4-2-3.

Jun 30, 2009 | 2000 Mazda Protege

1 Answer

Not getting spark


Testing the coil packs.

1. Get an INSULATED wire and hook it to a ground on the car.
2. Get some one to help you
3. pull a spark plug wire off the coil
4. hold grounded wire close to, but not touching, the part where the spark plug wire connects
5. keep hands away from coil and have your helper turn the engine over ( start car and turn off)
6. if there was a spark between the wire and the coil pack it is good. if not, the coil pack needs replaced
7. replace the spark plug wire
8. test the rest

Apr 22, 2009 | 2003 Mitsubishi Galant

Not finding what you are looking for?
2000 Chevrolet Tracker Logo

Related Topics:

128 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

77499 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22306 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...